Makita 9566CV 004051 - Manuals

Page 2 - SPECIFICATIONS; GENERAL SAFETY RULES; Read and understand all instructions.; Failure to follow all; SAVE THESE INSTRUCTIONS

2 SPECIFICATIONS • Manufacturer reserves the right to change specifications without notice. • Specifications may differ from country to country. GENERAL SAFETY RULES USA002-2 (For All Tools) WARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in...

Page 4 - SPECIFIC SAFETY RULES

4 USE PROPER EXTENSION CORD: Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current yourproduct will draw. An undersized cord will cause a drop in line voltage resulting in loss ofpower and overheating. Table 1 shows the...

Page 7 - ASSEMBLY; Installing the wheel guard

7 Speed adjusting dial The rotating speed can be changed by turning the speedadjusting dial to a given number setting from 1 to 5.Higher speed is obtained when the dial is turned in the direc-tion of number 5. And lower speed is obtained when it isturned in the direction of number 1.Refer to the tab...

Page 8 - Installing or removing abrasive cut-off wheel

8 Installing side grip (handle) CAUTION: • Always be sure that the side grip is installed securelybefore operation. Screw the side grip securely on the position of the tool asshown in the figure. Installing or removing abrasive cut-off wheel WARNING: • When using an abrasive cut-off wheel, be sure t...

Page 10 - OPERATION; Operation with abrasive cut-off wheel

10 Installing or removing abrasive disc (optional accessory) NOTE: • Use sander accessories specified in this manual. Thesemust be purchased separately. Mount the rubber pad onto the spindle. Fit the disc on therubber pad and screw the lock nut onto the spindle. Totighten the lock nut, press the sha...

Page 14 - Memo

Page 18 - MAIL THIS PORTION; Your answers to the following questions are appreciated.; Please return this portion by facsimile or mail.

18 1. This product was purchased from: Home Center Hardware/Lumber Store Tool Distributor Industrial Supply Construction Supply Other ( ) 3. How did you learn about this product: Magazine From Dealer Newspaper Store Display Catalog Radio Exhibition From Friend Previous Usage Other ( ) 2. Use of the ...

Page 19 - FACTORY SERVICE CENTERS; RETAIN THIS PORTION FOR YOUR RECORDS

19 FACTORY SERVICE CENTERS 1-800-4-MAKITA RETAIN THIS PORTION FOR YOUR RECORDS ARIZONA 3707 E. Broadway Rd., Ste. 6 Phoenix, AZ 85040 (602) 437-2850 CALIFORNIA 41850 Christy St. Fremont, CA 94538-5107 (510) 657-9881 14930 Northam St. La Mirada, CA 90638-5753 (714) 522-8088 1970 Fulton Avenue Sacrame...

Page 20 - WARNING; MAKITA LIMITED ONE YEAR WARRANTY; Warranty Policy; Makita Corporation

WARNING Some dust created by power sanding, sawing, grinding, drilling, and otherconstruction activities contains chemicals known to the State of Californiato cause cancer, birth defects or other reproductive harm. Some examplesof these chemicals are:• lead from lead-based paints, • crystalline sili...

Makita 9566CV 004051 - Manuals

Manuals:

Manual Makita 9566CV 004051

Summary

Makita Manuals