Makita 9564CVL - Manuals - manualsarea.com

Page 2 - SPECIFICATIONS; GENERAL SAFETY RULES; Read and understand all instructions.; Failure to follow all; SAVE THESE INSTRUCTIONS

2 SPECIFICATIONS • Manufacturer reserves the right to change specifications without notice. • Specifications may differ from country to country. GENERAL SAFETY RULES USA002-2 (For All Tools) WARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in...

Page 4 - SPECIFIC SAFETY RULES

4 24. When servicing a tool, use only identicalreplacement parts. Follow instructions inthe Maintenance section of this manual. Use of unauthorized parts or failure to followMaintenance instructions may create a risk ofelectric shock or injury. USE PROPER EXTENSION CORD: Make sure your extension cor...

Page 7 - ASSEMBLY

7 Speed adjusting dial The rotating speed can be changed by turning the speedadjusting dial to a given number setting from 1 to 5.Higher speed is obtained when the dial is turned in the direc-tion of number 5. And lower speed is obtained when it isturned in the direction of number 1.Refer to the tab...

Page 9 - Installing or removing abrasive disc

9 To remove wheel guard, follow the installation procedure inreverse. Installing or removing depressed center grinding wheel/Multi-disc (optional accessory) WARNING: • Always use supplied guard when depressed centergrinding wheel/Multi-disc is on tool. Wheel can shatterduring use and guard helps to ...

Page 10 - OPERATION; Grinding and sanding operation

10 OPERATION WARNING: • It should never be necessary to force the tool. Theweight of the tool applies adequate pressure. Forcingand excessive pressure could cause dangerous wheelbreakage. • ALWAYS replace wheel if tool is dropped while grinding. • NEVER bang or hit grinding disc or wheel onto work. ...

Page 12 - MAINTENANCE

12 Operation with abrasive cut-off wheel (optional accessory) WARNING: • When using an abrasive cut-off wheel, be sure to useonly the special wheel guard designed for use with cut-off wheels. • NEVER use cut-off wheel for side grinding. During cutting operations, never change the angle of thewheel. ...

Page 14 - Memo

Page 18 - MAIL THIS PORTION; Your answers to the following questions are appreciated.; Please return this portion by facsimile or mail.

18 1. This product was purchased from: Home Center Hardware/Lumber Store Tool Distributor Industrial Supply Construction Supply Other ( ) 3. How did you learn about this product: Magazine From Dealer Newspaper Store Display Catalog Radio Exhibition From Friend Previous Usage Other ( ) 2. Use of the ...

Page 19 - FACTORY SERVICE CENTERS; RETAIN THIS PORTION FOR YOUR RECORDS

19 FACTORY SERVICE CENTERS 1-800-4-MAKITA RETAIN THIS PORTION FOR YOUR RECORDS ARIZONA 3707 E. Broadway Rd., Ste. 6 Phoenix, AZ 85040 (602) 437-2850 CALIFORNIA 41850 Christy St. Fremont, CA 94538-5107 (510) 657-9881 14930 Northam St. La Mirada, CA 90638-5753 (714) 522-8088 1970 Fulton Avenue Sacrame...

Page 20 - WARNING; MAKITA LIMITED ONE YEAR WARRANTY; Warranty Policy; Makita Corporation

WARNING Some dust created by power sanding, sawing, grinding, drilling, and otherconstruction activities contains chemicals known to the State of Californiato cause cancer, birth defects or other reproductive harm. Some examplesof these chemicals are:• lead from lead-based paints, • crystalline sili...

Makita 9564CVL - Manuals

Manuals:

Manual Makita 9564CVL

Summary

Makita Manuals