Makita 6041D - Manuals - manualsarea.com

Page 2 - SPECIFICATIONS; GENERAL SAFETY RULES; Read and understand all instructions.; Failure to follow all; SAVE THESE INSTRUCTIONS; Work Area

2 SPECIFICATIONS • Manufacturer reserves the right to change specifications without notice. • Specifications may differ from country to country. GENERAL SAFETY RULES USA003-2 (FOR ALL BATTERY OPERATED TOOLS) WARNING: Read and understand all instructions. Failure to follow all instructions listed bel...

Page 4 - Service; SPECIFIC SAFETY RULES

4 Service 21. Tool service must be performed only byqualified repair personnel. Service or main- tenance performed by unqualified personnelmay result in a risk of injury. 22. When servicing a tool, use only identicalreplacement parts. Follow instructions inthe Maintenance section of this manual. Use...

Page 7 - Charging; Switch action

7 FUNCTIONAL DESCRIPTION CAUTION: • Always be sure that the tool is switched off beforeadjusting or checking function on the tool. Charging Connect the charging plug to the charging connector, thenplug in the charger to the power receptacle. Charging takes 3hours. CAUTION: • The battery in your new ...

Page 8 - Reversing switch action; ASSEMBLY; Installing or removing driver bit or drill bit

8 Reversing switch action This tool has a reversing switch to change the direction ofrotation. Move the reversing switch lever to the “FWD” posi-tion for clockwise rotation or the “REV” position for counter-clockwise rotation. When the reversing switch lever is in the neutral position, theswitch tri...

Page 9 - OPERATION; Screwdriving operation; Drilling in wood

9 OPERATION Screwdriving operation Place the point of the driver bit in the screw head and applypressure to the tool. Start the tool slowly and then increasethe speed gradually. Release the trigger just as the screwbottoms out. If the trigger is not released, the screw may stripout the hole or the s...

Page 10 - MAINTENANCE; DISPOSING OF TOOL; Removing built-in battery

10 • A stuck bit can be removed simply by setting thereversing switch to reverse rotation in order to back out.However, the tool may back out abruptly if you do nothold it firmly. • Always secure small workpieces in a vise or similar hold-down device. MAINTENANCE CAUTION: • Always be sure that the t...

Page 11 - Recycling the Battery; ACCESSORIES

11 EN0001-1 Recycling the Battery The only way to dispose of a Makita battery is to recycle it.The law prohibits any other method of disposal. To recycle the battery: 1. Remove the battery from the tool. 2. a) Take the battery to your nearest Makita Factory Ser-vice Center or b) Take the battery to ...

Page 12 - Memo

Page 14 - Your answers to the following questions are appreciated.; Certificate of Warranty

14 Your answers to the following questions are appreciated. Date Purchased Model No. Serial No. Initial Last Name Street Address City Province AGE: Male Female Married Single Month Day Year 20 Under 19 20-29 30-39 40-49 Over 50 Paste Paste Paste Paste Paste Paste Paste Paste P aste P aste P aste P a...

Page 15 - Factory Service Centres; CUSTOMER RECORD

15 Factory Service Centres For the authorized service centre nearest you please refer to the local yellow pages directory under “tools” or con-tact our customer service department (Tel) 1-800-263-3734 When you need service... • Explain the problem in a letter • Enclose the letter with the tool • Pac...

Page 16 - Warranty Policy; MAKITA LIMITED ONE YEAR WARRANTY

Warranty Policy Every Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to be free of defects fromworkmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop duringthis one year period, return the COMPLE...

Makita 6041D - Manuals

Manuals:

Manual Makita 6041D

Summary

Makita Manuals