Makita 3006 - Manuals

5 FUNCTIONAL DESCRIPTION CAUTION: • Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Switch action 1 2 003020 CAUTION: • Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the "OFF...

6 Installing or removing drill bit For Model DP3003, DP4001, DP4003 1 2 003052 Hold the ring and turn the sleeve counterclockwise to open the chuck jaws. Place the bit in the chuck as far as it will go. Hold the ring firmly and turn the sleeve clockwise to tighten the chuck. To remove the bit, hold ...

7 Drilling in metal To prevent the bit from slipping when starting a hole, make an indentation with a center-punch and hammer at the point to be drilled. Place the point of the bit in the indentation and start drilling. Use a cutting lubricant when drilling metals. The exceptions are iron and brass ...

8 Makita Corporation Anjo, Aichi, Japan www.makita.com 884328D228