Lucent Technologies Transtalk 9000 - Manuals

Introduction 1-1 Introduction 1 About TransTalk™ 9000 Products Congratulations on the purchase of your new TransTalk 9000 Digital Wireless System MDW 9030P Pocketphone . MDW stands for "Multi-Line Digital Wireless." The MDW 9030P Pocket- phone is the latest addition to the TransTalk 9000 fam...

1-2 Introduction The TransTalk 9000 system enables you to use several different phone and carrier modelsin the same zone, but there are some compatibility issues to consider. You need to knowthe following: ■ The name of the MDW phone (9000, 9010, or 9030P), located in the battery compart-ment of the...

Introduction 1-3 About the MDW 9030P Pocketphone The MDW 9030P Pocketphone is not only wireless, but it is also lightweight and pocket-sized. A removable carrying clip and a lanyard are provided with the handset. You canuse either the clip or the lanyard for hands-free portability. The MDW 9030P als...

1-4 Introduction POWER RADIO PASS SPARE HANDSET REFRESH A B 2 3 4 6 5 MSG 212 555 1212 ON 7 8 C D 1 TransTalk On/Off Feat/P Conf GHI PQRS OPER Trans Hold Redial 1 2 4 JKL ABC 3 DEF 5 MNO 6 TUV 8 0 WXYZ 9 7 Mute Parts List Parts List Parts List Parts List Parts List Along with this book and the MDW 9...

Introduction 1-5 Additional Parts Additional Parts Additional Parts Additional Parts Additional Parts The following parts may be necessary, depending upon your installation. This Kit of Parts is required only when a single (stand-alone) MDW 9030P Pocketphone is installed: Radio Module 11-foot (3.4 m...

Installing the MDW 9030P Pocketphone 2-1 Installing the MDW 9030P Pocketphone 2 Important Safety Instructions This book contains instructions related to safety labels on the product: ! The exclamation point within an equilateral triangle is intended to alert theuser to the presence of important oper...

Installing the MDW 9030P Pocketphone 2-3 Basic Safety Precautions for Installation and Use Basic Safety Precautions for Installation and Use Basic Safety Precautions for Installation and Use Basic Safety Precautions for Installation and Use Basic Safety Precautions for Installation and Use Always fo...

Installing the MDW 9030P Pocketphone 2-5 ■ Use only the power supply (Comcode 847224227) shipped with the carrier. ■ Use only the correct power source. If you are not sure of the power supply to yourlocation, consult your local power company. ■ This product uses a 3-prong plug. Such plugs are design...

2-6 Installing the MDW 9030P Pocketphone Radio Modules and Carriers This section explains how to install radio modules and carriers. You should proceed throughthis section in the following order: 1. “Key Components” 2. “Positioning a Single Radio Module or Carrier(s)” 3. "Wireless Test Mode"...

Installing the MDW 9030P Pocketphone 2-7 Key Components Key Components Key Components Key Components Key Components Each radio module communicates with a corresponding handset. The matching sets are identified by a serial number located on the bottom of the radio module and in the batterycompartment...

2-8 Installing the MDW 9030P Pocketphone A carrier is required when installing two or more MDW 9030P Pocketphones. Using the expansion cable provided with each carrier, you can link up to three carriers. 1 2 3 4 6 4 T RANS T ALK 2 1 O N 2 1 O N 5 CAUTION USE ONL Y AT&T CABLE P⁄N 847667896 IN OUT...

Installing the MDW 9030P Pocketphone 2-9 Positioning a Radio Module or Carrier(s) Positioning a Radio Module or Carrier(s) Positioning a Radio Module or Carrier(s) Positioning a Radio Module or Carrier(s) Positioning a Radio Module or Carrier(s) Each of your handsets and its corresponding radio modu...

2-10 Installing the MDW 9030P Pocketphone ■ The radio module or carrier(s) should not be within 3 feet (.9 m) of any large metalobject, and should not have metal objects in the line of sight to the operating area of thehandset. ■ The radio module or carrier(s) should not be within 6 feet (1.8 m) of ...

Installing the MDW 9030P Pocketphone 2-11 Wireless Test Mode Wireless Test Mode Wireless Test Mode Wireless Test Mode Wireless Test Mode You can determine sound clarity, signal strength, and voice quality using Wireless Test Mode. You should use Wireless Test Mode to help you locate the best place t...

Installing the MDW 9030P Pocketphone 2-13 Go to one of the following sections: ■ If installing one MDW 9030P Pocketphone, go to “Installing a Single Radio Module.” ■ Otherwise, go to “Setting the Power Level.” 1 4 Installing a Single Radio Module Installing a Single Radio Module Installing a Single ...

2-14 Installing the MDW 9030P Pocketphone MODULE 206 PFT PFT E X T E N S I O N S L I N E S MODULE 206 PFT PFT E X T E N S I O N S L I N E S PFT L I N E S MODULE 400 PFT L I N E S MODULE 400 PFT L I N E S PROCESSOR MODULE MUSIC ON HOLD VOL PAGE E X T E N S I O N S E X T E N S I O N S SMDR N S I O N S...

Installing the MDW 9030P Pocketphone 2-15 Setting the Power Level Setting the Power Level Setting the Power Level Setting the Power Level Setting the Power Level If you are installing one or more carriers in a strip mall, high-rise office building, or similarenvironment, the MDW 9030P Pocketphones m...

2-16 Installing the MDW 9030P Pocketphone Use a nonmetallic, pointed object to set each carrier’s DIP switch according to thefollowing table. IMPORTANT: You must set the DIP switch for all of the carriers to the same setting. O N O N O N O N Power DIP Switch Settings 500 to 900 feet(152 to 274 m) 30...

Installing the MDW 9030P Pocketphone 2-17 Setting the Control/Expansion DIP Switch Setting the Control/Expansion DIP Switch Setting the Control/Expansion DIP Switch Setting the Control/Expansion DIP Switch Setting the Control/Expansion DIP Switch You must follow the instructions in this section if y...

2-18 Installing the MDW 9030P Pocketphone Installing a Single Carrier on a Shelf or Desk Installing a Single Carrier on a Shelf or Desk Installing a Single Carrier on a Shelf or Desk Installing a Single Carrier on a Shelf or Desk Installing a Single Carrier on a Shelf or Desk ■ You will not receive ...

2-20 Installing the MDW 9030P Pocketphone 12 1 2 3 4 6 4 TRANSTALK 2 1 O N 2 1 O N 5 CAUTION USE ONL Y AT&T CAB LE P⁄N 8 4766 7896 IN OUT OUT OF S YNC OUT OUT OF S YNC Verify that the carrier’s Out of Sync LED is not lit. If the LED is lit, power down and then repower the carrier. If the LED is ...

Installing the MDW 9030P Pocketphone 2-21 Installing a Single Carrier on a Wall Installing a Single Carrier on a Wall Installing a Single Carrier on a Wall Installing a Single Carrier on a Wall Installing a Single Carrier on a Wall ■ Install high on wall, leaving 6–12 inches (15.2–30.5 cm) between a...

2-24 Installing the MDW 9030P Pocketphone Installing Multiple Carriers Installing Multiple Carriers Installing Multiple Carriers Installing Multiple Carriers Installing Multiple Carriers ■ Install each carrier high on wall, leaving 6–12 inches (15.2–30.5 cm) betweenantennas and ceiling ■ Install eac...

2-30 Installing the MDW 9030P Pocketphone Handset This section explains how to install the handset battery pack, change the communicationssystem setting, and fill out the handset label. Inserting and Removing the Inserting and Removing the Inserting and Removing the Inserting and Removing the Insert...

Installing the MDW 9030P Pocketphone 2-31 Changing the Communications System Setting Changing the Communications System Setting Changing the Communications System Setting Changing the Communications System Setting Changing the Communications System Setting The communications system you use determine...

2-32 Installing the MDW 9030P Pocketphone Filling Out the Handset Label Filling Out the Handset Label Filling Out the Handset Label Filling Out the Handset Label Filling Out the Handset Label The MDW 9030P Pocketphone display shows the status of up to 12 lines or program-mable/intercom/drop buttons....

Installing the MDW 9030P Pocketphone 2-33 Battery Charger This section explains how to choose a location for the battery charger and install it. It alsoexplains how to insert and remove a battery pack. Positioning the Battery Charger Positioning the Battery Charger Positioning the Battery Charger Po...

2-34 Installing the MDW 9030P Pocketphone Plug the battery charger's power cord/ACadapter into a properly grounded 3-prong wall outlet that is not controlled by an on/off switch. 7 Place the keyhole-shaped openings in the backof the battery charger over the screw heads and wall spacers, then slide t...

Installing the MDW 9030P Pocketphone 2-35 Inserting a Battery Pack into Inserting a Battery Pack into Inserting a Battery Pack into Inserting a Battery Pack into Inserting a Battery Pack intothe Spare Battery Compartment the Spare Battery Compartment the Spare Battery Compartment the Spare Battery C...

2-36 Installing the MDW 9030P Pocketphone Inserting the Handset into the Inserting the Handset into the Inserting the Handset into the Inserting the Handset into the Inserting the Handset into theBattery Charger's Handset Cradle Battery Charger's Handset Cradle Battery Charger's Handset Cradle Batte...

3-2 Using the MDW 9030P Pocketphone A B 2 3 4 6 5 MSG 212 555 1212 ON 7 8 C D 1 TransTalk On/Off Feat/P Conf GHI PQRS OPER Trans Hold Redial 1 2 4 JKL ABC 3 DEF 5 MNO 6 TUV 8 0 WXYZ 9 7 Mute A n t e n n a Extend fully or retract fully touse handset. Extend fully tomaximize the handset rangeand voice...

Using the MDW 9030P Pocketphone 3-3 ON Column and Select Buttons Column and Select Buttons Column and Select Buttons Column and Select Buttons Column and Select Buttons The MDW 9030P Pocketphone can display the status of up to 12 lines or programmable/intercom/drop buttons; however, it has only 4 se...

3-4 Using the MDW 9030P Pocketphone Handset Display Handset Display Handset Display Handset Display Handset Display The MDW 9030P Pocketphone display has one 16-alphanumeric-character line, and fourlines of icons to provide you with status information. Note: Note: Note: Note: Note: This illustration...

Using the MDW 9030P Pocketphone 3-9 Enabling or Disabling the Vibrator Enabling or Disabling the Vibrator Enabling or Disabling the Vibrator Enabling or Disabling the Vibrator Enabling or Disabling the Vibrator The vibrator vibrates to alert you to an incoming call in situations where you do not wan...

3-10 Using the MDW 9030P Pocketphone To enable Line Preselection, use the following procedure: 1. Make sure the handset is turned off. 2. Press and hold the Select button ( " ) for three seconds. 3. While still holding " , press O . The handset beeps twice, and the display shows the handset ...

Using the MDW 9030P Pocketphone 3-11 Enabling or Disabling the Alerter Enabling or Disabling the Alerter Enabling or Disabling the Alerter Enabling or Disabling the Alerter Enabling or Disabling the Alerter The alerter is an audible signal to notify you of an incoming call. If a call comes in while ...

3-14 Using the MDW 9030P Pocketphone Performance/Range Test in Wireless Test Mode Performance/Range Test in Wireless Test Mode Performance/Range Test in Wireless Test Mode Performance/Range Test in Wireless Test Mode Performance/Range Test in Wireless Test Mode Using the signal-strength test and the...

Using the MDW 9030P Pocketphone 3-17 Using a Headset Using a Headset Using a Headset Using a Headset Using a Headset Lucent Technologies offers the Supra 9030 headset, which is specifically designed foruse with your MDW 9030P wireless phone. A headset assists in call answering, andprovides hands-fre...

Using the MDW 9030P Pocketphone 3-19 The Battery Charger The Battery Charger The Battery Charger The Battery Charger The Battery Charger The battery charger charges battery packs in the Spare battery compartment and in thehandset. If both are present at the same time, charging in the Spare battery c...

3-20 Using the MDW 9030P Pocketphone The color of the battery charger's LEDs indicates the state of the corresponding batterypack, as shown in the following table: NOTE: NOTE: NOTE: NOTE: NOTE: Before you use the MDW 9030P Pocketphone handset for the first time, the batterypack must be charged. Batt...

Using the MDW 9030P Pocketphone 3-21 Extending Battery Life Extending Battery Life Extending Battery Life Extending Battery Life Extending Battery Life The battery charger will charge a battery pack in the handset if you simply insert thehandset in the battery charger's handset cradle; however, the ...

3-22 Using the MDW 9030P Pocketphone Follow these steps to ensure an uninterrupted supply of power to your MDW 9030PPocketphone: ■ If you have only one battery pack, be sure to refresh it at least once a week. You canrefresh it by: – Placing it in the Spare battery compartment of the battery charger...

Maintaining the MDW 9030P Pocketphone 4-1 Maintaining the MDW 9030P Pocketphone Maintaining the MDW 9030P Pocketphone Maintaining the MDW 9030P Pocketphone Maintaining the MDW 9030P Pocketphone Maintaining the MDW 9030P Pocketphone 4 Impor Impor Impor Impor Important Safety Instr tant Safety Instr t...

Maintaining the MDW 9030P Pocketphone 4-3 Swapping Extensions Swapping Extensions Swapping Extensions Swapping Extensions Swapping Extensions If you want to change your phone’s extension number assignment, make sure the radiomodule or carrier(s) is unplugged before you unplug the telephone line cord...

4-4 Maintaining the MDW 9030P Pocketphone 4 5 1 2 3 4 6 4 TRANSTALK 2 1 O N 2 1 O N 5 CAUTION USE ONL Y AT& T CA BLE P⁄N 847 667896 IN OUT OUT O F SYN C OUT OUT OF S YNC Verify that the carrier’s Out of Sync LED is not lit. If the LED is lit, power down and then repower the carrier. If the LED i...

Troubleshooting 5-1 Troubleshooting 5 Procedures If you have a problem with your MDW 9030P Pocketphone, you may be able to solve it byfollowing the procedures included in this chapter. If you cannot resolve the problem, callfor customer support as described on the inside front cover of this book. Th...

5-2 Troubleshooting Installation Problems (continued) Installation Problems (continued) Installation Problems (continued) Installation Problems (continued) Installation Problems (continued) Symptom Possible Solutions After plugging theradio module orcarrier into anelectrical outlet, oneor more radio...

Troubleshooting 5-3 Installation Problems (continued) Installation Problems (continued) Installation Problems (continued) Installation Problems (continued) Installation Problems (continued) Symptom Possible Causes Possible Solutions * See “Customer Support” on the inside front cover of this book. Af...

5-4 Troubleshooting Possible Solutions Symptom Possible Causes Battery pack is not insertedproperly in the handset. Reinsert the battery pack in thehandset. Insert a battery pack in thehandset. After pressing O , one or more of the followingapplies: ■ Dial tone is notheard. ■ Display does notshow an...

Troubleshooting 5-5 Handset Problems (continued) Handset Problems (continued) Handset Problems (continued) Handset Problems (continued) Handset Problems (continued) Symptom Possible Causes Possible Solutions You can hear theparty on the otherend, but they cannothear you. MUTE appears in thehandset d...

5-8 Troubleshooting Voice Quality Problems (continued) Voice Quality Problems (continued) Voice Quality Problems (continued) Voice Quality Problems (continued) Voice Quality Problems (continued) Symptom Voice quality for calls islower than expected. Possible Causes Possible Solutions You are using d...

Troubleshooting 5-11 Range Problems (continued) Range Problems (continued) Range Problems (continued) Range Problems (continued) Range Problems (continued) (Continued) Handset voice qualityand range are not asgood as they werebefore. Electromagnetic fieldsare interfering. Look for 110/Volt lines, fu...

5-12 Troubleshooting Range Problems (continued) Range Problems (continued) Range Problems (continued) Range Problems (continued) Range Problems (continued) Symptom Possible Causes Possible Solutions Move the handset closer to the radiomodule. Handset is out of range ofits matching radio module. No r...

MDW 9030P Pocketphone Compatibility 6-1 MDW 9030P Pocketphone Compatibility MDW 9030P Pocketphone Compatibility MDW 9030P Pocketphone Compatibility MDW 9030P Pocketphone Compatibility MDW 9030P Pocketphone Compatibility 6 Programming and Programming and Programming and Programming and Programming an...

6-2 MDW 9030P Pocketphone Compatibility NOTE: NOTE: NOTE: NOTE: NOTE: The MDW 9030P Pocketphone is fully compatible with the PARTNER family of commu-nication systems. For the remaining communications systems, however, you mustcarefully note the functional differences between your wireless phone and ...

MDW 9030P Pocketphone Compatibility 6-3 Communications System Compatibility This section describes some communications-system-dependent programming to helpyou optimize the performance of your MDW 9030P Pocketphone. It also describes howthe buttons on a wired phone for your communications system map ...

6-4 MDW 9030P Pocketphone Compatibility Setting the Line-Ringing Options Setting the Line-Ringing Options Setting the Line-Ringing Options Setting the Line-Ringing Options Setting the Line-Ringing Options Use the following guidelines to ensure optimal voice quality when using MDW 9030PPocketphones w...

MDW 9030P Pocketphone Compatibility 6-5 MERLIN Systems MERLIN Systems MERLIN Systems MERLIN Systems MERLIN Systems ■ On MERLIN II and MERLIN LEGEND systems, you must connect your wireless phoneto an available jack on either a 408 outside line/analog telephone module or a 008analog telephone module. ...

6-6 MDW 9030P Pocketphone Compatibility Button Mapping for MERLIN Systems Button Mapping for MERLIN Systems Button Mapping for MERLIN Systems Button Mapping for MERLIN Systems Button Mapping for MERLIN Systemsexcept MERLIN 410 and MERLIN 820 except MERLIN 410 and MERLIN 820 except MERLIN 410 and MER...

6-8 MDW 9030P Pocketphone Compatibility Setting the Line Ringing Options Setting the Line Ringing Options Setting the Line Ringing Options Setting the Line Ringing Options Setting the Line Ringing Options Use the following guidelines to ensure optimal voice quality when using MDW 9030PPocketphones w...

6-10 MDW 9030P Pocketphone Compatibility 2 ABC 1 3 DEF 5 JKL 4 GHI 6 MNO 8 TUV 7 PRS 9 WYZ 0 Oper * # Speakerphone Volume Microphone HFAI Conference Set Fwd Start Timer Rev Stop Exit Contrast Time/ Timer Hold/ Pause Transfer Message Recall BIS-34D B C 1 2 3 A 8 4 5 6 7 D A B 2 3 4 6 5 MSG 212 555 12...

Warranty and Repair Information A-1 Warranty and Repair Information A Lucent Technologies Limited Warrantyand Limitation of Liability Lucent Technologies warrants to you, the customer, that your wireless telephone system willbe in good working order on the date Lucent Technologies or its Authorized ...

A-2 Warranty and Repair Information ■ Abuse, misuse, or negligent acts or omissions of the customer and persons under thecustomer’s control; or ■ Acts of third parties and acts of God. LUCENT TECHNOLOGIES’S OBLIGATION TOREPAIR, REPLACE, OR REFUND, AS SET FORTH ABOVE, IS YOUR EXCLUSIVEREMEDY. EXCEPT ...

Regulatory Information B-1 Regulatory Information B This appendix contains information about the Federal Communications Commission andIndustry Canada. FCC Part 15 Rules The Lucent Technologies MDW 9030P Wireless Pocketphone has been tested and has beenfound to comply with FCC Part 15 Rules. These sp...

Specifications C-1 Specifications C GENERAL Model: MDW 9030P Wireless Pocketphone Dimensions Handset 6.0"(L) x 1.0"(D) x 2.25"(W) 0.33 lbs and Weights: 15.24 x 2.54 x 5.71 cm 0.15 kgs Handset w/Battery Pack 6.0"(L) x 1.0"(D) x 2.25"(W) 0.55 lbs 15.24 x 2.54 x 5.71 cm 0.25 kgs...

C-2 Specifications GENERAL (continued) Electrical Handset 1.0 watt Specifications: Battery Charger (BC) 15 watts (Power) Radio Module (RM) 4.0 watts Carrier (CA) w/6 RMs 24.0 watts Power Supply (BC) 15 watts (10V 1.5 A) Power Supply (RM) 6.0 watts (10V 600mA) Power Supply (CA) 30.0 watts (9V) Batter...

Index IN–1 Index Index Index Index Index A A A A A Alerter 3-4, 3-7, 3-11 Alerter icon 3-4 Answering a call 3-15, 3-17 Antenna 3-2, 3-6, 3-8 replacement 4-4, 4-5 B B B B B Battery charger about 1-1, 3-19 illustration 1-4, 2-34, 3-19 inserting the spare battery pack 2-34 installation 2-32 positioning...

IN–2 Index E E E E E Electrical requirements 2-4, C-2 Environmental requirements 2-2, C-1 Expansion cable 2-7, 2-24 Expansion carrier 2-16, 2-23, 2-24 Extension labels 2-31 Extensions, changing 4-3 F F F F F Feat/P button 3-2, 6-2 H H H H H Handset about 1-1 alerter 3-4, 3-7, 3-11 buttons 3-2, 3-3 c...

Battery Charger Wall-Mounting Template Use the template below to position the screws for mounting your MDW 9030PPocketphone battery charger: 1. Cut out the template along the dotted line. 2. Lightly affix the template to the wall with tape where you want to attach thebattery charger. If possible, ch...

Lucent Technologies 503-801-160 Comcode 107972010 Issue 2 March 1997