Lucent Technologies LULCST - Manuals

Before You Start Before installing your system, read and understand the safety instructions onpage ii (inside front cover). Be sure you have all the necessary parts, tools, andtest equipment, listed below. 1. Read important Safety Information on Page ii.2. Check Shipping Container Contents. n Call S...

Ins t al lati on 2-1 Installation Contents Installation Steps 2-2

2 - 2 In st al la ti on Installation Steps 1. Attach the reversible brackets to the Call Stacker using the 6-32 x 3/8" screws provided, then secure the Call Stacker to a back board or into an equipmentrack. Figure 2-1. Wall Mounted Unit Figure 2-2. Rack Mounted Unit

2 - 4 In st al la ti on Figure 2-3. Page Output Channel Connection of Call Stacker Figure 2-4. Connection to Lucent LUPCM Zone Paging System Figure 2-5. Connection to Telephone Paging Amplifier

Ope ra t ion 3-1 Operation Contents Operation 3-2 ■ Controls and Indicators 3-2 ■ Recording Announcements 3-3 ■ Announcement Playback 3-4 Maintenance 3-5 ■ Troubleshooting 3-5 Specifications 3-5

O peration 3 - 3 Recording Announcements Voice Prompts Enabled 1. Dial up the input station connected to the Call Stacker. The Call Stacker answers the trunk and responds “Enter zone code (Marque el codigo de la zona)” . Proceed to step 2. NOTE: If the number of digits in the paging zone is set to 0...

3 - 4 O pe rat io n Voice Prompts Disabled 1. Dial up the input station connected to the Call Stacker and wait for the Call Stacker to answer the trunk and respond with a high tone. Proceed to step 2. NOTE: If the number of digits in the paging zone is set to 0 (see Table 2-1), skip step 2 and proce...

O peration 3 - 5 Maintenance Troubleshooting There are no serviceable parts in the Call Stacker: If the Call Stacker does not operate during a power failure: n Verify the battery switch is turned ON. n Verify the battery is fully charged. Allow 48 hours to fully charge. Specifications Table 3-2 list...