Lucent Technologies 4424D+ - Manuals

Page 2 - Your Telephone; Line; Spkr; In this User Guide, fixed buttons on your telephone are; Ring Buttons - Calls you make arrive as ringing calls.; In this guide, represents a button that is labeled with an; CampOn

Your Telephone Line Buttons Spkr In this User Guide, fixed buttons on your telephone are indicated by a solid red background ( ). Buttons you label and program are represented by red letters on a white background ( ). Line buttons are buttons used to make or receive inside or outside calls. Line but...

Page 3 - You have put a call on hold on this line button.; To use the speakerphone, press .

Steady red The line you are using or will use when you lift the handset or press . Steady green The line is in use, or the feature programmed onto the line button is on. Flashing green An incoming call is ringing on this line button, or a call you transferred is returning on this line button. Fast-f...

Page 4 - Confirmation (double break in dial tone followed by steady; Tones; long ring

Dial tone (steady tone) You can make a call. Busy (slow repeating tone) The phone you are calling is busy. Fast busy (fast repeating tone) No lines are available. Error (alternating high-low tones) You dialed or used a feature incorrectly. Confirmation (double break in dial tone followed by steady t...

Page 5 - To answer an outside or inside call, do one of the following:; Press a programmed; To make an outside call:; Press the button.; To make an inside call:; Do one of the following:; Call Handling; HFAI

To answer an outside or inside call, do one of the following: Press .Lift the handset.Use the headset. To enable Hands-Free Answer on Intercom: Press a programmed button, which allows you to respond to voice-signaled (not ringing) intercom calls without having to lift the handset or press any button...

Page 6 - To transfer a call to a voice mailbox:; Direct Voice Mail; To transfer a call using the dialpad:; AutoDial

To transfer a call to a voice mailbox: 1 : Do one of the following: Press the programmed button, a n d p r e s s . Press the programmed button (see "Direct Voice Mail" under "Covering Calls Features"). Select Direct Voice Mail from the display ( DicVM or Direct VM ). You cannot selec...

Page 7 - The system puts the call on hold and selects an button.; Conf; Green Light; appears on the display.; Hold

Call Handling While connected to the first party: 1 : Press . The system puts the call on hold and selects an button. 2 : Connect with the next party. You can connect to the next party by: Dialing an outside telephone number or an extension.Retrieving a call on hold.Answering an incoming call. 3 : P...

Page 8 - To program a button:; Using Features; To use a feature, do one of the following:; Press; Feature

To program a button: 1 : Label a button as "Feature." 2 : Press . 3 : Lift the handset. 4 : Enter programming mode by pressing . 5 : Press the button you labeled. 6 : Press . 7 : Exit programming mode by pressing . Using Features To use a feature, do one of the following: Press and then sele...

Page 9 - EXT; pause; Headset Status. Press to switch between; Headsets

Using Features EXT 0 0 # 0 0 # 7 8 2 Features that dial numbers automatically may need special characters to allow for correct dialing or system response. Inserts 1 5 second pause in the dial sequence. Consecutive pauses are allowed. P appears on the display. Sends switchhook flash. Must be first en...

Page 10 - Programming and Feature Codes; Call Waiting; Call Handling Features; Drop

To use Hands-Free Answer Intercom (HFAI), you must program an HFAI button onto a button. When you press , you can talk to a person who calls you on an intercom call without lifting the receiver. To program an HFAI button: + lift handset + + + + . To program onto a button: + lift handset + + + + . To...

Page 11 - , where you can broadcast an announcement through the; Loudspeaker; , where you can broadcast an announcement over a; Paging; Group Paging; To program onto a button:; While on the call, press; Park

There are two types of paging: Group , where you can broadcast an announcement through the speakerphones of telephones on extensions that are placed into paging groups. Loudspeaker , where you can broadcast an announcement over a loudspeaker connected to the system. To broadcast an announcement to a...

Page 12 - Pickup; General; Group Pickup

To program onto a button: + lift handset + + + + . Pickup allows you to answer calls that are ringing, parked, or on hold anywhere in the system. There are two types of Pickup: Individual and Group. Use Individual Pickup to pick up a call for one specific extension. Use Group Pickup to answer calls ...