LOREX QLR0440 - Manuals - manualsarea.com

Page 2 - Hardware Installation; For detailed setup information,

QLR0440 SERIES QSG_eN_r3 Page 1 Hardware Installation STEP 1 For detailed setup information, please refer to your User’s manual. NOTE: Please turn off the computer’s power prior to installing the QLR Capture Card. If you are unfamiliar with installing PC hardware, it is recommended to have a PC tech...

Page 3 - Camera Installation; Before you install a camera, carefully plan where and

QLR0440 SERIES QSG_eN_r3 Page 2 Camera Installation STEP 2 Before you install a camera, carefully plan where and how you will position the camera, and where you will route the cables. 1. connect the female end of the supplied 60’ extension cable to the camera. 2. confirm that the arrows on the diN c...

Page 4 - Driver Installation on Local; VistaPro4 software CD includes both Video

QLR0440 SERIES QSG_eN_r3 Page 3 Driver Installation on Local Computer (Server) STEP 3 VistaPro4 software CD includes both Video and Audio Drivers. It is recommended that you install the Video Driver first and follow the same steps to install the Audio driver. 1. Once you turn on your Pc after insert...

Page 5 - VistaPro4 Software Installation on Local Computer (Server); It is recommended to connect the cameras

QLR0440 SERIES QSG_eN_r3 Page 4 VistaPro4 Software Installation on Local Computer (Server) STEP 4 It is recommended to connect the cameras to your PC prior to installing the VistaPro4 software application 2. Open to view the contents from within the install folder. 3. double click to execute the Set...

Page 6 - Register for Lorex DDNS

QLR0440 SERIES QSG_eN_r3 Page 5 Register for Lorex DDNS STEP 5 1. Retrieve System Information: in order to register for Lorex ddNS, you need to make a note of your computer’s Physical id (Mac address). click on “Start” (located and the left side of your monitor screen) then click on “run” and type “...

Page 7 - Setup DDNS (on VistaPro4 Server Software)

QLR0440 SERIES QSG_eN_r3 Page 6 STEP 6 Setup DDNS (on VistaPro4 Server Software) 1. double click on the “VistaPro4 Server” icon from your desktop to open the VistaPro4 Server software and click on the “Setup” icon. You will now be asked to enter the user confirm “user id” (admin by default) and “Pas...

Page 8 - Software Installation on Remote Computer (Client)

QLR0440 SERIES QSG_eN_r3 Page 7 4. double click the VistaPro4 Server icon from your desktop to open it. You will see the live images if the cameras are connected. You will also see “iP registered” if your settings are right. if you see “iP failed”, please recheck your settings. NOTE: Click “Unblock”...

Page 9 - Enable DDNS (on VistaPro4 Client Software); NOTE: Please make sure that VistaPro4

QLR0440 SERIES QSG_eN_r3 Page 8 STEP 7  Congratulations! You have completed Step 8 successfully. Your computer is now ready to view, record and play back video remotely using Lorex ddNS. Enable DDNS (on VistaPro4 Client Software) NOTE: Please make sure that VistaPro4 Server Software is running whil...

Page 10 - How to Connect BNC Cameras (not included); GO WIRELESS WITH ADVANCED LOREX SURVEILLANCE ACCESSORIES; CONNECT in minutes; TIPS

QLR0440 SERIES QSG_eN_r3 Page 9 FOr MOre iNFOrMatiON & PrOduct SuPPOrt, visit w w w. l o r e x c c t v. c o m How to Connect BNC Cameras (not included) 1. connect BNc female end of the camera to the BNc Male end of the connector. 2. connect the rca cable. 4. connect your camera Power adaptor to ...