LOREX LW2702 - Manual

N O R T H A M E R I C A : 1 - 8 8 8 - 4 2 5 - 6 7 3 9 ( 1 - 8 8 8 - 4 2 - L O R E X )M E X I C O : 1 - 8 0 0 - 5 1 4 - 6 7 3 9I N T E R N A T I O N A L : + 8 0 0 - 4 2 5 - 6 7 3 9 - 0 ( E x a m p l e : F r o m t h e U K , d i a l 0 0 i n s t e a d o f + ) T e c h n i c a l S u p p o r t ( f o r t e ...

NO DEVUELVA ESTE PRODUCTO A LA TIENDA 3 maneras sencillas de comunicarse con nosotros : NE RETOURNEZ PAS CE PRODUIT AU MAGASIN 3 façons faciles de nous contacter :  L’AméRiqUE dU NORd: 1-888-425-6739 (1-888-42-lorex)mEXiCO: 1-800-514-6739iNTERNACiONAL: +800-425-6739-0 (Ejemplo: desde el Reino Unido...

Important Safeguards 3 Important Safeguards In addition to the careful attention devoted to quality standards in the manufacture process of your video product, safety is a major factor in the design of every instrument. However, safety is your responsibility too. This sheet lists important informati...

Important Safeguards 4 Service 13. Servicing - Do not attempt to service this video equipment yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 14. Conditions Requiring Service - Unplug this video product ...

General Precautions 5 General Precautions 1. All warnings and instructions in this manual should be followed 2. Remove the plug from the outlet before cleaning. Do not use liquid aerosol detergents. Use a water dampened cloth for cleaning 3. Do not use this unit in humid or wet places 4. Keep enough...

Features 6 Features Technology ƒ Ultra Digital Wireless technology features the latest advancements in wireless video surveillance ƒ Minimizes interference with other devices such as wireless routers, cordless phones, Bluetooth devices and is Wi-Fi friendly ƒ 100% Digital video and audio provides ex...

Table of Contents 7 Table of Contents Getting Started ................................................................................................................................................ 9 LCD Monitor/Wireless Receiver ........................................................................

Getting Started 9 Getting Started The system comes with the following components: CHECK YOUR PACKAGE TO CONFIRM THAT YOU HAVE RECEIVED THE COMPLETE SYSTEM, INCLUDING ALL COMPONENTS SHOWN ABOVE. 1 x 7” LCD MONITOR/WIRELESS RECEIVER 3 x POWER ADAPTERS (FOR RECEIVER & CAMERAS) 2 x MOUNTING KITS 1 X...

LCD Monitor/Wireless Receiver 10 LCD Monitor/Wireless Receiver Rear Panel 1. Wireless Antenna : Position the antenna as needed for best reception. 2. Power : Slide button to turn the LCD receiver ON/OFF. 3. MENU : Press to open the Main Menu. 4. Channels/Navigation Joystick : QUAD MODE ONLY—Move UP ...

Camera 11 Camera 1. PIR Sensor : Passive IR motion sensor for more accurate motion recording. 2. Microphone : Built-in microphone underneath camera body. 3. Lens : Camera lens. 4. Night Vision IR : Night vision IR LEDs used for viewing in complete darkness. 5. Speaker : Speaker for two-way audio. 6....

Remote Control 12 Remote Control 1. 1/ : Move menu cursor UP; change time settings; start/pause playback; jump to camera 1 while in Quad Mode; 2. Enter : Confirm menu selections. 3. 4/ : Move menu cursor LEFT; rewind playback; jump to camera 4 while in Quad Mode; decrease values in certain menu opti...

Installing the Camera 13 Installing the Camera Before you install the camera, carefully plan where and how it will be positioned, and where you will route the cable that connects the camera to the power adapter. • Before starting permanent installation, verify its performance by observing the image ...

Connecting the LCD Receiver 14 Connecting the LCD Receiver The LCD Receiver can be setup for use on a tabletop, or mounted to a wall or underneath a counter or cupboard. Table Mounting To set up the wireless receiver: 1. Attach the Tabletop Stand to the slot on the rear panel and turn counter clockw...

Connecting the LCD Receiver 15 3. Connect the cable from the power adapter to the 5V DC port on the bottom panel of the receiver, and then plug in the power adapter to an outlet or surge protector. 4. Place the receiver in a location that will have a clear reception to your camera*. Rotate the table...

Connecting the LCD Receiver 16 Under-the-Counter, Wall, or Ceiling Mounting To set up the wireless receiver: 1. Select a location to mount the receiver, i.e. under a counter or cupboard, wall or ceiling. The location should have a clear reception to your camera*. Place the mounting stand in the desi...

Connecting the LCD Receiver 18 LED Indicators on the LCD Receiver Use the LED indicators on the LCD receiver to observe the status of the receiver, cameras, and SD card. The blue lights indicate the following: • NEW : A new video file has been recorded to the SD card • FULL : The SD card is full NOT...

Using the System 19 Using the System By default, the camera included with your system is automatically paired to the wireless receiver. The camera and receiver will communicate with one another once they are powered on. On-Screen Display With camera 1 properly connected and powered on, the system di...

Viewing Modes 21 Viewing Modes There are four different viewing modes available on the system: single channel viewing, Auto Sequence Viewing Mode (view individual channels automatically in sequence), Quad mode, and Screen Saver Mode. To change viewing modes: • Press the Channel—A button to enable Au...

22 Quad Mode Use Quad mode to view up to four cameras simultaneously. To enable/disable Quad mode: • Press the QUAD button . The Schedule Recording warning appears briefly on-screen (see figure 5.2), then the Quad display mode begins. NOTE : The signal indicator or SD card icon are not shown while t...

23 Screen Saver Mode Use the Screen Saver mode to conceal the fact that the LCD receiver is actually a surveillance recorder. The system comes pre-loaded with five scenic images that let the LCD receiver simulate a picture frame. When motion is detected by a camera, the LCD receiver will display the...

24 Motion Detection With the Screen Saver activated, motion detection is enabled on the system. When motion is detected by one of the cameras, the LCD receiver will display the triggered camera in single-channel full-screen, and the motion alarm will beep, but the system will not record. When the mo...

Setting the Time 25 C C a a m m 1 1 R R E E C C 160602-2.AVI 2009 07 17 16:32:05 Setting the Time It is highly recommended to set the time on the system prior to recording. You need to set the correct date and time in order to use Schedule Recording. For more details, see “Motion Recording” on page ...

Recording 26 Recording Three recording modes are available on the system: Manual Recording, Schedule Recording, and Motion Recording. NOTE : An SD card must be inserted in the wireless receiver in order to record. You should always format the SD card prior to initial recording. For details, see “For...

Recording 27 Manual Recording Manual Recording allows you to manually start/stop recording from one channel at a time . You cannot record while in Quad mode. You can also record while in Zoom mode. For details on using Zoom, see “Zoom” on page 52. NOTE : You cannot change channels or enable Auto Seq...

Recording 28 Schedule Recording Use Schedule Recording to have the system automatically record continuously from a selected camera or from Auto Sequence Viewing Mode according to a start and stop time. You must set a Recording Schedule in the main menu in order to use Schedule Recording. NOTE : Plea...

Recording 29 Figure 7.2 Schedule Recording on the receiver –“AUTO REC” must not appear in order for Schedule Record to function To enable schedule recording: 1. Disable ALL RECORDING on the system: • If the system is in Manual Recording, press the Record— button • If the system is in Motion recordin...

Recording 30 Motion Recording Use Motion Recording to have the system only record when motion is detected by one of the cameras. The camera that appears on-screen is the only camera that is recording. To enable Motion Recording: 1. Press the Motion button. “AUTO REC” will light up on the LCD receive...

Recording 31 The “REC” indicator will only appear when motion is detected by one of the cameras on-screen. By default, the system is set to record for 15 seconds after the triggered motion event. For details on adjusting the motion recording time, see “Trigger Record” on page 41. When Should I Use M...

Viewing Recorded Video 32 Viewing Recorded Video With video recorded on the SD card, you can open the File menu to playback the video files. You can playback recorded video on the system (when connected to a TV or monitor) or directly from the SD card – simply connect the SD card to your computer. V...

Viewing Recorded Video 34 Controlling Playback Once the file begins playing, use the buttons on the remote control or wireless receiver to control playback. To control playback: ƒ : Play/Pause playback; restart video from the beginning ƒ : Fast forward playback 2X, 4X, 8X, 16X, 32X, and 64X. During ...

Viewing Recorded Video 35 Viewing Video Directly From the SD Card You can view the saved video files on your computer (PC or Mac) by using an SD card reader (not included). Saved video files are in AVI format. NOTE : Some PCs and Macs may have an SD card reader built-in. Please refer to your compute...

Using the Intercom 36 Using the Intercom Use the Intercom feature for two-way communication between the LCD receiver and the camera. Talk the person at the camera from behind closed doors for added security. NOTE : Please make sure the camera(s) is properly connected prior to using the Intercom. To ...

Using the Main Menu 37 Using the Main Menu Use the Main Menu to configure camera and receiver settings. To open the Main Menu: • Press the MENU button on the wireless receiver or the remote control NOTE : Make sure the display is in single channel full-screen view prior to opening the Main Menu 1. C...

Using the Main Menu 38 Camera On/Off Use the Camera On/Off menu to show/hide camera channels on the main display screen. For example, if you disable camera 3, it will not appear in single channel full-screen, or in Quad mode. NOTE : If a power failure occurs on your system, you may need to re-config...

Using the Main Menu 39 Record Use the Record menu to change image quality, motion recording time, set a recording schedule, and enable/disable overwrite. The Record menu contains the following sub-menus: • Quality : Set the image resolution to 320x240 (QVGA) or 640x480 (VGA) • Trigger Record : Set t...

Using the Main Menu 41 Trigger Record Use the Trigger Record menu to set the length of the time for the system to record after motion is detected by a camera. To change the motion recording time: 1. From the Main Menu select Record and press the Enter button . 2. From the Record menu select Trigger ...

Using the Main Menu 44 Pairing Use the Pairing menu to pair additional cameras (up to 4) to the system. By default, the camera included with your system is automatically paired to channel 1 on the wireless receiver. The camera and receiver will communicate with one another once they are powered on. ...

Using the Main Menu 45 To pair an additional camera: 1. Connect the camera to a power outlet. DO NOT permanently mount the camera. 2. Press MENU on the wireless receiver or remote control. 3. From the Main Menu, select Pairing and press the Enter button . 4. Select Camera 2 , Camera 3 , or Camera 4 ...

Using the Main Menu 46 Settings Use the Settings menu to set the system time, change display options, and format the SD card. The Settings menu contains the following sub-menus: • Date & Time : Set the date and time on the system • Brightness : Adjust screen brightness level • AV out : Select th...

Using the Main Menu 47 Date & Time Use the Date & Time menu to set the time and date on the system. You must set the date and time in order to use Schedule Recording. For details, see “Schedule Recording” on page 28. To set the date and time: 1. From the Main Menu, select Setting and press t...

Using the Main Menu 48 Brightness Use the Brightness menu to adjust the brightness level of the LCD screen. To adjust brightness: 1. From the Main Menu, select Setting and press the Enter button . 2. From the Settings menu, select Brightness and press the Enter button . 3. Press LEFT/RIGHT to increa...

Using the Main Menu 49 AV Out Use the AV out menu to select the TV system for the wireless receiver. To select the TV system: 1. From the Main Menu, select Setting and press the Enter button . 2. From the Settings menu, select AV out and press the Enter button . 3. Select NTSC (North America) or PAL...

Using the Main Menu 50 Screen Saver Use the Screen Saver menu to select an image for Screen Saver mode. To configure the Screen Saver: 1. From the Main Menu, select Setting and press the Enter button . 2. From the Settings menu, select Screen Saver and press the Enter button . 3. From the Screen Sav...

Using the Main Menu 52 Zoom Use the zoom menu to enable 1X and 2X digital zoom on the cameras. While zoomed in, you can scan the image and view channels in full-screen. NOTE : Zoom is intended as a temporary setting that is applied to ALL CHANNELS. When you are finished using zoom, you should return...

Using the Main Menu 53 Format Use the Format menu to format the SD card. It is highly recommended to format the SD card prior to initial recording. To format the SD card: 1. Insert the SD card into the SD card slot on the right panel of the wireless receiver until you hear a “click.” Please insert t...

Using the Main Menu 54 Default Use the Default menu to restore the system to factory settings. To restore factory settings: 1. From the Main Menu, select Setting and press the Enter button . 2. From the Settings menu, select Default and press the Enter button . 3. Select Yes and press the Enter butt...

Appendix A: System Specifications 55 Appendix A: System Specifications General Description Specification Transmission Frequency ISM 2,400~2,483.5 MHz Transmission Power 14dBm Unobstructed Effective Range 100 m (line of sight) Spread Spectrum FHSS Modulation Mode GFSK Operating Temperature 14 ~ 122° ...

Appendix B: About Digital Wireless Technology 56 Appendix B: About Digital Wireless Technology The Digital Wireless signal transmission type used by the Lorex LW2702 series is also known as FHSS –Frequency Hopping Spread Spectrum . This type of signal is highly resistant to deliberate jamming as it ...

Appendix C: Adding Cameras 57 Figure 15.0 Pairing menu Appendix C: Adding Cameras The system comes with cameras that have already been paired to the LCD receiver. The Pairing Function assigns each camera to a different channel on the wireless receiver (up to four cameras), and is necessary for confi...

Appendix D: Strengthening the Range of the Wireless Signal 58 Appendix D: Strengthening the Range of the Wireless Signal Is your wireless signal choppy? Do you want to extend the range of wireless transmission? There are several ways to boost your wireless signal as well as options to help you exten...

Appendix D: Strengthening the Range of the Wireless Signal 59 2.4 GHZ Directional Wireless Panel Antenna Use the 2.4GHz Directional Wireless Panel Antenna (model #: ACCANTD9 ) to focus a wireless signal onto one specific camera in order to increase range of transmission (clear line-of-sight between ...

Appendix E: Deleting Video Files on the System 60 Appendix E: Deleting Video Files on the System You can delete video files on the SD card directly on the system. Deleting files if you need to clear space on the SD card (if Overwrite is disabled), or for your own file management purposes. For detail...

Appendix F: Estimated Recording Times on SD Cards 61 Appendix F: Estimated Recording Times on SD Cards Use the table below to help you estimate the recording times on various sizes of SD cards. Times shown are in hours, minutes, and seconds. NOTE : The system is compatible with SD High Capacity (SDH...

Appendix G: Power Failure 62 Appendix G: Power Failure A power failure may interrupt recording modes on the system. After power is restored, the following will occur: • The system will restart in Auto Sequence Mode + Motion Recording – this ensures that some form of recording will be immediately act...

Troubleshooting 63 Troubleshooting If you have problems with your System, there is often a quick and simple solution. Please try the following: Problem Solution There is no picture from a Camera. • Check power to the Camera. Make sure the adapter is plugged in and the red LED light on the power adap...

FAQ 64 FAQ Q: What is the maximum distance I can have between the camera and the receiver? A: Typically 450 feet (137 m) with a clear line of sight in open space, or approximately 150 feet (46 m) in a house. Walls, studs, furniture will interfere with the range of wireless transmission. Q: Why does ...

Enhance your security with genuine Lorex Cameras, Digital Video Recorders, Integrated Systems and Accessories. Order whatever you need at www.lorexcctv.com or call 1-888-42-LOREX (1-888-425-6739) SEE HEAR PROTECT PROTECT EVERYTHING THAT MATTERS Warehouse CVC6998HR Office CVC6993R Day Care LW2602 Con...