Page 2 - CAUTION
2 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO A QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert...
Page 3 - Important Safeguards; Installation
3 Important Safeguards Important Safeguards In addition to the careful attention devoted to quality standards in the manufacture process of your video product, safety is a major factor in the design of every instrument. However, safety is your responsibility too. This sheet lists important informati...
Page 4 - Service
4 Important Safeguards Service 13. Servicing - Do not attempt to service this video equipment yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 14. Conditions Requiring Service - Unplug this video product ...
Page 5 - FCC CLASS B NOTICE; NOTE
5 General Precautions FCC CLASS B NOTICE Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation....
Page 7 - Table of Contents
7 Table of Contents Table of Contents Getting Started .......................................................................................... 8SG17L7584 - Front - Primary Function Buttons ................................... 9-12SG17L7584 - Front - Secondary Function Buttons .........................
Page 8 - Getting Started
8 Getting Started Getting Started The SG17L7584 system comes with the following components: CHECK YOUR PACKAGE TO CONFIRM THAT YOU HAVE RECEIVED THE COMPLETE SYSTEM, INCLUDING ALL COMPONENTS SHOWN ABOVE. 17” Color 2 Page / 8 Channel Dual Quad LCD Monitor 4 x 1/4” CCD Color IR Day/Night Cameras (with...
Page 9 - SG17L7584 - Front - Primary Function Buttons
9 SG17L7584 - Front - Primary Function Buttons SG17L7584 - Front - Primary Function Buttons 1. FN (FUNCTION) BUTTON - When this button is pressed, the LED below the button will turn ON indicating that secondary function of the front panel buttons can be activated. To de-activate the secondary functi...
Page 13 - SG17L7584 - Front - Secondary Function Buttons
13 SG17L7584 - Front - Secondary Function Buttons SG17L7584 - Front - Secondary Function Buttons 15. ALRS (ALARM RESET) BUTTON - To reset an alarm when it is active, press the [FN] button to activate the secondary functions (note that the LED below the button will turn on), and press the ALRS button...
Page 16 - Remote Control
16 Remote Control Remote Control Listed below is a quick reference for the Remote Control. For details on specific features, refer to the SG17L7584 - Primary / Secondary Buttons on Pages 10-14.
Page 17 - Installing Cameras; Mounting Bracket Installation
17 Installing Cameras Installing Cameras The SG17L7584 Observation System includes 4 - 1/4” CCD Color IR Day/Night Indoor/Outdoor Cameras* * Picture changes from Color to B&W under low light conditions. Mounting Bracket Installation Installation Warnings: • Install the camera away from direct su...
Page 18 - Connecting Cameras; DIN Connected Cameras; BNC Connected Cameras
18 Connecting Cameras Connecting Cameras The SG17L7584 Observation System includes 4 x 1/4” Color CCD DIN Cameras. Additional cameras can be added to the 4 additional camera inputs using the DIN or BNC ports. OBSERVATION SYSTEM DIN Connected Camera (4 x 1/4” CCD Included) BNC Connected Camera (Optio...
Page 19 - Monitor Features
19 Monitor Features Monitor Features The SG17L7584 Observation System has adjustable tilt and height positioning. The height can be adjusted using the thumbscrews at the base. • Loosen the thumbscrews (located on the lower left and right sides of the base) • Adjust the Monitor to the desired height ...
Page 20 - Cable Channel
20 Cable Channel Cable Channel The SG17L7584 Observation System comes with a built in cable channel to easily organize and conceal wiring. 1. Remove the Cable Channel Cover. 2. Connect the Power Cable, Cameras, Ethernet Cable and any Alarm Devices to the System by running the cables through the hole...
Page 21 - Main Menu Control
21 Main Menu Control Main Menu Control Enter the MENU screen by pressing the MENU button. Scroll through the 9 options by pressing the UP and DOWN buttons. To enter a sub-menu, navigate to the option and press the OK button. To exit a SUBMENU , select the RETURN option (and press the OK button) whic...
Page 23 - Sequence Set
23 Sequence Set [SEQUENCE SET] QUAD-ACH1CH2CH3CH4QUAD-BCH5CH6CH7CH8RETURNEXIT :::::::::::: 03 SEC03 SEC03 SEC03 SEC03 SEC03 SEC03 SEC03 SEC03 SEC03 SEC[ ] [ ] This submenu allows you to change the length of time a camera is displayed while the SEQUENCE (SEQ) feature is enabled. When in SEQUENCE mode...
Page 25 - Title Set
25 Title Set 4. RETURN - Return to the MAIN MENU . Navigate by pressing the K and L buttons to highlight, and press the OK button to select 5. EXIT - Return to the camera view. Navigate by pressing the K and L buttons to highlight, and press the OK button to select Title Set 1. DISPLAY - Sets the ca...
Page 26 - Alarm Set
26 Alarm Set Alarm Set 1. ALARM - Configures the ALARM type for an alarm event. Navigate by pressing the K and L buttons to highlight, and press the OK button to switch between DISPLAY modes: • OFF - Alarm function is turned OFF • OSD (On Screen Display) - When the alarm occurs, the OSD displays [AL...
Page 27 - Motion Set
27 Motion Set Motion Set 1. MOTION - Sets the motion detection alarm mode. Navigate by pressing the K and L buttons to highlight, and press the OK button to switch between MOTION alarm modes: • OFF - Motion Detection is disabled • OSD (On Screen Display) - Visual alert only [MD] • OSD + BUZZER - Bot...
Page 29 - System Set
29 System Set System Set 1. KEY BUZZER - Sets the audible BUZZER that can be heard when pressing any key to ON or OFF . Navigate by pressing the K and L buttons to highlight, and press the OK button to select Y or N. 2. LOSS BUZZER - Sets the audible BUZZER ON/ OFF when a loss of channel signal is d...
Page 31 - Monitor Set
31 Monitor Set Monitor Set 1. CONTRAST - Adjust the image contrast. Navigate by pressing the K and L buttons to highlight, and press the OK button to select. Press the K and L buttons to change the CONTRAST (maximum of 63). Press OK to accept the changes. 2. BRIGHT - Adjust the image brightness. Nav...
Page 32 - NetViewer - Installation Requirements
32 NetViewer - Installation Requirements NetViewer - Installation Requirements The NetViewer software (included with the Observation System) has the following installation requirements. Minimum System Requirements: Recommended System Requirements : Please refer to the NetViewer Installation Guide in...
Page 33 - Network Connectivity
33 Network Connectivity Network Connectivity The SG17L7584 Observation System can be remotely controlled using your existing network and the provided NetViewer software. OBSERVATION SYSTEM ROUTER (Not Included) PC (Not Included) INTERNET 1. Connect the Observation System to the Router using the supp...
Page 34 - Setting Up Your DDNS Account
34 Setting Up Your DDNS Account Setting Up Your DDNS Account Lorex offers a free DDNS server for use with your System. A DDNS account allows you to set up a web site address that points back to your Local Network. The following outlines how to set up your free DNS account. 3. Complete the Account In...
Page 36 - Using the Lorex IPEdit Application; Finding Your External IP Address
36 Using the Lorex IPEdit Application Using the Lorex IPEdit Application The Lorex IP Edit application allows you to find and change the details of your Lorex network device (i.e.. Observation System, DVR, or IP Camera). 1. Connect the LAN output of the OBSERVATION SYSTEM to your router using the pr...
Page 37 - Router Port Forwarding
37 Router Port Forwarding Router Port Forwarding How do I enable Port Forwarding on my Router? You will need to enable port forwarding on your Router to allow for external communications with your Observation System. Computers, Observation Systems, and other devices inside your network can only comm...
Page 38 - Troubleshooting
38 Troubleshooting Troubleshooting When a malfunction occurs, it may not be serious and can be corrected easily. The following describes the most common problems and solutions. Please refer to the following before calling your Observation System dealer Problem: Observation System Unit is not receivi...
Page 40 - Observation System Specifications - Appendix #1
40 Observation System Specifications - Appendix #1 Observation System Specifications - Appendix #1 Display 17” TFT LCD Pixels (H x V) 1280 H x 1024 V Pixel Arrangement RGB Vertical Strip Pixel Pitch 0.264 x 0.264 White Luminance 260 cd/m ² (typical) Contrast Ratio 450:1 (typical) Camera Capable Up t...
Page 45 - Installing a Sensor
45 Connecting Motion / Alarm Device - Appendix #6 Connecting Motion / Alarm Device - Appendix #6 Motion detection and Alarm controls are enabled through the Menu system on the Observation System. Additional motion sensor devices can be connected to the system (Motion Sensors, Door/Window Sensors). O...
Page 47 - Optional Accessories
47 Optional Accessories Optional Accessories The following accessories are available to add to your existing system CABLE Extends the length between the CAMERA and MONITOR. Available in 65’, 100’ and 250’ lengths DVR UNIT Accessory DVR units - Record and Replay from your Observation System QUAD LOOP...
Page 49 - It’s all on the web; VISIT
It’s all on the web Product Information User Manuals Quick Start Guides Specification Sheets Software Upgrades Firmware Upgrades Strategic Vista International Inc. VISIT wwwlorexcctv.com www.lorexcctv.com
