LOREX LW2002 Series - Manual

w w w . l o r e x c c t v . c o m

L W 2 0 0 2 S e r i e s Q u i c k S t a r t G u i d e _ R 2

P a g e

PORTABLE COLOR LCD DIGITAL WIRELESS

MONITORING SYSTEM

LW2002 SERIES - QuICk START GuIDE

Skill Level

Intermediate

easy

advanced

Time

under 30 minutes

under 15 minutes

under 60 minutes

Hand Tools

Hardware

Router

Hi Speed

over 60 minutes

Skill Level

Intermediate

easy

advanced

Time

under 30 minutes

under 15 minutes

under 60 minutes

Hand Tools

Hardware

Router

Hi Speed

over 60 minutes

Time

Tools

Skills - Easy

Under 15 Min

utes*

Hand Tools

Plug & Play connections,

On screen set up

* Installation time may vary based on

application and camera location

Getting Started

The Digital Wireless Surveillance System

comes with the following components:

1 x Wireless Receiver

1 x Receiver Cradle

1 x Wireless Camera(s)*

1 x Power Adaptor (for receiver)

1 x Power Adaptor (for camera)*

1 x RCA Audio/Video Cable

Instruction Manual

Quick Start Guide
*Number of cameras and power adaptors may vary

by model. Check your package for specific content

information.

A.

Installing the Camera

Wireless cameras require a power source (either an electrical outlet

or battery power) to operate.

NOTE:

Before you install a camera, carefully plan where and

how it will be positioned, and where you will route the cable that

connects the camera to the power adaptor. Before starting permanent

installation, verify its performance by observing the image on a

monitor when the camera is positioned where it will be permanently

installed.

Connect the Power Adaptor to the 9V

Input on the back of the camera.

2

When adding cameras that were not included in the original box,

you will need to pair up the camera with the receiver. Please refer to

the Camera Pairing Section of the User Manual.

Wall Mounting:

Mark the position of

the screw holes on the wall.

• Drill holes and insert 2 screws.

• Firmly attach the camera to the wall by

placing the stand over the installed

screws and pushing the base

downwards to secure.

Position the Base holes over the

screws. Slide the base downwards.

Camera Positioning: The Camera can be placed on

a flat surface, or wall mounted. The versatile stand

allows for several different mounting options.

Desk/Counter Mount

Wall Mount

NOTE:

See Page 2 for battery operation instructions.

Night Vision :

The camera has built-in IR LEDs, which provides the

camera with the ability to view images in no/low light conditions. It

is important to use the provided power adaptor (and not batteries)

when using the camera for prolonged periods in low light conditions,

as the built-in IR LEDs will drain the battery more

quickly than during regular daytime use.

B.

Connect the Receiver

Connect one end (black connector

plug) of the RCA Audio/ Video

Cable to the Receiver or Receiver

Cradle.

Place the Receiver Cradle

or Receiver in a location

that offers clear reception

with your camera(s).

Determine if you will be using the Receiver Cradle, or connecting the cables directly to the receiver before installation.

2

Plug the AC adaptor power output cable into the

9V POWER input of the Cradle or directly into the

Receiver. Plug the power plug into a wall outlet or

surge protector.

NOTE:

Leave the receiver to charge

for 4 hours prior to first time use so

the built-in rechargeable receiver

battery is fully charged. DO NOT

remove the power cable from the

receiver / from the cradle during

initial charging process. After initial

charge, charge as required.

Once the Receiver is fully charged the

LED light above the DC 9V input on the

receiver will turn from RED to GREEN.

Connect the other ends (Audio

- white plug, Video - Yellow plug)

of the RCA cable to your Monitor

or TV.

Turn on Monitor or TV, and switch to

the video channel that the receiver has

been connected to.

2

3

NOTE:

The purpose of the AV output is for convenience only. When using with large

screen TV/Monitor, the picture might be grainy as the camera limits video resolution to

VGA (640x480 pixels).

This is not a product defect.

For best performance use with

TV/Monitor PIP (Picture in Picture) function. Check your TV/Monitor product manual to

see if this feature is available on your TV/Monitor. This allows you to view TV or other

video source and see video from the camera in a small window on the same screen.

View your Receiver images on any Monitor or TV

with RCA inputs (note that this requires the receiver

to be connected to AC power, not battery power).

Tip 1:

If your TV has a PIP feature, you

can have the camera images displayed in

the PIP window. Check your TV manual

for info on PIP feature (if available).

2

NOTE:

AVOID INSTALLING IN

A LOCATION WHICH REQUIRES

THE WIRELESS SIGNAL TO PASS

THROUGH CEMENT, CONCRETE

AND METAL STRUCTURES. THIS

WILL REDUCE THE

TRANSMISSION RANGE.

NOTE:

The receiver monitor turns off

when it is connected to a Monitor or TV.

OPTIONAL

OPTIONAL

Set the alarm sensitivity on the camera.

Turn the wheel on the side of the camera

all the way down to decrease sound

sensitivity. This means that the alarm is

only triggered by loud noises. Turning

the wheel the other way will result in

the opposite. See the User’s Manual for

complete details on the alarm function.

3

The LW2002 series product is

expandable up to 4 cameras.

To order additional cameras LW2002WAC1

Series (white) or LW2002BAC1 Series

(black), please visit our website at

www.lorexcctv.com

Tip 2:

Connect to RCA input on a VCR,

DVD recorder or Surveillance DVR to

record video from the LW2002 system.