LOREX LW1012 - Manuals - manualsarea.com

Page 2 - Wireless Disclaimer:

2 Thank you for purchasing the LW1010/LW1012 Color Wireless Series Surveillance System. Lorex is committed to providing our customers with a high quality, reliable security product. http://www.lorexcctv.com CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RICK OF ELECTRIC SHOCK DO ...

Page 3 - Important Safeguards; Installation

Important Safeguards 3 ENG Important Safeguards In addition to the careful attention devoted to quality standards in the manufacture process of your video product, safety is a major factor in the design of every instrument. However, safety is your responsibility too. This sheet lists important infor...

Page 4 - Service; Use

Important Safeguards 4 Service 13. Servicing - Do not attempt to service this video equipment yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 14. Conditions Requiring Service - Unplug this video product ...

Page 5 - General Precautions; LOREX TECHNOLOGY INC.

General Precautions 5 ENG General Precautions 1. All warnings and instructions of this manual should be followed 2. Remove the plug from the outlet before cleaning. Do not use liquid aerosol detergents. Use a water dampened cloth for cleaning 3. Do not use this unit in extremely humid or wet places ...

Page 6 - Table of Contents

LW1010 / LW1012 Features 6 LW1010 / LW1012 Features ‘EWT’ Eliminates Interference From Most Household Devices Fast & Easy Installation- Plug Into any AC Outlet Receiver Connects to any TV/VCR/DVD Recorder Indoor / Outdoor Night Vision Camera Built-in Microphone for Listening Ability ...

Page 7 - Getting Started

Getting Started 7 ENG Getting Started The System comes with the following components: CHECK YOUR PACKAGE TO CONFIRM THAT YOU HAVE RECEIVED THE COMPLETE DVR, INCLUDING ALL COMPONENTS SHOWN ABOVE. 1 x WIRELESS RECEIVER 1 x POWER ADAPTOR (FOR RECEIVER) 1 x RCA VIDEO CABLE 1 / 2 x CAMERA BATTERY ADAPTOR...

Page 8 - Wireless Receiver; Control Buttons

Wireless Receiver 8 Wireless Receiver 1. DC 9V INPUT – Connection port for the 9V Power Adaptor (provided with this system). Connect the Power Adaptor to a power source. NOTE: It is recommended that the receiver be connected to a surge bar or similar to protect the equipment from damage. 2. CAMERA C...

Page 9 - Wireless Receiver Installation; Installation Warnings:

Wireless Receiver Installation 9 ENG Wireless Receiver Installation 1. Connect the AV Cable to the back of the receiver. Connect the other end of the Cable to the Video IN (Yellow) and Audio IN (White) ports on the TV, VCR or other viewing monitor. 2. Plug the Receiver power cable into the 9V POWER ...

Page 10 - Installing the Camera:; Wall Mounting Instructions

Camera Installation 10 Installing the Camera: 1. Carefully unpack the Camera. 2. Decide whether the camera will be permanently wall mounted or sit on a tabletop: • If you decide to place the camera on a tabletop or other flat surface, the camera can easily be moved to different locations as desired....

Page 11 - Connecting Camera Power

11 ENG 4. Replace the camera in the desired mounting position. Tighten the side screw to secure the camera to the Stand. Adjust the angle of the camera until the desired view is set. Connecting Camera Power The Camera can be powered either by using the provided Power Adaptor, or using a 9v battery a...

Page 12 - Troubleshooting

Troubleshooting 12 Troubleshooting If you have problems with your System, there is often a quick and simple solution. Please try the following: Problem Solution There is no picture from a Camera. • Check all connections to the Camera. Make sure the adaptor is plugged in. • Make sure that the Cameras...

Page 14 - It’s all on the web; VISIT

It’s all on the web Product Information User Manuals Quick Start Guides Specification Sheets Software Upgrades Firmware Upgrades Lorex Technology Inc. VISIT www.lorexcctv.com www.lorexcctv.com