LOREX DXR43000 Series - Manuals

Page 2 - CAUTION

I The DVR converts analog video into digital format and records them on a removable hard disk drive. Digital video allows you to quickly access and search for a specific time segment or event which has been recorded. This system features three different quality settings providing recording capabilit...

Page 3 - II; NOTE

II NOTE This equipment has been certified and found to comply with the limits regulated by FCC, EMC and LVD. Therefore, it is designed to provide reasonable protection against interference and will not cause interference with other appliance usage. However, it is imperative that user follows this ma...

Page 4 - III; CONTENTS

III CONTENTS 1 GENERAL PRECAUTIONS ...................................................................................... 1 2 CAUTIONS AND DVR FEATURES .......................................................................... 3 3 SYSTEM INCLUDES: .......................................................

Page 5 - GENERAL PRECAUTIONS

1 1 GENERAL PRECAUTIONS Read Instructions All of the safety and operating instructions should be read and understood before the product is used. Retain Instructions The safety and operating instructions should be retained for future reference. Heed Warnings All warnings on the product and the instru...

Page 7 - CAUTIONS AND DVR FEATURES; DVR FEATURES

3 Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such ...

Page 8 - RAM: 256 MB RAM or more

4 • Recording Speed: 60 fields/sec • Security password protection • On Screen Display and Real Time Clock Function • Remote Control as well as Main Panel operation • Supports 20 ~300 GB HDD • Quick Multiple Search capability • Viewing options: Quad, Sequential, PIP, Full Screen • Supports Pan/Tilt c...

Page 9 - SYSTEM; CHANNEL DVR

5 3 SYSTEM INCLUDES: • (1) 4 CHANNEL DVR • Optional (1) HDD, 20~300 GB • (2) KEYS FOR CARTRIDGE • (4) CABLES • (1) POWER ADAPTER AND CORD • (1) OWNER’S MANUAL • (1) NETVIEWER SOFTWARE CD CHECK YOUR PACKAGE TO MAKE SURE THAT YOU RECEIVED THE COMPLETE SYSTEM, INCLUDING THE COMPONENTS SHOWN ABOVE. 4 CH...

Page 10 - MODEL :XXXXXXXXXXXXXXXXXXXXXX

6 4 GETTING STARTED 1. Connect the AC Power Cord to the Power Adapter and plug it into an electrical outlet. 2. Connect up to 4 cameras to the BNC video inputs on the back of the DVR. 3. Plug in the power adapter to the back panel. The Red LED indicator will illuminate and the DVR will be in the sta...

Page 11 - SUBNET MASK

7 Note: The above message indicates the network values set in the DVR. Note: The settings for the network values can be changed in the MAIN MENU SETTINGS. *** NETWORK INFOMATION *** MAC ADDRESS : XX XX XX XX XX XX IP ADDRESS : 192 . 168 . 001 . 150 SUBNET MASK : 255 . 255 . 255 . 000 GATEWAY : 192 ....

Page 12 - DESCRIPTION OF PARTS AND FUNCTIONS; CABINET FOR CARTRIDGE CASING

8 5 DESCRIPTION OF PARTS AND FUNCTIONS 5.1 FRONT PANEL CABINET FOR CARTRIDGE CASING FUNCTION BUTTONS DISPLAY BUTTONS

Page 14 - ZOOM: Press arrow button to zoom in or out.

10 1. ARROW/CHANNEL BUTTONS ( e CH1, d CH2, c CH3, f CH4) These buttons perform the following functions: a) Displays a picture in Full Screen In Quad 1 mode: Select the Channel 1 button and hold it for 2-3 seconds to view Camera 1 in Full Screen. To view the other camera locations, press CH2, CH3, a...

Page 15 - If the USB Key is connected to the DVR and it is not recognized or the

11 5. PIP / COPY BUTTON (Picture in Picture) NOTE The PIP function is only accessible by the remote control. The PIP Button allows you to view two camera locations simultaneously, one being the main channel, the other being viewed as a sub-picture. Dual PIP can also be selected, which displays two s...

Page 17 - REMOTE CONTROL SENSOR

13 TIMER: The LED will be ON when the schedule recording is set (i.e. when you set up the DVR to record automatically in SCHEDULE REC SET, see THE MAIN MENU SETTINGS, page 19). ALARM: LED will be ON when the ALARM or MOTION function is set to ON. When the ALARM or MOTION function is ON, the LED will...

Page 18 - FRONT PANEL – HARD DRIVE AND USB CONNECTIONS; OPEN

14 5.1.4 FRONT PANEL – HARD DRIVE AND USB CONNECTIONS USB OPEN HDD

Page 23 - THE MAIN MENU SETTINGS; Exit; SET; TITLE SET

19 6.1 THE MAIN MENU SETTINGS Enter the MENU screen by pressing the Setup button. Scroll through the 11 options by pressing the UP and DOWN buttons (i.e. ◄ =left, ▲ =up, ▼ =down, or ► =right). To enter a sub-menu, press the Enter button (i.e. QUAD/ENTER) where the highlighted scroll bar is located. ...

Page 24 - Select which channels will have the Pixel Motion

20 (i) ALARM: Selecting [OFF] disables PIR motion detection from triggering any alarm. Selecting [OSD] will allow alarms to be triggered, and the letters “AL” ill appear on the screen of the camera location where the alarm is taking place. A third option, [OSD+BUZZER] will both display “AL” and emit...

Page 28 - ALARM REC SET; SCHEDULE REC SET

24 NOTE After activating the Slave HDD, you need to restart your system by turning the Main Power Switch (located on the back of the monitor) OFF and then ON again in order for the system to recognize the Slave HDD. 9. ALARM REC SET - This sub-menu allows you to configure the Recording parameters un...

Page 29 - “CURRENT LINE DELETE?; selected, the selected schedule is deleted.; The name of the Firmware Upgrade File is “dht_dvr4.bin”. NEVER; again after formatting the USB Memory.

25 this will result in a loss in recorded activity and the schedule may be ignored. To delete a scheduled recording, place the cursor on the selected time and press the ◀ , ▶ key. “CURRENT LINE DELETE? [Y] / [N]” is then displayed. If [Y] is selected, the selected schedule is deleted. 11. FIRMWARE U...

Page 30 - PB SET/REC HDD SET; If you set the HDD SLAVE to “Y” then you can set the Playback HDD

26 7 PB SET/REC HDD SET The DVR allows you to easily find sections of recorded video using the Search feature. Press the SEARCH button to access the “PLAYBACK SEARCH SET” menu. (1) LAST RECORD : Plays the most recent recording. (2) FULL LIST : Shows a listing of all recorded video on the HDD, sorted...

Page 31 - FAST REWIND AND FAST FORWARD; Example; Pressing the PLAY button then pressing the FF/REW button also; MULTIPLEXING FUNCTION IN PLAYBACK; THE MASTER & SLAVE HDD; Once you have connected a Slave HDD, it needs to be activated in the; HDD that you connect to the system must be cleared. When the Master

27 8 PLAYBACK OPTION When the PLAY button is pressed, one of the Playback Search menus will appear. The Playback menu that appears upon pressing PLAY depends on the Search option that was last used. For example, if the last Search option used was a Time Search, then pressing PLAY will bring up the P...

Page 32 - The system automatically exits Pan/Tilt mode after 20 seconds of

28 10 PAN / TILT ZOOM : The DVR is equipped with a built-in Pan/Tilt Zoom feature, which is only available when used in conjunction with a compatible Pan/Tilt Dome camera. The Pan/Tilt Zoom feature supports “Pelco D” protocol, and RS-485 Port. To access and operate the PTZ feature, follow these inst...

Page 33 - 1 REMOTE CONTROL; CCTV SYSTEM

29 11 REMOTE CONTROL Features of the Remote Control. For more details on specific remote control features, refer to the Front Panel features. KEY FUNCTION DESCRIPTION SLEEP Mode On/Off. MENU Brings up the Main Menu. 1 - 4 Allows user to select individual cameras. FRZ 1 Freezes the Channel 1 screen. ...

Page 35 - 4 MONITOR & STANDARD VCR/ INSTALLATION; The maximum distance using cable should not exceed 20 meters

31 14 MONITOR & STANDARD VCR/ INSTALLATION Connect the a VCR and a monitor to the inputs on the rear panel of the system. CONNECTION TO A MONITOR FOR VIEWING You can connect your DVR to a monitor for viewing purposes and for On Screen display set-up. Connect a BNC video cable, RCA audio cable fr...

Page 36 - 5 CONNECT A TYPICAL LOREX MONITOR; BACK OF LOREX OBSERVATION MONITOR

32 15 CONNECT A TYPICAL LOREX MONITOR BACK OF LOREX OBSERVATION MONITOR DXR43000 DVR CONNECTION OF A TYPICAL LOREX OBSERVATION MONITOR TO A DXR43000 NOTE: On Lorex quad monitors the BNC video input channel connectors also support video output. The BNC video input/output on a Lorex quad monitor can b...

Page 37 - 6 NETWORK, ALARM & COMPUTER INSTALLATION

33 16 NETWORK, ALARM & COMPUTER INSTALLATION COMPUTER SENSOR REAR 232 PORT INTERNET

Page 38 - 7 NETWORK IMAGE SIZE & SPEED

34 17 NETWORK IMAGE SIZE & SPEED 720 X 240 360 X 240 IMAGE SIZE IPS IMAGE SIZE IPS LOW 14K ~ 15K 13 ~ 18 08K ~ 09K 25 ~ 30 BASIC 16K ~ 17K 10 ~ 15 10K ~ 11K 23 ~ 28 NORMAL 19K ~ 20K 09 ~ 14 11K ~ 12K 23 ~ 28 HIGH 23K ~ 24K 09 ~ 14 14K ~ 15K 15 ~ 20 BEST 32K ~ 33K 09 ~ 14 19K ~ 20K 10 ~ 15 The de...

Page 41 - 0 INSTALLING THE MASTER HDD; Remove the Cartridge Casing from the DVR; Remove the Cover from the Cartridge Casing

37 20 INSTALLING THE MASTER HDD The compartment located on the front panel of the DVR is the removable Cartridge Casing in which you insert the HDD. The various parts of the Cartridge Casing are labeled for your reference. 1. Remove the Cartridge Casing from the DVR Lift the Handle and pull towards ...

Page 44 - 1 THE NETVIEWER SOFTWARE; RJ-45 PIN CONFIGURATION FOR ETHERNET

40 21 THE NETVIEWER SOFTWARE This section provides instructions for installing and using the NetViewer, which is included with the DXR 43000 series DVR. The minimum requirements for this installation are as follows: • CPU: SPEED SHOULD BE 1.0GHZ or more • RAM: 256 MB RAM or more • Operating System: ...

Page 45 - INSTALLING THE NETVIEWER IN YOUR PC; Figure 1: Startup Screen

41 21.2 INSTALLING THE NETVIEWER IN YOUR PC Follow these steps to install the NetViewer from the supported CD-R. 1. Exit all applications currently running in the selected PC. 2. Insert the supplied software CD in the CD-ROM drive. 3. Locate the Setup icon on your CD and double click on setup icon ....

Page 46 - Figure 3: Destination Folder

42 5. Enter your name and organization and press Next. Figure 3: Destination Folder 6. Enter the desired folder for the installation or press Next. Figure 4: Installation

Page 47 - Figure 5: Installation Complete; NetViewer; Netviewer; MAIN

43 7. Press Install to start installing the program. Figure 5: Installation Complete 8. Press the Finish button to end the installation process. 9. Open the NetViewer icon located on your desktop and click on it. 10. The Netviewer main window will appear on the screen as shown below. 21.2.1 NETVIEWE...

Page 48 - 2 SETUP CAMERA FOR REMOTE VIEWING; NETWORK; CONFIGURATION; PROCEDURE; from the set port number.

44 22 SETUP CAMERA FOR REMOTE VIEWING See the following instructions to setup the camera for remote viewing over the internet: 1. NETWORK CONFIGURATION SETTINGS (Page 44) 2. VIEWING THE CAMERAS (Page 45) 22.1 NETWORK CONFIGURATION SETTINGS PROCEDURE Click on the Setup icon , a small setup window wil...

Page 49 - Figure 6: Remote Camera Views

45 22.2 VIEWING THE CAMERAS PROCEDURE Press the connect icon to start viewing the cameras . If the setup is properly done, the cameras will appear on the screen (see Figure 6,page 45 ). Figure 6: Remote Camera Views NOTE If you are behind a router you need to open 4 ports related to the main port. E...

Page 50 - NETWORK CONFIGURATION; NETVIEWER PANEL DESCRIPTION

46 22.3 NETWORK CONFIGURATION 22.3.1 NETVIEWER PANEL DESCRIPTION 1. Used to “PLAY, STOP, PAUSE, REW and FF” the recordings saved on the HDD of the DVR. When the PLAY button is pressed the most recent recorded data will be played regardless of search data set on the DVR. 2. Select the display mode. A...

Page 51 - Set the Brightness Value.

47 5. Set the Contrast/Bright/Sharpness/Color of each channel. 6. TIME SEARCH. This feature allows you to Search events on your DVR. 7. Used to adjust the PAN/TILT camera. 8. a. Used to print the displayed image. b. Used to capture the displayed image of the NetViewer in a JPEG file format 9. a. Use...

Page 52 - AVI SAVING METHOD; Figure 7: Netviewer Setup Window

48 22.3.2 AVI SAVING METHOD PROCEDURE Start the NETVIEWER application and press the SETUP BUTTON . The SETUP window will come out (see Figure 7). Figure 7: Netviewer Setup Window From the SETUP menu, select the REC menu and the window will appear. The REC menu is used to set the values to save the i...

Page 53 - SETTING; Figure 8: Codec Setting; RECORDING DIRECTORY SETTING

49 22.3.3 CODEC SETTING PROCEDURE Figure 8: Codec Setting 1. Choosing a Codec window displays the currently available Codec on your computer. Choose the Codec you want to use. 2. Select the image size to be saved. 3. Set the IPS value to be saved. For example: You could set a new IPS value to be ¼ t...

Page 54 - RECORDING CHANNEL SETTING; LOCAL REC BUTTON; Recording

50 Note: With the available DVR format, you can only playback with the Local Viewer. AVI format can be played with the Windows Media player or other player. 22.3.6 RECORDING CHANNEL SETTING 1. Select the Channels to be saved. LOCAL REC BUTTON (records to the hard drive of your local computer) 2. Pre...

Page 55 - ADMIN USER ID (OR GUEST) PASSWORD CHANGE; guest

51 22.3.7 ADMIN USER ID (OR GUEST) PASSWORD CHANGE PROCEDURE Click on the Setup icon to open the setup window. Note: you must be connected to the DVR to change the password The change password message window will appear . To change the guest password, repeat the procedure above by pressing the guest...

Page 58 - 3 TECHNICAL SPECIFICATIONS; DVR; RCA Input port; Storage Temperature :

54 23 TECHNICAL SPECIFICATIONS DVR Recording Speed : 60 Fields / Sec. HDD Capacity : 300GB(Max.)/ Drive Recording Video Quality : Low, Basic, Normal, High, Best Recording Mode : Normal recording, Alarm (Alarm, Motion) recording, Schedule recording Playback Mode : Normal play mode, FF/REW Video Displ...

Page 59 - 4 TROUBLE SHOOTING; Recording stopped; SOLUTION; Keypad doesn’t work

55 24 TROUBLE SHOOTING If the system does not function properly, please check the following points. The HDD is full, and overwrite is not enabled Recording stopped SOLUTION PROBLEM Check the jumper PIN connection. Activate the Slave HDD in the Menu option HDD SLAVE. Slave HDD not readable DVR Remove...

Page 60 - 5 CARE AND MAINTENANCE

56 25 CARE AND MAINTENANCE Please follow these instructions to ensure proper care and maintenance of this system Keep your monitor and camera dry. If it gets wet, wipe it dry immediately. Use and store your unit in normal temperature environment. Extreme temperatures can shorten the life of the elec...

Page 61 - It’s all on the web; VISIT

It’s all on the web www.lorexcctv.com Product Information User Manuals Quick Start Guides Specification Sheets Software Upgrades Firmware Upgrades VISIT Strategic Vista International Inc. www.lorexcctv.com