Linear BGUS-D - Manuals

MODEL BGUS/BGUS-D • SG/SG-D OPERATOR INSTALLATION GUIDE -6- BARRIER GATE ARM INSTALLATION FOR MODEL BGUS/BGUS-D 1. Make sure the barrier gate is in the full closed position 2. With someone’s assistance, lift the arm (#2) up to a height even with the barrier gate fl ange. 3. Using the hardware (#3) p...

MODEL BGUS/BGUS-D • SG/SG-D OPERATOR INSTALLATION GUIDE -8- ELECTRICAL CONNECTION AND ADJUSTMENTS All LINEAR gate operators are supplied with a power disconnect switch to turn on and off the power supply available to the operator. Incoming power should be brought into the operator and connected to t...

MODEL BGUS/BGUS-D • SG/SG-D OPERATOR INSTALLATION GUIDE -9- Auto Close Timer Adjustment: This 270-degree adjustable potentiometer will signal the operator to close automatically, from the fully open position, provided no open, reversing or obstruction signals are present. The timer is adjustable fro...

MODEL BGUS/BGUS-D • SG/SG-D OPERATOR INSTALLATION GUIDE -10- TERMINAL CONNECTION DESCRIPTIONS TERMINALS FUNCTION DESCRIPTION OF FUNCTION 24VAC 24VAC Provides 24Volt AC power for accessories. 24VAC N Note: DC models will NOT have 24Volt AC power available. 24VDC+ 24VDC Provides 24Volt DC power for ac...

MODEL BGUS/BGUS-D • SG/SG-D OPERATOR INSTALLATION GUIDE -12- ONBOARD L.E.D. INDICATOR DESCRIPTIONS Control Board L.E.D. Indicators:OPEN This indicator is lit when an open signal is present. This signal can come from such devices as button stations, radio receivers, keypads and telephone entry system...

MODEL BGUS/BGUS-D • SG/SG-D OPERATOR INSTALLATION GUIDE -13- BGUS-D • SG-D CHARGER BOARD SLEEP MODE When primary AC power is not available, the operator will continue to operate in battery only mode if the charger board is set in its RUN mode ( see Battery Backup Charger Con fi guration ). Accessori...

MODEL BGUS/BGUS-D • SG/SG-D OPERATOR INSTALLATION GUIDE -14- CONTROL and ACCESSORY CONNECTION ILLUSTRATIONS

MODEL BGUS/BGUS-D • SG/SG-D OPERATOR INSTALLATION GUIDE -17- TROUBLESHOOTING Operator fails to start: A. If the operator has been running a large number of cycles, the motor may have gotten hot and tripped the overload. Allow the motor to cool down and press the overload reset button in bottom of mo...

MODEL BGUS/BGUS-D • SG/SG-D OPERATOR INSTALLATION GUIDE -18- MODEL BGUS MECHANICAL PARTS EXPLODED VIEW

MODEL BGUS/BGUS-D • SG/SG-D OPERATOR INSTALLATION GUIDE -19- MODEL BGUS MECHANICAL PARTS LIST Ref. PartNo. Number Description 2 2110-781* Welded Cabinet Assembly 3 2100-372* Enclosure Door 5 2220-008 Lock Assembly with Key 6 2110-746 Bearing Block Assembly Kit 7 2110-170 Drive Shaft Assembly 8 2110-...

MODEL BGUS/BGUS-D • SG/SG-D OPERATOR INSTALLATION GUIDE -22- MODEL SG MECHANICAL PARTS EXPLODED VIEW

MODEL BGUS/BGUS-D • SG/SG-D OPERATOR INSTALLATION GUIDE -30- PREVENTATIVE MAINTENANCE GENERAL: LINEAR gate operators are designed for many years of trouble-free operation and, under recommended operating conditions, will require only minimal maintenance. To ensure that your unit is ready for operati...

MODEL BGUS/BGUS-D • SG/SG-D OPERATOR INSTALLATION GUIDE -31- sso 3 Imperial Oil MATERIAL SAFETY DATA SHEET Date Prepared: February 02, 1996 Supersedes: January 07, 1995 MSDS Number: 225570 Cette fi che signaletique ast aussi disponible en francais 1. PRODUCT INFORMATION Product Identi fi er: ESSO GE...