Life fitness SM51 - Manuals

Life fitness SM51 – Manual in PDF format online.

Manuals:

Manual

Manual Life fitness SM51

Summary

Page 2 - SM51 Unpacking & Assembly Instructions; COMPONENTS OF THE SM51 ARE LARGE AND HEAVY. USE CAUTION; MATERIALS AND TOOLS REQUIRED FOR ASSEMBLY; Pinch bar; ASSEMBLY TIME; Two people can accomplish this assembly in approximately 2 hours.

SM51 Unpacking & Assembly Instructions 2 The SM51 comes partially assembled. Follow the steps below to complete the assembly. WARNING: COMPONENTS OF THE SM51 ARE LARGE AND HEAVY. USE CAUTION WHEN ASSEMBLING THIS MACHINE. MATERIALS AND TOOLS REQUIRED FOR ASSEMBLY 1/2”, 3/8”, 5/8” & 9/16”Socke...

Page 3 - UNPACKING; Follow the steps below when unpacking the components of the SM51.; Cut off the shipping wrapper.; These items are shown in Figure 1.

SM51 Unpacking & Assembly Instructions 3 UNPACKING Follow the steps below when unpacking the components of the SM51. 1. Cut off the shipping wrapper. 2. Remove the parts box and shipping boards. 3. Remove the items in the parts box. These items are shown in Figure 1. A. Remove the bolts bag. B. ...

Page 4 - ASSEMBLY; Place the two weight “cells

SM51 Unpacking & Assembly Instructions 4 ASSEMBLY Figure 2 shows an assembled SM51. Figure 2. SM51 main components (seats and cables removed for clarity). 1. 1 stack cell2. 4 stack cell3. Lat bench 4. Connecting beam 5. Lat top 6. Tricep top 7. Low row bench8. 300 lb. W eight stacks (2)9. 190 lb...

Page 5 - Bolt on the teardrop pulleys; above the benches (see Figure 4) on the 4 stack cell

SM51 Unpacking & Assembly Instructions 5 Figure 3. Set the weight stack cells. 2. Bolt on the teardrop pulleys above the benches (see Figure 4) on the 4 stack cell using two 3/8” x 2-3/4” hex head bolts (used to bolt the cross beam to the crossmembers and the adjustable pulley tops to the top be...

Page 6 - Bolt on the connecting beam; HARDWARE

SM51 Unpacking & Assembly Instructions 6 Figure 5. Configuration for 2-3/4” and 3” bolts. 3. Bolt on the connecting beam (part 4 from Figure 2) using a 5/8” socket with extension and combination wrench, to the cells using two of the large 7/16” x 6” bolts,7/16” washers, and 7/16” nuts (parts A, ...

Page 7 - Mount the 56” lat top; Mount the weight stacks to the 4-stack cell.; using a 9/16” socket and combination; Unbolt the top plate and remove the guide rods; using a 9/16” socket and

SM51 Unpacking & Assembly Instructions 7 4. Mount the 56” lat top (part T from HARDWARE section) to the 4-stack cell using a 5/8” socket and combination wrench. Insert two of the large 7/16” by 6” bolts using thehardware configuration shown in Figure 7. Mount the 29” tricep top (part U in HARDWA...

Page 8 - D. Flip over the weight stack; Slide the guide rods (2) through the weight stacks; Flip over the weight stacks.; W hen shipped, the weight stacks have the pull pins; Set the weight stacks onto the machine.; Using a piano dolly, lift the weight

SM51 Unpacking & Assembly Instructions 8 Figure 9. Remove the tricep back rest, the top plate and the guide rods. C. Prepare the weight stack-add bumpers to bottom, insertguide rods, put pull pin inbottom plate of stack. D. Flip over the weight stack onto piano dolly. E. Hoist the weightstack on...

Page 9 - Bolt on the top plate.; W ith the top plate on the guide rods, bolt on the top plate

SM51 Unpacking & Assembly Instructions 9 F. Bolt on the top plate. W ith the top plate on the guide rods, bolt on the top plate to the top of the cells as shown in Figure 11 using a 9/16” socket and combinationwrench and the 3” bolts (with cap washers) that were previously inserted. Figure 11. B...

Page 10 - Mount adjustable pulley brackets.; W hen shipped, the adjustable pulley brackets; Figure 13. Mount adjustable pulley bracket.; Using the bolts specified in; Figure 14. Mount the benches to the frame.

SM51 Unpacking & Assembly Instructions 10 7. Mount adjustable pulley brackets. W hen shipped, the adjustable pulley brackets look like the ones shown in Figure 13. The bolts need to be removed and the bracketneeds to be positioned so that the top of the bracket is in the top hole as shown bythe ...

Page 11 - Figure 15. Bolt the benches to the frame.

SM51 Unpacking & Assembly Instructions 11 Figure 15. Bolt the benches to the frame.

Page 12 - INSTALLING THE CABLES; YOU MUST REMOVE ALL PULLEYS TO ROUTE THE CABLES.

SM51 Unpacking & Assembly Instructions 12 INSTALLING THE CABLES The SM51 uses five cables. There are three different types of cable used on the SM51. Theyare: 1. Adjustable crossover cables (ball end cables) (2). 2. Low row cable (the long cables) (1). 3. Lat pulldown and tricep cables (2). The ...

Page 13 - ADJUSTABLE CROSSOVER CABLE ROUTING; Figure 17. Adjustable crossover cable routing.

SM51 Unpacking & Assembly Instructions 13 ADJUSTABLE CROSSOVER CABLE ROUTING Once you’ve removed the pulleys as described previously, route the adjustable crossovercable on the 4-stack cell as shown in Figure 17. The crossover cable is routed at the factoryon the 1 stack cube (shown at right in ...

Page 14 - Figure 18. Adjustable crossover cable end detail.; LOW ROW CABLE ROUTING; Route the low row cable as shown in Figure 19.

SM51 Unpacking & Assembly Instructions 14 Figure 18. Adjustable crossover cable end detail. Using a 7/8” wrench, tighten the jam nut onto the adjustable pulley threads as shown in Figure18. Place a rubber cap on the top of the cable as shown in Figure 18 (right). LOW ROW CABLE ROUTING Route the ...

Page 15 - Figure 20. Screw the cable into the weight stack.; LAT PULLDOWN CABLE ROUTING

SM51 Unpacking & Assembly Instructions 15 Bolt the cable to the weight stacks as shown in Figure 20. Thread the 7/8” nut up on thecable bolt as shown at left. Screw the bolt down into the weight stack as shown at right.Tighten the bolt with a 7/8” combination wrench. Figure 20. Screw the cable i...

Page 16 - TRICEP PUSHDOWN CABLE ROUTING; Figure 22. Tricep pushdown cable routing.

SM51 Unpacking & Assembly Instructions 16 TRICEP PUSHDOWN CABLE ROUTING Route the tricep pushdown cable as shown in Figure 22. Screw the cable into the weight stackas shown previously in Figure 20. Figure 22. Tricep pushdown cable routing.

Page 18 - beam, lat top beam, and connecting beam to the tops of the cells)

SM51 Unpacking & Assembly Instructions 18 The parts shown in Hardware Figure 1 are used to assemble the SM51. They are: A. 7/16” x 6” hex head bolt (used to bolt the tricep top beam, adjustable crossover top beam, lat top beam, and connecting beam to the tops of the cells) B. 7/16” flat washer C...

Page 21 - Hardware Figure 6. Weight stack rubber bumpers.

SM51 Unpacking & Assembly Instructions 21 Hardware Figure 6. Weight stack rubber bumpers. W . W eight stack rubber bumpers (inserted under weight stacks) (8) Hardware Figure 7. Floating pulleys. X. Floating pulley (bolt to 190 lb weight stack other than tricep pushdown stack) (1)

Page 22 - PARTS LIST; Description; Main components

SM51 Unpacking & Assembly Instructions 22 PARTS LIST Part # ID Description Quantity Main components 123456789 1-stack cell4-stack cellLow row benchConnecting beamLat topTricep topLat bench300 lb weight stack190 lb weight stack 111111123 0017-00042-09360017-00103-02340017-00101-14080017-00101-140...