Life fitness SM51 - Manual
Life fitness SM51 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SM51 Unpacking & Assembly Instructions; COMPONENTS OF THE SM51 ARE LARGE AND HEAVY. USE CAUTION; MATERIALS AND TOOLS REQUIRED FOR ASSEMBLY; Pinch bar; ASSEMBLY TIME; Two people can accomplish this assembly in approximately 2 hours.
- Page 3 – UNPACKING; Follow the steps below when unpacking the components of the SM51.; Cut off the shipping wrapper.; These items are shown in Figure 1.
- Page 4 – ASSEMBLY; Place the two weight “cells
- Page 5 – Bolt on the teardrop pulleys; above the benches (see Figure 4) on the 4 stack cell
- Page 6 – Bolt on the connecting beam; HARDWARE
- Page 7 – Mount the 56” lat top; Mount the weight stacks to the 4-stack cell.; using a 9/16” socket and combination; Unbolt the top plate and remove the guide rods; using a 9/16” socket and
- Page 8 – D. Flip over the weight stack; Slide the guide rods (2) through the weight stacks; Flip over the weight stacks.; W hen shipped, the weight stacks have the pull pins; Set the weight stacks onto the machine.; Using a piano dolly, lift the weight
- Page 9 – Bolt on the top plate.; W ith the top plate on the guide rods, bolt on the top plate
- Page 10 – Mount adjustable pulley brackets.; W hen shipped, the adjustable pulley brackets; Figure 13. Mount adjustable pulley bracket.; Using the bolts specified in; Figure 14. Mount the benches to the frame.
- Page 11 – Figure 15. Bolt the benches to the frame.
- Page 12 – INSTALLING THE CABLES; YOU MUST REMOVE ALL PULLEYS TO ROUTE THE CABLES.
- Page 13 – ADJUSTABLE CROSSOVER CABLE ROUTING; Figure 17. Adjustable crossover cable routing.
- Page 14 – Figure 18. Adjustable crossover cable end detail.; LOW ROW CABLE ROUTING; Route the low row cable as shown in Figure 19.
- Page 15 – Figure 20. Screw the cable into the weight stack.; LAT PULLDOWN CABLE ROUTING
- Page 16 – TRICEP PUSHDOWN CABLE ROUTING; Figure 22. Tricep pushdown cable routing.
- Page 18 – beam, lat top beam, and connecting beam to the tops of the cells)
- Page 21 – Hardware Figure 6. Weight stack rubber bumpers.
- Page 22 – PARTS LIST; Description; Main components
M051-K50-B112
1
5 STACK MULTI-JUNGLE (SM51)
WITH 2 ADJUSTABLE PULLEYS
UNPACKING AND ASSEMBLY INSTRUCTIONS
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
SM51 Unpacking & Assembly Instructions 2 The SM51 comes partially assembled. Follow the steps below to complete the assembly. WARNING: COMPONENTS OF THE SM51 ARE LARGE AND HEAVY. USE CAUTION WHEN ASSEMBLING THIS MACHINE. MATERIALS AND TOOLS REQUIRED FOR ASSEMBLY 1/2”, 3/8”, 5/8” & 9/16”Socke...
SM51 Unpacking & Assembly Instructions 3 UNPACKING Follow the steps below when unpacking the components of the SM51. 1. Cut off the shipping wrapper. 2. Remove the parts box and shipping boards. 3. Remove the items in the parts box. These items are shown in Figure 1. A. Remove the bolts bag. B. ...
SM51 Unpacking & Assembly Instructions 4 ASSEMBLY Figure 2 shows an assembled SM51. Figure 2. SM51 main components (seats and cables removed for clarity). 1. 1 stack cell2. 4 stack cell3. Lat bench 4. Connecting beam 5. Lat top 6. Tricep top 7. Low row bench8. 300 lb. W eight stacks (2)9. 190 lb...
