Life fitness GS2 - Manuals - manualsarea.com

Page 2 - IMPORTANT SAFETY INFORMATION; TABLE OF CONTENTS

THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES ! 1. Before using, read all the warnings and instructionson the use of this machine. Use only for intendedexercise. DO NOT modify the machine. 2. Obtain a medical exam before beginning anyexerc...

Page 3 - BOLT LENGTH RULER:; Bolt Length Ruler; BOLT LENGTH

IMPORTANT NOTES Please note: Tools Required for Assembly * Thank you for purchasing the ParaBody GS1/ GS2 Leg Press Adapter Kit. Please read these instructions thoroughly and keep them for future reference. This product must be assembled on a flat, level surface to assure its proper function. * 9/16...

Page 4 - PARTS LIST; FIGURE 1

PARTS LIST 4 NOTE: The LEG PRESS ATTACHMENT (LP5) must be assembled before connecting it to the PARABODY GS1/GS2 GYM SYSTEMS PART # ACU04-1450 ACU13-0140 ACU06-0024 ACU06-0362 ACUDC1250100020B ACUDB2E03811000B ACUDA1E03813416NB QTY 1 1 7 1 9 14 3 PART # ACUDA1E03823416NB ACUDA1E03840016NB ACUDA1E038...

Page 5 - FIGURE 2

5 0 1 2 3 4 5 6 1/2 1/2 1/2 1/2 1/2 1/2 • If not already installed, slide one 2” COVER CAP (4) over the FRONT LEG (1) as shown in FIGURE 8 FIGURE 2 STEP 2: • SECURELY assemble the FRONT LEG (1) to the GS1/GS2 Gym System using two 3/8 X 4” BOLTS (9), four 3/8” WASHERS (5), two LOW HEIGHT 3/8” LOCK NU...

Page 6 - FIGURE 3

FIGURE 3 STEP 3: • Assemble the new LEG PRESS CABLE (2) using the previously removed bolts as shown in FIGURE 3. (NOTE: Make sure the LEG PRESS CABLE is running in the grooves of all pulleys and above the retaining bolts.) 6 2

Page 7 - FIGURE 4

FIGURE 4 STEP 4: 7 1 6 3 • SECURELY assemble one 3-1/2” PULLEY (3) to the FRONT LEG (1) using one 3/8 X 1-3/4” BOLT (7) and one 3/8” LOCK NUT (6). See FIGURE 4. 2 7 3/8 X 1-3/4” 0 1 2 3 4 5 6 1/2 1/2 1/2 1/2 1/2 1/2

Page 8 - FIGURE 5; FIGURE 6

FIGURE 5 STEP 5: 8 • SECURELY attach the LP5 LEG PRESS to the FRONT LEG (1) using two 3/8” X 2-3/4” BOLTS (8), two 3/8” WASHERS (5), and two 3/8” LOCK NUTS (6). See FIGURE 5. 1 6 5 8 3/8 X 2-3/4” FIGURE 6 STEP 6: • Carefully route the LEG PRESS CABLE (2) around one 3-1/2” PULLEY (3) and SECURELY ass...

Page 9 - FIGURE 8; FIGURE 7

9 0 1 2 3 4 5 6 1/2 1/2 1/2 1/2 1/2 1/2 FIGURE 8 STEP 8: • Carefully route the LEG PRESS CABLE (2) around one 3-1/2” PULLEY (3) and SECURELY assemble the 3-1/2” PULLEY (3) to the bracket on the SEAT FRAME using one 3/8 X 1-3/4” BOLT (7) and one 3/8” LOCK NUT (6) as shown in FIGURE 8. Makesure the CA...

Page 10 - FIGURE 9

FIGURE 9 STEP 9: • Carefully route the LEG PRESS CABLE (2) around one 3-1/2” PULLEY (3) and SECURELY assemble the 3-1/2” PULLEY (3) to the SEAT FRAME using one 3/8 X 4-3/4” BOLT (10), two STEP SPACERS 1-19/32” (12) and one 3/8” LOCK NUT (6) as shown inFIGURE 9. Make sure the CABLE is in the grooves ...

Page 12 - CABLE ROUTING DIAGRAM

FIGURE 13 STEP 13: 3/8 X 4-3/4” 10 2 6 13 SEAT FRAME 12 • SECURELY assemble the swivel end of the LEG PRESS CABLE (2) to the SEAT FRAME using one 3/8 X 4-3/4” BOLT (10), two STEP SPACERS 1-11/16” (13) and one 3/8” LOCK NUT (6). (NOTE: SECURELY tighten, then back nut off 1/4 turn) CABLE ROUTING DIAGR...