Life fitness Club Machine - Manuals

6 STEP 3: FIGURE 3 • Insert the shaft of the HOUSINGS (4) into the ends of the SMITH BAR (7) as shown in FIGURE 3. 7 4 !! IMPORTANT !! REMOVE TAPE FROM BOTH ENDS OF THE HOUSINGS AS SHOWN! DO NOT REMOVE PLASTIC TUBES ON THIS STEP! HOUSING

7 STEP 4: FIGURE 4 • Slide one GUIDE ROD (10) through the upper hole in the UPRIGHT (1 & 16) and proceed to slide one 1” SHAFT COLLAR (6) over the bottom of the GUIDE ROD (10) as shown in FIGURE 4. • Hook the SMITH BAR (7) onto slots of the BAR SUPPORT RACKS (8). 4 6 1 0 1 5 • CAREFULLY lower th...

8 STEP 5: FIGURE 5 • Slide the 1” SHAFT COLLARS (6) up the GUIDE RODS (10) to the bushing of the UPRIGHTS (1 & 16) and SECURELY TIGHTEN. SECURELY TIGHTEN! 1 0 6 1 1 6

9 FIGURE 6 STEP 6: • If necessary, apply the FOREIGN LANGUAGE PLACARD LABEL (17) to the PLACARD LABEL on the RIGHT UPRIGHT (1) as shown in FIGURE 6. 1 7 1 • This equipment is designed to be stable during normal use, however, in order to ensure the saftey of personnel during potential misuse of the e...

Clean: • Upholstery with mild soap and water.• Guide rods with a cotton cloth.• Hand grips with mild soap and water.• Frame damage can be repaired with touch-up paint can be purchased from your LifeFitness customer service representative at (800)351-3737. Inspect: • Cables for wear or damage and pro...