Life fitness Club Machine - Manual

Page 2 - PARTS LIST; Tools Required for Assembly

PARTS LIST PART # 7 1 8 5 1 x x 71124xx 71125xx 7 1 8 5 2 0 1 7 1 8 2 7 0 2 3 2 0 3 0 0 2 7 1 8 5 0 0 1 7 1 7 8 1 0 1 7112601 7 1 0 4 6 0 1 KEY 1 2 3 4 5 6 7 8 9 1 0 QTY 1 1 1 2 2 2 1 2 6 2 KEY 11 1 2 1 3 1 4 1 5 1 6 1 7 1 8 1 9 OR PART # 3102922 3 1 0 2 9 0 4 3 1 0 2 8 0 7 3 1 0 2 5 1 4 6 8 6 6 7 0...

Page 4 - FIGURE 1

4 FIGURE 1 STEP 1: • LOOSELY assemble the two WEIGHT HORNS (9) and the BOTTOM CROSS BRACE (3) to the RIGHT and LEFT UPRIGHTS (1 & 16) as shown in FIGURE 1 using using four BLACK RH CAPS (18), four RH CAPS (19), four 3/8 X 3” BOLTS (12), eight 3/8”SAE WASHERS (14), eight 3/8” RH WASHERS (15) and ...

Page 5 - FIGURE 2

5 FIGURE 2 STEP 2: 0 1 2 3 4 5 6 1/2 1/2 1/2 1/2 1/2 1/2 • SECURELY assemble the four WEIGHT HORNS (9) to the RIGHT and LEFT UPRIGHTS (1 & 16) as shown in FIGURE 2 using using eight BLACK RH CAPS (18), eight RH CAPS (19), eight 3/8 X 2-3/4” BOLTS (11), sixteen 3/8” SAE WASHERS (14),sixteen 3/8” ...

Page 6 - FIGURE 3; REMOVE TAPE FROM BOTH ENDS OF THE

6 STEP 3: FIGURE 3 • Insert the shaft of the HOUSINGS (4) into the ends of the SMITH BAR (7) as shown in FIGURE 3. 7 4 !! IMPORTANT !! REMOVE TAPE FROM BOTH ENDS OF THE HOUSINGS AS SHOWN! DO NOT REMOVE PLASTIC TUBES ON THIS STEP! HOUSING

Page 7 - FIGURE 4

7 STEP 4: FIGURE 4 • Slide one GUIDE ROD (10) through the upper hole in the UPRIGHT (1 & 16) and proceed to slide one 1” SHAFT COLLAR (6) over the bottom of the GUIDE ROD (10) as shown in FIGURE 4. • Hook the SMITH BAR (7) onto slots of the BAR SUPPORT RACKS (8). 4 6 1 0 1 5 • CAREFULLY lower th...

Page 8 - FIGURE 5

8 STEP 5: FIGURE 5 • Slide the 1” SHAFT COLLARS (6) up the GUIDE RODS (10) to the bushing of the UPRIGHTS (1 & 16) and SECURELY TIGHTEN. SECURELY TIGHTEN! 1 0 6 1 1 6

Page 9 - FIGURE 6

9 FIGURE 6 STEP 6: • If necessary, apply the FOREIGN LANGUAGE PLACARD LABEL (17) to the PLACARD LABEL on the RIGHT UPRIGHT (1) as shown in FIGURE 6. 1 7 1 • This equipment is designed to be stable during normal use, however, in order to ensure the saftey of personnel during potential misuse of the e...

Page 10 - PREVENTATIVE MAINTENANCE TIPS; Consult your physician before beginning any exercise program.; WARRANTY INFORMATION

Clean: • Upholstery with mild soap and water.• Guide rods with a cotton cloth.• Hand grips with mild soap and water.• Frame damage can be repaired with touch-up paint can be purchased from your LifeFitness customer service representative at (800)351-3737. Inspect: • Cables for wear or damage and pro...

Life fitness Club Machine - Manual

Table of Contents:

Summary

Other Life fitness Models