Life fitness 8115 - Manuals

STEP 3: FIGURE 3 5 • SECURELY assemble the REAR UPRIGHT (1) to the BENCH FRAME (2) using two 1/2 X 3” BOLTS (13), four 1/2” WASHERS (16), and two 1/2” LOCK NUTS (18) as shown in FIGURE 3. 1/2 X 4” 12 13 1/2 X 3” • SECURELY assemble the BASE TUBE (4) to the BENCH FRAME (2) using two 1/2 X 4” BOLTS (1...

STEP 4: FIGURE 4 6 • Assemble the LEFT & RIGHT BACK PAD ANGLES (5 & 6) and two HINGE TABS (20) to the BENCH FRAME (2) using one 1/2 X 9-1/2” BOLT (10) and one 1/2” LOW HEIGHT LOCK NUT (19). (NOTE: Tighten connection enough to remove play yet allowing the parts to rotate freely.) See FIGURE 4...

7 STEP 5: FIGURE 5 • Assemble the LEFT & RIGHT BACK PAD ANGLES (5 & 6) and two HINGE TABS (20) to the BENCH FRAME (2) using one 1/2 X 9-1/2” BOLT (10) and one 1/2” LOW HEIGHT LOCK NUT (19). (NOTE: Tighten connection enough to remove play yet allowing the parts to rotate freely.) See FIGURE 4...

8 FIGURE 6 STEP 6: 0 1 2 3 4 5 6 1/2 1/2 1/2 1/2 1/2 1/2 • SECURELY assemble the BACK PAD (9) to the LEFT & RIGHT BACK PAD ANGLES (5 & 6) using four 3/8 X 1-1/4” BOLTS (15) and four 3/8” WASHERS (17) as shown in FIGURE 6. 3/8 X 1-1/4” 15 9 5 6 17

STEP 7: 9 FIGURE 7 • SECURELY assemble the SEAT PAD (8) to the HINGE TABS (20) using two 3/8 X 1-1/4” BOLTS (15) and two 3/8” WASHERS (17) as shown in FIGURE 7. 3/8 X 1-1/4” 15 17 8 20 Thank you for purchasing the LifeFitness 8115 FLAT & INCLINE BENCH. If unsure of proper use of equipment, call ...