LG WD1207NCW - Manuals

5 EN • This appliance must not be installed behind a lockable door, a sliding door or a door with a hinge on the opposite side to that of the appliance, in such a way that a full opening of the appliance door is restricted. • This appliance must be grounded. In the event of malfunction or breakdown,...

7 EN • Do not touch the power plug or the appliance controls with wet hands. • Do not bend the power cable excessively or place a heavy object on it. • Do not wash rugs, mats, shoes or pet blankets, or any other items other than clothes or sheets, in this machine. • This appliance must only be used ...

8 EN Disposal of Your Old Appliance • This crossed-out wheeled bin symbol indicates that waste electrical and electronic products (WEEE) should be disposed of separately from the municipal waste stream. • Old electrical products can contain hazardous substances so correct disposal of your old applia...

9 INSTALLATION EN Parts 1 Transit bolts 2 Power plug 3 Drawer 4 Control panel 5 Drum 6 Door 7 Drain hose 8 Drain plug 9 Drain pump filter 10 Cover cap (Location may vary depending on products) 11 Adjustable feet Accessories Cold supply hose (1 EA) (Option: Hot (1 EA)) Spanner Caps for covering trans...

10 EN Specifications Model WD1207NCW WD1475NCW Wash Capacity 7.0 kg 7.5 kg Power Supply 220 - 240 V~, 50 Hz Size 600 mm (W) x 560 mm (D) x 850 mm (H) Product Weight 62 kg Permissible Water pressure 0.1 - 1.0 MPa (1.0 - 10.0 kgf / cm²) • Appearance and specifications may change without notice to impr...

11 EN Installation Place Requirements Location 10 cm 2 cm 2 cm Level floor : Allowable slope under the entire appliance is 1°. Power outlet : Must be within 1 meter of either side of the location of the appliance. • Do not overload the outlet with more than one appliance. Additional Clearance : For ...

12 EN Unpacking and Removing Transit Bolts 1 Lift the appliance off the foam base. • After removing the carton and shipping material, lift the appliance off the foam base. Make sure the tub support comes off with the base and is not stuck to the bottom of the appliance. • If you must lay the applian...

13 EN Using Anti-Slip Sheets (Optional) If you install the appliance on a slippery surface, it may move because of excessive vibration. Incorrect leveling may cause malfunction through noise and vibration. If this occurs, install the anti-slip sheets under the leveling feet and adjust the level. 1 C...

14 EN Leveling the Appliance If the floor is uneven, turn the adjustable feet as required (Do not insert pieces of wood etc. under the feet). Make sure that all four feet are stable and resting on the floor and then check that the appliance is perfectly level (Use a spirit level). • Once the applian...

15 EN Connecting Hose to Water Tap Connecting Screw-Type Hose to Tap with Thread Screw the hose connector onto the water supply tap. Connecting Screw-Type Hose to Tap Without Thread 1 Loose the four fixing screws. Upper connector Rubber seal Fixing screw 2 Remove the guide plate if the tap is too la...

16 EN 3 Push the adapter onto the end of the tap so that the rubber seal forms a watertight connection. Tighten the four fixing screws and the adapter ring plate. 4 Pull the connector latch plate down, push the supply hose onto the adapter, and release the connector latch plate. Make sure the adapte...

17 EN Installing the Drain Hose • The drain hose should not be placed higher than 100 cm above the floor. Water in the appliance may not drain or may drain slowly. • Securing the drain hose correctly will protect the floor from damage due to water leakage. • If the drain hose is too long, do not for...

18 OPERATION EN Using the Washing Machine Before the first wash, select a washing programme, allow the washing machine to wash without clothing. This will remove residue and water from the drum that may have been left during manufacturing. 1 Sort laundry and load items. • Sort laundry by fabric type...

19 EN Sorting Laundry 1 Look for a care label on your clothes. • This will tell you about the fabric content of your garment and how it should be washed. • Symbols on the care labels. Wash temperature Normal machine wash Permanent press Delicate Hand wash Do not wash 2 Sorting laundry. • To get the ...

20 EN Adding Cleaning Products Detergent Dosage • Detergent should be used according to the instruction of the detergent manufacturer and selected according to type, colour, soiling of the fabric and washing temperature. • If too much detergent is used, too many suds can occur and this will result i...

21 EN • Do not leave the fabric softener in the detergent drawer for more than 2 days (Fabric softener may harden). • Softener will automatically be added during the last rinse cycle. • Do not open the drawer when water is being supplied. • Solvents (benzene, etc.) must not be used. NOTE • Do not po...

22 EN Control Panel 1 Power Button • Press the Power button to turn the washing machine on. 2 Start/Pause Button • This Start/Pause button is used to start the wash cycle or pause the wash cycle. • If a temporary stop of the wash cycle is needed, press the Start/Pause button. 3 Display • The display...

23 EN Programme Table Washing Programme Programme Description Fabric Type Proper Temp. Maximum Load Cotton Provides better performance by combining various drum motions. Coloured fast garments (shirts, nightdresses, pajamas, etc.) and normally soiled cotton load (underwear). 40 °C (Cold to 95 °C) Ra...

25 EN Extra Options Programme Time Save Intensive Rinse+ Delay End Crease Care Pre Wash Cotton ● ● ● ● ● ● Cotton Eco ● ● ● ● ● Easy Care ● ● ● ● ● ● Mix ● ● ● ● ● ● Hygiene ● ● ● ● Baby Care ● ● ● ● Silent Wash ● ● ● ● Duvet ● ● ● ● Sports Wear ● ● ● ● Dark Wash ● ● ● ● Quick 30 ● ● ● ● ● Wool Plus...

26 EN Operating Data Programme Max RPM WD1475NCW WD1207NCW Cotton 1400 1200 Cotton Eco 1400 1200 Easy Care 1000 1000 Mix 1400 1200 Hygiene 1400 1200 Baby Care 1000 1000 Silent Wash 1000 1000 Duvet 1000 1000 Sports Wear 800 800 Dark Wash 1400 1200 Quick 30 1400 1200 Wool Plus 800 800 Heavy Stain 1400...

27 EN Option Programme Delay End ( ) You can set a time delay so that the washing machine will start automatically and finish after a specified time interval. 1 Press the Power button. 2 Select a washing programme. 3 Press the Delay End button to set time required. 4 Press the Start/Pause button. NO...

28 EN Time Save ( ) This option can be used to reduce the time of a wash programme. It is best used on lightly s oiled loads. 1 Press the Power button. 2 Select a washing programme. 3 Press the Time Save button. 4 Press the Start/Pause button. Temp. The Temp. button selects the wash and rinse temper...

29 EN Child Lock ( ) Use this option to disable the controls. This feature can prevent children from changing cycles or operating the appliance Locking the Control Panel 1 Press and hold the Child Lock button for 3 seconds. 2 A beeper will sound, and will appear on the display.When the Child Lock is...

30 SMART FUNCTIONS EN Using the Tag On Function Conveniently use the Smart Diagnosis™ to communicate with the appliance directly from a smart phone. • The Tag On function can only be used with most smart phones equipped with the NFC (Near Field Communication) function and based on the Android OS (op...

32 MAINTENANCE EN WARNING • Unplug the washing machine before cleaning to avoid the risk of electric shock. Failure to follow this warning may result in serious injury, fire, electric shock, or death. • Never use harsh chemicals, abrasive cleaners, or solvents to clean the washing machine. They may ...

34 EN Cleaning the Dispenser Drawer Detergent and fabric softener may build up in the dispenser drawer. Remove the drawer and inserts and check for buildup once or twice a month. 1 Remove the detergent dispenser drawer by pulling it straight out until it stops. • Press down hard on the disengage but...

35 EN Caution on Freezing During Winter • When frozen, the product does not operate normally. Make sure to install the product where it will not freeze during winter. • In case the product must be installed outside on a porch or in other outdoor conditions, make sure to check the following. How to K...

36 EN How to Handle Freezing • Make sure to empty the drum, pour warm water of 50–60 °C up to the rubber part inside the drum, close the door, and wait for 1–2 hours. 50-60 °C CAUTION • When the drain hose is installed in a curved shape, the inner hose may freeze. • Open the cover cap and hose plug ...

37 TROUBLESHOOTING EN • Your washing machine is equipped with an automatic error-monitoring system to detect and diagnose problems at an early stage. If your washing machine does not function properly or does not function at all, check the following before you call for service: Diagnosing Problems S...

38 EN Symptoms Reason Solution Water does not enter washing machine or it enters slowly Water supply is not adequate in that location. • Check another tap in the house. Water supply tap is not completely open. • Fully open tap. Water supply hose(s) are kinked. • Straighten hose. The filter of the su...

39 EN Symptoms Reason Solution Door does not open Once washing machine has started, the door cannot be opened for safety reasons. • Check if the ‘Door Lock’ icon is illuminated. You can safely open the door after the ‘Door Lock’ icon turns off. Wash cycle time delayed If an imbalance is detected or ...

40 EN Error Messages Symptoms Reason Solution Water supply is not adequate in area. • Check another tap in the house. Water supply taps are not completely open. • Fully open tap. Water supply hose(s) are kinked. • Straighten hose(s). The filter of the supply hose(s) are clogged. • Check the filter o...

41 EN Symptoms Reason Solution Drain hose is kinked or clogged. • Clean and straighten the drain hose. The drain filter is clogged. • Clean the drain filter. Ensure door is not open. • Close the door completely. If , , is not released, call for service. Control error. • Unplug the power plug and cal...