LG GSA-H42NK - Manuals - manualsarea.com

Page 2 - CAUTION; : The laser used in the Super Multi DVD Rewriter can damage; WARNING; : To reduce the risk of fire or electric shock, do not expose this; Industry Canada requirement; This class B digital apparatus complies with Canadian ICES-003.; FCC COMPLIANCE STATEMENT

i CAUTION : The laser used in the Super Multi DVD Rewriter can damage your eyes. Do not attempt to open the cover. To reduce the risk of electric shock,do not remove the cover (or back). There are no user-serviceable parts inside.Refer servicing to qualified service personnel.Use of controls or perf...

Page 3 - ii

This product is manufactured to comply with the radio interference requirements of EEC DIRECTIVE 89/336/EEC, 93/68/EEC and 73/23/EEC. CAUTION - VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO THE BEAM. VARNING - OSYNLIG LASERSTRÄLNING NÄR DENNA DEL ÄR ÖPPNAD STRÄLEN ÄR FARLIG. CLA...

Page 4 - Contents; other countries by the Microsoft Corporation.

Contents 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Important Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 System Environment . . . . . . . . . . . . . . . . . ....

Page 5 - Supports Region playback control Phase II.; Only drives bearing the logo

Features Important Precautions • Enhanced-IDE (ATAPI) interface. • Power tray loading and ejection of disc. (The disc can also be ejected manually.) • Combination CD-R/RW, DVD-R/RW, DVD-R DL, DVD+R/RW, DVD+R DL, DVD-RAM Drive functions into one drive. • Supports Region playback control Phase II. • S...

Page 6 - System Environment; Computer

3 System Environment Computer This unit can be operated in the system environment explained here. * Compatibility problem in write/read function may occur with media depending on the media manufacturing quality. * For DVD±R 18x support media: Mitsubishi Kagaku Media, That’s, Maxell (MID: MAXELL 003,...

Page 7 - Location and Function of Controls; Software; Digital Audio Output Connector; IDE Interface Connector; Rear Panel; Emergency Eject Hole

4 Location and Function of Controls Software Install the appropriate CD Recording Authoring Software before using this unit. * Please uninstall any previous CD burning software you may have loaded on your PC inorder to prevent possible compatibility issues. Once you have installed the application so...

Page 8 - Installing the Drive; Removing the Computer Cover; Mounting the Drive; NOTE; Jumper Setup; READ

Installing the Drive Before installing the drive, please note the following points. ■ You will need the following:• A screw driver of a suitable size to fit the securing screws for the drive unit.• The manual for the computer, so you can find the mounting positions for the IDE controller cable. ■ Tu...

Page 9 - Only one jumper should be installed on the jumper connector.; PC Connection

NOTE : Only one jumper should be installed on the jumper connector. If more than one jumper is installed, the drive may malfunction or be damaged.Master/Slave setting is determined by jumper installation on the Jumper Connector. The following table shows the possible jumper settings. If you use CSEL...

Page 10 - Beveled edge up; : Improper connection may; keyed and will only fit one way.

To Install as a Slave Drive To install the drive as a Slave, change the jumper setting on the rear panel to SL. Connecting the Power Connector Connect the power cable from the computer’s power supply to the socket on the driveunit, fitting the connector firmly into the power in connector. If there i...

Page 11 - Connecting the Sound Card; Please consult the following internet sites:; Add New Hardware; in Control Panel to let PC search again for new device.; Replacing the Computer Cover; Device Drivers

Connecting the Sound Card If the computer is using a sound card, the drive is connected to the sound card with anaudio cable. The supplied analog audio cable fits most sound cards or one can be purchased at a local computer store. When using Windows 2000 Professional/XP Home Edition/XP Professional,...

Page 12 - How to Use the Discs; Emergency Eject; Don’t use this feature; except; Turn the power to OFF.

How to Use the Discs When using CD-ROM discs, CD-R discs, DVD discs or CD-RW discs, don’t attachany stickers or labels to the discs. It could cause read and write errors, but data onthe disc may be lost due to damage to the disc itself. Emergency Eject This drive has a feature that allows the CD to ...

Page 13 - Troubleshooting; Before Requesting Service; Before calling for service, check this list.

Troubleshooting Before Requesting Service Before calling for service, check this list. • The drive doesn’t have power.• Is the power supply cable from the host computer plugged in?• Is the Power Connector to the drive securely attached? • The system doesn’t start.• Are the Primary and Secondary conn...

Page 14 - Specifications

Specifications 11 The drive’s appearance and specifications may change without prior notice. CD/DVD/CD-RW DVD-ROM(Single/Dual), DVD-RW, DVD-R, DVD-R Dual layer,DVD+RW, DVD+R, DVD+R Double layer, DVD- RAM, CD-Digital Audio & CD-Extra, CD-Plus, CD-ROM, CD-ROM XA-Ready, CD-I FMV, CD-TEXT, CD-Bridge...