Page 2 - Safety Instructions; To reduce the risk of fire or electric shock, do not expose this; FCC COMPLIANCE STATEMENT; - Consult the dealer or an Authorized Service Center for help.
Safety Instructions 11 CAUTION: The laser used in the writer can damage your eyes. Do not attempt to open the cover. To reduce the risk of electric shock, do not remove the cover (or back). There are no user-serviceable parts inside. Refer servicing to qualified service personnel. Use of controls or...
Page 3 - Contents; CLASS 3B VISIBLE AND INVISIBLE LASER RADIATION
2 Contents CAUTION: CLASS 3B VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED.AVOID EXPOSURE TO THE BEAM. CLASS 1 LASER PRODUCT Safety Instructions 1 Introduction 3Using the Drive 4 Drive Connectors 6 Troubleshooting 7 Specifications 9 Information in this document is subject t...
Page 4 - Introduction; Drive Description; • 9.5 mm height internal slim Super Multi DVD Drive.
3 Introduction Drive Description This drive reads and writes to CD and DVD media. This drive has a 9.5 mm slot form factor. Features of the Drive • 9.5 mm height internal slim Super Multi DVD Drive. • CD-R/RW, DVD-R/-R DL/ -RW/ +R/ +R DL/ +RW, DVD-RAM read and write compatible. • CD Family and DVD-R...
Page 5 - Using the Drive; Drive Operation; Front Panel; appearance and specifications may change without prior notice.
4 Using the Drive Drive Operation Front Panel This following is the general figure of the design of the drive. The drive’s appearance and specifications may change without prior notice. 1. Disc slot This is the slot for the disc. Insert a disc on the disc slot, and then lightly push the disc. The di...
Page 6 - Inserting a Disc; cm discs are not supported for Slot load drive.; Removing a Disc; • Keeps the disc unloaded when not using the drive.
5 Inserting a Disc • Insert the disc, label-side up, about quarter-way into the drive slot till a slight resistance is felt. • Gently push the disc further into the drive slot until the drive mechanism is heard to engage and draw in the disc. Release the disc when the disc is pulled in by the mechan...
Page 7 - Cleaning Media; If dust or fingerprints get on the disc, wipe it with a soft cloth; Cleaning the Drive; Cleaning the inside of the drive is not recommended.; Slim SATA Drive Connector; Drive Connectors
6 Cleaning Media If dust or fingerprints get on the disc, wipe it with a soft cloth from the center to the edge. CAUTION: Do not use benzene, paint thinner, record cleaner, solvent, or static repellent. This can damage the disc. Cleaning the Drive Cleaning the inside of the drive is not recommended....
Page 8 - Troubleshooting; Symptoms and Solutions
7 Troubleshooting Please refer to the Introduction section to determine if the drive in your system is a slim device. Symptoms and Solutions Solutions 1-1. Turn off the system, remove the drive, and re-insert back to the system. 2-1. If the disc is dirty (fingerprints, etc.), clean it with a non-abr...
Page 10 - Specifications
9 Specifications System Interface Applicable disc formats PerformanceCD DVD Burst transfer rate Access time (1/3 stroke) Buffer capacityReliability Power supply Temperature Relative Humidity Host Interface DVD CD Disc diameter Read Digital Audio Extraction (DAE) Write CD-R Write CD-RW Read (Single L...