LG CF181D - Manuals - manualsarea.com

Page 2 - Warning

LCOS PROJECTOR LCOS PROJECTOR Warning This is a class B product. In a domestic environment this product may cause radio interference, in which case the user may be required to take adequate measures.

Page 3 - Contents; Names of parts; PICTURE Menu Options; Information

Contents 3 Contents Disposal of your old appliance 1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. 2. All electrical and electronic products should be disposed of separately from the municipal waste stream via...

Page 4 - Safety Instructions; Indoor Installation; Power; WARNING; Indoor Installation; NOTES

Safety Instructions 4 Safety Instructions Please take note of the safety instructions to prevent any potential accident or misuse of the projector. ꔈ Safety Instructions are given in two forms as detailed below. WARNING : The violation of this instruction may cause serious injuries and even death. N...

Page 5 - Using; CAUTION concerning the Power Cord

Safety Instructions 5 Using WARNING If water is spilt into the projector unplug it from the power supply immediately and consult your Service Agent. This may cause an electric shock hazard or damage to the unit! Dispose of used batteries carefully and safely. In the case of a battery being swallowed...

Page 7 - Main Body

Names of parts 7 Names of parts Main Body Front remote control sensor Lens Shift Dial * The projector is manufactured using high-precision technology. You may, however, see on the Projector screen tiny black points and/or bright points (red, blue, or green). This can be a normal result of the manufa...

Page 8 - Connecting Part

Names of parts 8 Connecting Part HDMI IN 1/2 Rear remote control sensor RGB IN COMPONENT IN S-VIDEO Video AC IN Kensington Security System Connector (Refer to page 15) Control Panel USB(SVC Only)

Page 9 - Control Panel; POWER

Names of parts 9 Control Panel POWER Button Turn On/Off the projector. ∧/∨/＜/＞ Button Adjusts functions of menus MENU Button Selects or closes menus. AUTO Button It automatically corrects the position and shaking of the image in RGB mode. INPUT Button Switches to RGB, HDMI, Video, S-Video or Compone...

Page 10 - CAUTION

Names of parts 10 Remote Control Installing Batteries POWER Button INPUT Button MENU Button KEYSTONE Button PATTERN Button GAMMA Button MODE Button ꔉ OK, ∧/∨/＜/＞ Button • Open the battery compartment cover on the back of the remote control.• Insert the specified type of batteries with correct polari...

Page 11 - Projector Status Indicators

Names of parts 11 * Lamp indicator, operation indicator and temperature indicator at the top of the projector show the user the operating status of the projector. Operation IndicatorTemperature Indicator Deco LED (Lens Shift Dial) Lamp Indicator Projector Status Indicators Operation Indicator / Temp...

Page 12 - Accessories

Names of parts 12 * Contact your dealer to purchase these items. * The lamp is consumable and needs to be replaced with a new one when it is burned out. Contact your dealer or service center for a replacement lamp. * Optional parts can be changed without notice to improve the quality of the product,...

Page 13 - Installing and Composition; Installation Precautions; Provide proper ventilation for this projector.

Installing and Composition 13 Installing and Composition Installation Precautions Provide proper ventilation for this projector. Place this projector in adequate temperature and humidity conditions. • Install this projector only in a location where adequate temperature and humidity is available. (Re...

Page 14 - Place the projector on a sturdy and horizontal surface.; Positioning the Projector

Installing and Composition 14 1. Place the projector on a sturdy and horizontal surface. 2. Place the projector the desired distance from the screen. The distance between the projector and the screen determines the actual size of the image. 3. Position the projector so that the lens is set at a righ...

Page 15 - System cable as below.; Kensington Security System

Installing and Composition 15 • This projector has a Kensington Security System Connector on the side panel. Connect the Kensington Security System cable as below. • For the detailed installation and use of the Kensington Security System, refer to the user’s guide included with the Kensington Securi...

Page 16 - Make sure the power cord is connected correctly.; button on the remote control or back cover.; INPUT; button on the back cover or remote control.; Turning on the Projector

Installing and Composition 16 * Do not disconnect the power cord while the fan is in operation. It may shorten the life of the fan. It will also take longer to activate the lamp when turning the power back on. 1. Make sure the power cord is connected correctly. 2. Remove the lens cap. If it is left ...

Page 17 - Selecting an input signal with the; button will only change the projector only to connected; Input List; RGB; Focus and Position of the Screen Image

Installing and Composition 17 Turning the Lens shift dial with excessive power may cause damage to the projector. • Turn the Lens shift dial left or right to adjust the projector image up or down. When an image appears on the screen, check if it is in focus and fits the screen properly. • To adjust ...

Page 18 - Connection; Connect the; RGB IN; of the projector and the computer; Connecting to a Desktop PC

Connection 18 Connection * You can connect the projector to a computer with VGA, SVGA, XGA, SXGA and 1080p/60Hz output. * Refer to page 30 for resolutions the projector supports. < How to connect > Connect the RGB IN of the projector and the computer output port with a computer cable. * You ma...

Page 19 - HDMI IN; of the projector and the HDMI; COMPONENT IN; Connecting to a DVD Player

Connection 19 < How to connect > a. Connect the DVD Player component cable to the Y, P B and P R of the COMPONENT IN of the projector. * When connecting the component cable, match the jack colors with the component cable.(Y=green, P B =blue, P R =red) b. You may use HDMI instead of component i...

Page 20 - Function; MENU; Picture mode

Function 20 Function PICTURE Menu Options * The On-Screen Display (OSD) in this manual may be slightly different from your projector. * This operating guide explains operation of RGB(PC) mode mainly. 1. Press the MENU button. Then, move to PICTURE with the ∧ , ∨ , ＜ , ＞ buttons and press the ꔉ OK bu...

Page 21 - ADV. PICTURE Menu Options; TruMotion on

Function 21 Auto Iris Function TruMotion Demo Function ADV. PICTURE Menu Options 1. Press the A.IRIS button on the remote control. 2. Press the ＜ , ＞ button to adjust the screen condition as you want. * This function adjusts the brightness of the entire image depending on inputted image to provide o...

Page 22 - Advanced Control Function

Function 22 ► Color Temp : Selects the mood of screen colors. • You can also use the C.TEMP button on the remote control. • Color Temp. ꔗ Medium ꔃ ꔗ Cool ꔃ ꔗ ꔃ ꔗ Natural ꔃ ꔗ Warm ꔃ ꔉ OK • TruMotion ꔗ High ꔃ ꔗ Off ꔃ ꔉ OK ꔗ ꔃ ꔗ Low ꔃ ► TruMotion : Makes the moving image smoother through compensation. ...

Page 23 - Advanced Picture Reset Function

Function 23 ► Lamp Mode : Adjusts the lamp brightness. ► Overscan : You can adjust from 90 , 92 , 94 ... 100 . ► Gamma Mode : You can select this mode only when Picture Mode is Cinema/Expert 1/2 . ► White Balance : Adjusts the overall feeling of the screen to your choice. You can select this functio...

Page 24 - SCREEN Menu Options; To Change PJT Mode

24 Function SCREEN Menu Options 1. Press the MENU button. Then, move to SCREEN with the ∧ , ∨ , ＜ , ＞ buttons and press the ꔉ OK button. 2. Move to a sub-item with the ＞ button. Then, use the ∧ , ∨ buttons to move to PJT Mode and press the ꔉ OK button. 3. Move to a desired item with the ∧ , ∨ button...

Page 25 - Using Keystone Function

25 Function 1. Press the KEYSTONE button of remote control. 2. Move to a desired item with the ∧ , ∨ buttons and then press the ＞ but- ton. 3. Press the ∧ , ∨ , ＜ , ＞ button to adjust the screen condition as you want and then press the ꔉ OK button. • Keystone can be adjusted from -100 to 100 . • Exe...

Page 26 - Screen Reset Function

26 Function 1. Press the MENU button. Then, move to SCREEN with the ∧ , ∨ , ＜ , ＞ buttons and press the ꔉ OK button. 2. Move to a sub-item with the ＞ button. Then, use the ∧ , ∨ buttons to move to RGB Config. and press the ꔉ OK button. 3. Move to a desired item with the ∧ , ∨ buttons and then press ...

Page 27 - OPTION Menu Options; Using the Still Function

27 Function 1. Press the STILL button on the remote control. * You can freeze the moving image. 2. To exit STILL, press any button. * The STILL function will release automatically after approximately 10 minutes. <Moving Image> <Still Image> OPTION Menu Options 1. Press the MENU button. T...

Page 28 - Selecting Blank image color

28 Function 1. Press the MENU button. Then, move to OPTION with the ∧ , ∨ , ＜ , ＞ buttons and press the ꔉ OK button. 2. Move to a sub-item with the ＞ button. Then, use the ∧ , ∨ buttons to move to Blank Image and press the ꔉ OK button. 3. Move to a desired item with the ∧ , ∨ buttons and then press ...

Page 29 - INFORMATION Menu Options; Option Reset Function

29 Function 1. Press the MENU button. Then, move to OPTION with the ∧ , ∨ , ＜ , ＞ buttons and press the ꔉ OK button. 2. Move to a sub-item with the ＞ button. Then, use the ∧ , ∨ buttons to move to Auto Sleep and press the ꔉ OK button. 3. Move to On with the ＜ , ＞ buttons and then press the ꔉ OK butt...

Page 30 - Out of Range; Supported Monitor Display

30 Information * The following table lists the display formats supported by the projector. * If the projector does not support the input signal, “ Out of Range ” message appears on the screen. * The projector supports DDC1/2B type as Plug & Play function. (Auto recognition of PC monitor) * The S...

Page 31 - Maintenance

31 Information Cleaning the lens If there is any dust or stain on the surface of the lens, you must always clean the lens. Use an air spray or cleaning cloth for prod- uct exterior, provided with the product, to lightly clean the product. Please use a recommended air spray or lens cleaning product. ...

Page 32 - CHECKING LAMP TIME; To obtain a replacement Lamp unit; Replacing the Lamp

32 Information Lamp Replacement Be careful when replacing lamp The change interval of the lamp depends on the use environment of Projector. You can see the used lamp time in the CHECKING LAMP TIME section of the Menu (page.29). You must replace the lamp when: • The projected image gets darker or sta...

Page 34 - Regarding the projector lamp control

34 Information Regarding the projector lamp control • Don’t turn off the projector at least 5 minutes after activating it. - The frequent On/Off changes may cause the lamp to deteriorate. • Don’t pull out the power cord while operating the projector or the cooling fan. - It will shorten the life of ...

Page 36 - MODEL

The model and serial number of the projector is located on the back or one side of the projector. Record it below should you ever need service. MODEL SERIAL