Leviton LEAPS-120 - Manuals

5 Using Category 5e Patch Cords, cable the LAN ports (labeled 1-8) on the DDC to the Category 5e Voice and Data Module ports that correspond to the wallplate connections where computers or Digital Players will be connected. Port assignments can be marked on the DDC label for reference. NOTE: For net...

6 To ensure the Internet connection is operational click on the SETUP tab in the Network Media Manager application. The log in dialog will open. User name is admin and the password is admin (all lower case). Your user name and password may be reset later via the SYSTEM tab. 3.1 Dynamic IP Addressing...

7 3.3 PPPoE From the Overview screen, click on Network at the top of the page. Under the Internet Connection (WAN) settings section, from the drop-down menu in the Mode line, select Automatic Via PPPoE. 3.2 Static IP Addressing From the Overview screen, click on Network at the top of the page. This ...

Sound Settings NOTE: When audio output is set to 5.1 (S/PDIF/Coax Only), audio will pass through the analog connections when music tracks are played. During movie play- back, if the content is Dolby Digital 5.1, the signal will pass through the digital connections only and no audio will pass through...

STEP FIVE: Harvesting Media There are two ways to configure media on the DDC - one using the Media Manager, the other is a manual transfer of media. This PC-based software application is shipped on the DDC and can be downloaded and installed on up to 10 computers in the home. You must have Windows 20...

6) The DDC Status window opens indicating whether the DDI server is currently available and allows selection of a common or personal destination folder on the DDC. Click Next . 11 DI-000-LEAPS-00A