Leviton LEAPS-DP - Manual
Leviton LEAPS-DP – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – pull the DDC downward into a secure position.
- Page 3 – Figure 1
- Page 4 – Figure 2
- Page 5 – switch to any of the eight DDC LAN ports.; WAN; Remember to snap the cover on to the DDC.; STEP THREE: Configuring the DDC
- Page 6 – Dynamic IP Addressing; technical support department for further information.
- Page 7 – Static IP Addressing; the drop down menu in the Mode line, select
- Page 8 – STEP FOUR: Configuring the DP; NOTE: - Command prompts are displayed at the bottom of the screen.
- Page 9 – STEP FIVE: Harvesting Media; You must have Windows 2000 or XP; Media Manager; Download
- Page 11 – Next
DI-000-LEAPS-00A
Quick-Start Guide
Leviton Entertainment and
Applications Platform
Follow this quick-start guide to install the Leviton Entertainment and Application Platform.
This guide covers the mounting of the Digital Distribution Center (DDC) into a Leviton
Structured Media Center (SMC), and configuring it for normal network operation, digital
media management, and installation of the Digital Player (DP).
Brackets are available for mounting the DDC in an enclosure other than a Leviton SMC,
a 19” rack or wall mounting. Please see your Distributor for information.
PACKAGE CONTENT
- Category 5e cabling system, home run to a common distribution point like a Leviton
Series 420 Structured Media Center
- Leviton Structured Cabling Panel installed at the top of the SMC with at least (1)
Category 5e Voice and Data Board
- Category 5e Patch Cords, up to eight (8)
- Personal computer with web browser installed and Ethernet networking capabilities
(Windows 2000 or XP operating systems only)
- Digital Distribution Center
- Digital Player with Remote for each zone
- Broadband modem, with an ethernet port, and an operational broadband Internet
connection
NOTE:
- Power off all network hardware, including PCs, Digital Players, and Modem
- Composite RCA cable and Category 5e patch cord required for setup of DP
(not included)
- The DDC must be the authorative DNS Server (only router not the network).
PRE-INSTALLATION CHECKLIST
LEAPS-120
LEAPS-DP
Technical Support: 800-824-3005
www.leviton-lin.com
Digital Distribution Center, Includes:
- Power Supply & Power Cords
- Unit Cover
Digital Player, Includes:
- Remote Control
- Power Supply
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Step One: Install Position the DDC in the Structured Media Center. Align gun sites on the DDC with the grid holes on the back of the SMC enclosure. With the mounting pins in the grid holes pull the DDC downward into a secure position. Step Two: Cable Cable the WAN port on the DDC to the Ethernet por...
