Lenovo M82- Manuals

Important safety information CAUTION:Before using this manual, be sure to read and understand all the related safety information for thisproduct. Refer to the information in this section and the safety information in the Safety and Warranty Guide that you received with this product. Reading and unde...

or CRU, do not open the static-protective package containing the part until the instructions direct youto install it. When you handle options or CRUs, or perform any work inside the computer, take the following precautionsto avoid static-electricity damage: • Limit your movement. Movement can cause ...

Plugs and outlets If a receptacle (power outlet) that you intend to use with your computer equipment appears to be damagedor corroded, do not use the outlet until it is replaced by a qualified electrician. Do not bend or modify the plug. If the plug is damaged, contact the manufacturer to obtain a r...

For your safety and to maintain optimum computer performance, always follow these basic precautionswith your desktop computer: • Keep the cover closed whenever the computer is plugged in. • Regularly inspect the outside of the computer for dust accumulation. • Remove dust from vents and any perforat...

Laser compliance statement CAUTION:When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or transmitters) areinstalled, note the following: • Do not remove the covers. Removing the covers of the laser product could result in exposure to hazardous laser radiation. There are no servic...

Chapter 1. Product overview This chapter provides information about the computer features, specifications, software programs providedby Lenovo, and locations of connectors, components, parts on the system board, and internal drives. Features This section provides information about the computer featu...

• PCI Fax modem (installed in some models) System management features • Ability to store power-on self-test (POST) hardware test results • Desktop Management Interface (DMI) Desktop Management Interface provides a common path for users to access information about allaspects of a computer, including ...

Preinstalled software programs Your computer is preinstalled with software programs to help you work more easily and securely. For moreinformation, see “Software overview” on page 5. Preinstalled operating system Your computer is preinstalled with the Microsoft ® Windows ® 7 operating system. Operat...

Specifications This section lists the physical specifications for your computer. Dimensions Width: 175 mm (6.89 inches) Height: 414 mm (16.30 inches) Depth: 442 mm (17.40 inches) Weight Maximum configuration as shipped: 11 kg (24.25 lb) Environment • Air temperature: Operating: 10°C to 35°C (50°F to...

Lenovo ThinkVantage Tools The Lenovo ThinkVantage ® Tools program guides you to a host of information sources and provides easy access to various tools to help you work more easily and securely. To access the Lenovo ThinkVantage Tools program, click Start ➙ All Programs ➙ Lenovo ThinkVantage Tools ....

View Manager The View Manager program enables you to automate window locations. It enhances productivity byproviding the ability to move windows to hot corners and quickly snap them to a predetermined size.It enables you to work across multiple monitors. Lenovo Solution Center The Lenovo Solution Ce...

Locating connectors on the rear of your computer Figure 2 “Rear connector locations” on page 10 shows the locations of the connectors on the rear of yourcomputer. Some connectors on the rear of your computer are color-coded to help you determine where toconnect the cables on your computer. Figure 2....

Locating components Figure 3 “Component locations” on page 12 shows the locations of the various components in yourcomputer. To remove the computer cover, see “Removing the computer cover” on page 34. Figure 3. Component locations 1 Heat sink and fan assembly 9 Secondary hard disk drive bay 2 Memory...

Locating internal drives Internal drives are devices that your computer uses to read and store data. You can add drives to yourcomputer to increase storage capacity and enable your computer to read other types of media. Internaldrives are installed in bays. In this manual, the bays are referred to a...

Machine type and model label The machine type and model label identifies your computer. When you contact Lenovo for help, the machinetype and model information helps support technicians to identify your computer and provide faster service. The following is a sample of the machine type and model labe...

Chapter 2. Using your computer This chapter provides information on using some of the computer components. Frequently asked questions The following are a few tips that will help you optimize the use of your computer. Can I get my user guide in another language? The user guide is available in various...

Note: You can use the mouse or the Up and Down arrow keys to highlight menu selections. You can close the Start menu or the context menu by clicking the mouse or pressing Esc. Using the blue ThinkVantage button Some keyboards have a blue ThinkVantage button that you can use to open a comprehensive o...

– Excessive vibration or sudden shock – An inclined surface – Direct sunlight • Do not insert any object other than a CD or DVD into the drive. • Before moving the computer, remove the CD or DVD from the drive. Handling and storing CD and DVD media CD and DVD media are durable and reliable, but they...

Chapter 3. You and your computer This chapter provides information about accessibility, comfort, and relocating your computer to othercountries or regions. Accessibility and comfort Good ergonomic practice is important to get the most from your personal computer and to avoid discomfort.Arrange your ...

Adjust the monitor so the top of the screen is at, or slightly below, eye level. Place the monitor at acomfortable viewing distance, usually 51 to 61 cm (20 to 24 inches), and position it so you can view itwithout having to twist your body. Also, position other equipment you use regularly, such as t...

Registering your computer When you register your computer, information is entered into a database, which enables Lenovo to contactyou in case of a recall or other severe problem. After you register your computer with Lenovo, you will receivequicker service when you call Lenovo for help. In addition,...

Replacement power cords If you relocate your computer to a country or region that uses an electrical outlet style different from thetype you are currently using, you will have to purchase either electrical plug adapters or new power cords.You can order power cords directly from Lenovo. For power cor...

Chapter 4. Security This chapter provides information about how to protect your computer from theft and unauthorized use. Security features The following security features are available on your computer: • Computrace Agent software embedded in firmware The Computrace Agent software is an IT asset ma...

Locking the computer cover Locking the computer cover helps prevent unauthorized people from gaining access to the inside of yourcomputer. Your computer comes with a padlock loop so that the computer cover cannot be removedwhen a padlock is installed. Figure 8. Installing a padlock 28 ThinkCentre Us...

Attaching a cable lock A cable lock can be used to secure devices, such as the keyboard and the mouse, by locking the devicecables to your computer. The cable lock attaches to the cable lock slots on the rear of your computer. See“Locating connectors on the rear of your computer” on page 10. To inst...

Attaching an integrated cable lock An integrated cable lock, sometimes referred to as the Kensington lock, can be used to secure yourcomputer to a desk, table, or other non-permanent fixture. The cable lock attaches to the integrated cablelock slot at the rear of your computer and is operated with a...

Chapter 5. Installing or replacing hardware This chapter provides instructions on how to install or replace hardware for your computer. Handling static-sensitive devices Do not open the static-protective package containing the new part until the defective part has been removedfrom the computer and y...

Removing the computer cover Attention: Do not open your computer or attempt any repair before reading and understanding the “Important safety information” on page v. This section provides instructions on how to remove the computer cover. CAUTION: Turn off the computer and wait three to five minutes ...

Removing and reinstalling the front bezel Attention: Do not open your computer or attempt any repair before reading and understanding the “Important safety information” on page v. This section provides instructions on how to remove and reinstall the front bezel. To remove and reinstall the front bez...

Figure 14. Removing a PCI card Notes: a. The card fits tightly into the card slot. If necessary, alternate moving each side of the card a small amount until it is removed from the card slot. b. If the card is held in place by a retaining latch, press the card retaining latch 1 as shown to disengage ...

7. Pivot the card latch to the closed position to secure the PCI card. Figure 15. Installing a PCI card What to do next: • To work with another piece of hardware, go to the appropriate section. • To complete the installation or replacement, go to “Completing the parts replacement” on page 86. Instal...

UDIMM DIMM 1 DIMM 2 DIMM 3 DIMM 4 One UDIMM X Two UDIMMs X, 1 X, 2 Three UDIMMs X, 3 X, 1 X, 2 Four UDIMMs X, 3 X, 1 X, 4 X, 2 To install or replace a memory module, do the following: 1. Turn off the computer and disconnect all power cords from electrical outlets. 2. Remove the computer cover. See “...

• If you are installing a memory module, open the retaining clips of the memory slot into which you want to install the memory module. Figure 17. Opening the retaining clips 7. Position the new memory module over the memory slot. Ensure that the notch 1 on the memory module aligns correctly with the...

6. Slide the new optical drive into the drive bay from the front of the computer until the optical drive snaps into position. Figure 21. Installing the optical drive 7. Connect the signal cable and the power cable to the new optical drive. Figure 22. Connecting the optical drive 8. Reinstall the fro...

This section provides instructions on how to install or replace the card reader. Note: The card reader is only available in some models. For new installation, see “Installing the card reader” on page 43. For replacement, see “Replacing the card reader” on page 45. Installing the card reader To insta...

What to do next: • To work with another piece of hardware, go to the appropriate section. • To complete the installation or replacement, go to “Completing the parts replacement” on page 86. Replacing the card reader To replace the card reader, do the following: 1. Remove all media from the drives an...

8. Slide the new card reader into the drive bay until it snaps into position. Figure 29. Installing the card reader 9. Reconnect the card reader cable to Front USB connector 2 on the system board. See “Locating parts on the system board” on page 12. 10. Reinstall the front bezel. See “Removing and r...

4. Remove the old battery. Figure 30. Removing the old battery 5. Install a new battery. Figure 31. Installing a new battery 6. Reinstall the computer cover and connect the cables. See “Completing the parts replacement” on page 86. Note: When the computer is turned on for the first time after replac...

Hazardous moving parts. Keep fingers and other body parts away. CAUTION:Never remove the cover on a power supply or any part that has the following label attached. Hazardous voltage, current, and energy levels are present inside any component that has this labelattached. There are no serviceable par...

5. Lay the computer on its side and remove the four screws at the rear of the chassis that secure the power supply assembly. Figure 32. Removing the screws for the power supply assembly 6. Slide the power supply assembly to the front of the computer and then lift it out of the chassis. 7. Ensure tha...

b. Partially tighten screw 3 , then fully tighten screw 4 , and then fully tighten screw 3 . 10. Connect the heat sink and fan assembly cable to the microprocessor fan connector on the system board. See “Locating parts on the system board” on page 12. What to do next: • To work with another piece of...

b. Note the orientation of the microprocessor in the socket. You can either look for the small triangle 1 on one corner of the microprocessor or note the orientation of the notches 2 on the microprocessor. This is important when installing the new microprocessor on the system board. c. Touch only th...

What to do next: • To work with another piece of hardware, go to the appropriate section. • To complete the replacement, go to “Completing the parts replacement” on page 86. Installing the solid state drive Attention: Do not open your computer or attempt any repair before reading and understanding t...

2. To install the solid state drive with the storage converter into the 3.5-inch hard disk drive bracket, flex the bracket and align pin 1 , pin 2 , pin 3 , and pin 4 on the bracket with the corresponding holes in the storage converter. Figure 38. Installing the solid state drive with the storage co...

1. Insert the mSATA solid state drive into the mini PCI Express slot on the storage converter, and then press the mSATA solid state drive downward. Figure 39. Installing the mSATA solid state drive into the storage converter 2. Install the two screws to secure the mSATA solid state drive to the stor...

3. Slide the mSATA solid state drive storage converter into the card reader drive bay until it snaps into position. Figure 41. Installing the mSATA solid state drive 4. Connect the signal cable and the power cable to the mSATA solid state drive. What to do next: • To work with another piece of hardw...

Replacing the primary hard disk drive Attention: Do not open your computer or attempt any repair before reading and understanding the “Important safety information” on page v. This section provides instructions on how to replace the primary hard disk drive. Note: Depending on your model type, your c...

Replacing the secondary hard disk drive Attention: Do not open your computer or attempt any repair before reading and understanding the “Important safety information” on page v. Note: Your computer comes with a secondary hard disk drive bay for installing or replacing a secondary 3.5-inch hard disk ...

Replacing the front fan assembly Attention: Do not open your computer or attempt any repair before reading and understanding the “Important safety information” on page v. This section provides instructions on how to replace the front fan assembly. Note: The front fan assembly is only available in so...

7. Pull the tips of the rubber mounts until the front fan assembly is secured in place. Figure 55. Installing the front fan assembly 8. Connect the front fan assembly cable to the power fan connector on the system board. 9. Reinstall the front bezel. See “Removing and reinstalling the front bezel” o...

5. The rear fan assembly is attached to the chassis by four rubber mounts. Remove the rear fan assembly by breaking or cutting the rubber mounts and gently pulling the rear fan assembly out of the chassis. Note: The new rear fan assembly will have four new rubber mounts attached. Figure 56. Removing...

7. Pull the tips of the rubber mounts until the rear fan assembly is secured in place. Figure 57. Installing the rear fan assembly 8. Connect the rear fan assembly cable to the system fan connector on the system board. What to do next: • To work with another piece of hardware, go to the appropriate ...

5. Disconnect the front audio and USB assembly cables from the system board. See “Locating parts on the system board” on page 12. Note: Ensure that you note the locations of the cables when you disconnect the cables from the system board. 6. Remove the screw that secures the front audio and USB asse...

6. Position the new internal speaker into the four metal clips 1 and push the internal speaker toward the left until it is secured in place. Figure 60. Installing a new internal speaker 7. Connect the internal speaker cable to the system board. See “Locating parts on the system board” on page 12. Wh...

6. From inside the chassis, pivot the upper retaining clip 1 that secures the plastic holder of the thermal sensor downward and then push the clip outward to release the clip. Then disengage the plasticholder holding the thermal sensor from the chassis. Figure 61. Removing the thermal sensor 7. Pull...

8. Insert the connector and cable of the new thermal sensor into the lower hole 1 in the chassis. Then align the two tabs on the plastic holder holding the thermal sensor with the two holes 1 and 2 in the chassis, and push the plastic holder until it snaps into position. Figure 62. Installing the ne...

7. Position the new cover presence switch so that the screw hole in the cover presence switch is aligned with the corresponding hole in the chassis. Then install the screw to secure the cover presenceswitch to the chassis. Figure 64. Installing the new cover presence switch 8. Reconnect the cover pr...

1. Turn off the computer and disconnect all power cords from electrical outlets. 2. Remove the computer cover. See “Removing the computer cover” on page 34. 3. If your computer comes with a WiFi card module that supports the Bluetooth function, disconnect the Bluetooth cable from the WiFi adapter ca...

5. Grasp the WiFi adapter card that is currently installed and gently pull it out of the slot. Figure 67. Removing the WiFi adapter card Note: The card fits tightly into the card slot. If necessary, alternate moving each side of the card a small amount until it is removed from the card slot. Removin...

2. Remove the two screws that secure the WiFi card module to the WiFi adapter card. Figure 69. Removing the screws that secure the WiFi card module 3. Pull the WiFi card module out of the mini PCI Express slot to remove it from the WiFi adapter card. Figure 70. Removing the WiFi card module Installi...

1. Insert the WiFi card module into the mini PCI Express slot, and then install the two screws to secure the WiFi card module to the WiFi adapter card. Figure 71. Installing the WiFi card module 80 ThinkCentre User Guide

2. Connect the front antenna cable and rear antenna cable to the WiFi card module. Figure 72. Installing the WiFi antenna cables 3. Install the WiFi adapter card into the PCI Express x1 slot on the system board. See “Locating parts on the system board” on page 12. 4. If the installed WiFi card modul...

What to do next: • To work with another piece of hardware, go to the appropriate section. • To complete the installation or replacement, go to “Completing the parts replacement” on page 86. Installing or removing the rear WiFi antenna Attention: Do not open your computer or attempt any repair before...

2. Straighten the rear WiFi antenna so that it can be more easily twisted. 3. Hold the thicker end of the rear WiFi antenna and unscrew the WiFi antenna from the rear of the computer. 3 4 5 6 7 8 Figure 75. Removing the rear WiFi antenna What to do next: • To work with another piece of hardware, go ...

Figure 76. Peeling off the paper that protects the sticker 5. Stick the front antenna to the front panel as shown. Then insert the front antenna cable through the hole in the front panel. Figure 77. Installing the front WiFi antenna 6. Connect the front antenna cable to the WiFi card module. 84 Thin...

What to do next: • To work with another piece of hardware, go to the appropriate section. • To complete the installation or replacement, go to “Completing the parts replacement” on page 86. Removing the front WiFi antenna To remove the front WiFi antenna, do the following: 1. Turn off the computer a...

3. Disconnect the old keyboard cable or mouse cable from the computer. 4. Connect a new keyboard or mouse to one of the USB connectors on the computer. Depending on where you want to connect the new keyboard or mouse, see “Locating connectors, controls, and indicators onthe front of your computer” o...

4. Position the computer cover on the chassis so that the rail guides on the bottom of the computer cover engage the rails on the chassis. Then, push the cover to the front of the computer until it snapsinto position. Figure 80. Reinstalling the computer cover 5. Install the screws to secure the com...

Chapter 6. Recovery information This chapter provides information about the recovery solutions provided by Lenovo. This chapter contains the following topics: • Creating and using recovery media • Performing backup and recovery operations • Using the Rescue and Recovery workspace • Creating and usin...

3. In the Please select boot device window, select the USB hard disk drive as the first boot device and press Enter. The rescue medium starts. When the rescue medium starts, the Rescue and Recovery workspace opens. The help information foreach feature is available from the Rescue and Recovery worksp...

Reinstalling software programs If a software program you installed on your computer is not working correctly, you might need to removeand reinstall it. Reinstalling overwrites the existing programs files and usually fixes any problems thatyou might have had with that program. To remove a program in ...

Chapter 7. Using the Setup Utility program The Setup Utility program is used to view and change the configuration settings of your computer, regardlessof which operating system you are using. However, the operating system settings might override any similarsettings in the Setup Utility program. Star...

2. From the Setup Utility program main menu, select Power . 3. Select Intelligent Cooling Engine (ICE) . The Intelligent Cooling Engine (ICE) window is displayed. 4. Select ICE Thermal Alert . The ICE Thermal Alert window is displayed. 5. Select Enabled or Disabled as desired. 6. Press F10 to save c...

Chapter 8. Updating system programs This chapter provides information about updating the POST and BIOS, and how to recover from a POSTand BIOS update failure. Using system programs System programs are the basic layer of software built into your computer. System programs include thePOST, the BIOS, an...

Chapter 9. Preventing problems This chapter provides information that can help you avoid common problems and keep your computerrunning smoothly. Keeping your computer current In some situations you may find it necessary to have the most current software programs, device drivers, oroperating system. ...

Using System Update The System Update program helps you keep the software on your computer up-to-date. Update packagesare stored on Lenovo servers and can be downloaded from the Lenovo Support Web site. Update packagescan contain applications, device drivers, BIOS flashes, or software updates. When ...

Cleaning your computer It is a good practice to clean your computer periodically to protect the surfaces and ensure trouble-freeoperation. CAUTION:Be sure to turn off the computer and monitor power switches before cleaning the computer andmonitor screen. Computer Use only mild cleaning solutions and...

Many computer supply stores carry the special cleaning fluids for displays. Use cleaning fluids developed forLCD displays only. First apply the fluid to a lint-free, soft cloth, then clean the LCD display. Some computersupply stores carry pre-moistened towelettes for LCD maintenance. Cleaning a glas...

Chapter 10. Troubleshooting and diagnostics This chapter provides information about diagnosing and troubleshooting computer problems. If yourcomputer problem is not described here, see Chapter 11 “Getting information, help, and service” on page127 for additional troubleshooting resources. Basic trou...

Symptom Action The operating system does notstart. Verify that: • The startup sequence includes the device where the operating system resides. Usually, the operating system is on the hard disk drive. For more information,see “Selecting a startup device” on page 100. The computer beeps multipletimes ...

Select the problem your computer is experiencing from the following list: • “Audio problems” on page 111 • “CD problems” on page 112 • “DVD problems” on page 113 • “Intermittent problems” on page 115 • “Keyboard, mouse, or pointing device problems” on page 115 • “Monitor problems” on page 116 • “Net...

• Verify that the audio device drivers are correctly installed. See Microsoft Windows help system for more information. If these actions do not correct the problem, run the Lenovo Solution Center program. If you need technicalassistance, see Chapter 11 “Getting information, help, and service” on pag...

• If you have multiple CD or DVD drives installed (or a combination of CD and DVD drives), try inserting the disc into the other drive. In some cases, only one of the drives is connected to the audio subsystem. • If you are using the Windows 7 operating system, follow the action for “A CD or DVD doe...

Intermittent problems Symptom: A problem occurs only occasionally and is difficult to repeat. Actions: • Verify that all cables and cords are securely connected to the computer and attached devices. • Verify that when the computer is on, the fan grill is not blocked (there is air flow around the gri...

mouse, serial, or USB connector. Some keyboards have integrated USB connectors that can be usedfor a USB mouse or pointing device. • Verify that the device drivers for the mouse or pointing device are installed correctly. • If you are using a USB keyboard or mouse, verify that the USB connectors are...

2. Adjust the placement of the monitor and other devices so that they are at least 305 mm (12 inches) apart. 3. Turn on the monitor. • You can reset the refresh rate through your operating system Control Panel: On the Windows 7 operating system, click Start ➙ Control Panel ➙ Hardware and Sound ➙ Adj...

PIM items sent from the Windows 7 operating system cannot be received correctly Symptom: Personal Information Manager (PIM) items sent from the Windows 7 operating system cannot bereceived correctly into the address book of any other Bluetooth-enabled device. Action: The Windows 7 operating system s...

Performance and lockup problems Poor performance and lockup problems can be a result of any of the following: • “Insufficient free hard disk drive space” on page 122 • “Excessive number of fragmented files” on page 122 • “Insufficient memory” on page 123 Make a selection from the above list to find ...

Action: Run the Windows Disk Defragmenter program. Note: Depending on the size of the hard disk drive and amount of data currently stored on the hard disk drive, the disk defragmentation process might take up to several hours to complete. On the Windows 7 operating system, do the following: 1. Close...

• Ensure the serial cable is securely connected to the serial port on the computer and to the serial device. If the serial device has its own power cord, ensure that it is attached to a properly grounded electrical outlet. • If the serial device has its own On/Off switch, ensure that it is in the On...

• If the software program used to work correctly, but does not work correctly now, click Start ➙ Control Panel ➙ System and Security ➙ System ➙ System Protection ➙ System Restore . • If you are unable to resolve the problem through other methods, uninstall the software program and reinstall it. If t...

Chapter 11. Getting information, help, and service This chapter contains information about help, service, and technical assistance for products manufacturedby Lenovo. Information resources You can use the information in this section to access useful resources relating to your computing needs. Lenovo...

• Access troubleshooting and support information for your computer model and other supported products. • Find the service and support phone numbers for your country or region. • Find a Service Provider located near you. Lenovo Support Web site Technical support information is available on the Lenovo...

• Replacement or use of parts not manufactured for or by Lenovo or non-warranted Lenovo parts• Identification of software problem sources• Configuration of BIOS as part of an installation or upgrade• Changes, modifications, or upgrades to device drivers• Installation and maintenance of network opera...

Trademarks The following terms are trademarks of Lenovo in the United States, other countries, or both: LenovoThe Lenovo logoRescue and RecoveryThinkCentreThinkVantage Microsoft, Windows, and Windows Vista are trademarks of the Microsoft group of companies. Intel, Intel Core, Celeron, and Pentium ar...

Appendix B. Regulatory information Export classification notice This product is subject to the United States Export Administration Regulations (EAR) and has an ExportClassification Control Number (ECCN) of 4A994.b. It can be re-exported except to any of the embargoedcountries in the EAR E1 country l...

Japanese VCCI Class B statement Japan compliance statement for products which connect to the power mains with rated currentless than or equal to 20 A per phase Lenovo product service information for Taiwan Keyboard and mouse compliance statement for Taiwan Additional regulatory information For addit...

Appendix C. WEEE and recycling information Important information for the European Directive 2002/96/EC EU Only The Waste Electrical and Electronic Equipment (WEEE) mark applies only to countries within the EuropeanUnion (EU) and Norway. Appliances are labeled in accordance with European Directive 20...

If you are a company employee and need to dispose of a Lenovo computer or monitor that is the propertyof the company, you must do so in accordance with the Law for Promotion of Effective Utilization ofResources. Computers and monitors are categorized as industrial waste and should be properly dispos...

Battery recycling information for the European Union Notice: This mark applies only to countries within the European Union (EU). Batteries or packaging for batteries are labeled in accordance with European Directive 2006/66/ECconcerning batteries and accumulators and waste batteries and accumulators...

Appendix D. Ek Bilgiler 1. İmalatçı ya da ithalatçı firmaya ilişkin bilgiler: Ürünün ithalatçı firması, Lenovo Technology B.V. Merkezi Hollanda Türkiye İstanbul Şubesi’dir. Adresi vetelefonu şöyledir: Uner Plaza Eski Üsküdar YoluErkut Sokak. No: 4 / 1 Kat: 3KozyatağıKadıkoy, İSTANBUL, TürkiyeTel: 90...

Appendix E. Servis istasyonlari Garanti süresi içerisinde müşteri arızalı ürünü aşağıda belirtilen merkezlere teslim ederek garanti hizmetindenyararlanır. Ürün yerinde garanti hizmeti içeriyorsa, bu merkezlerden birine telefon edebilirsiniz. Garanti Hizmetinin Alınabileceği Merkezler ADANA BSD Bilgi...

Novatek Bilgisayar Sistemleri San.ve Tic.Ltd. Şti.Adresi: Raşit Rıza Sokak, Yıldırım İş Hanı, No: 1 Kat: 1Mecidiyeköy İstanbulPosta Kodu: 80300Web Adresi: http://www.novateknoloji.com/Telefon: 212 356 75 77Faks no: 212 356 75 88 Peritus Bilgisayar Sist. Dış Tic.San.Ltd. Şti.Adresi: Ziverbey Eğitim M...

Index A a rescue medium, creating and using 92 Administrator, password 98 antivirus software 8 audio line-in connector 10 audio line-out connector 10 audio subsystem 1 B backup and recovery operations 90 basic troubleshooting 109 battery, replacing 46 boot-block recovery 104 C cable lock, security 2...