Lennox 506033-34 - Manuals

Lennox 506033-34 – Manual in PDF format online.

Manuals:

Manual Lennox 506033-34

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6

Summary

Page 2 - Figure 2; WOODSTOVES WITh PEDESTAL BASE; Leg based units, see instructions on; INSTALLATION INSTRUCTIONS; Install Blower Assembly; Figure 3; Back View of Pedestal

2 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE. Figure 2 WOODSTOVES WITh PEDESTAL BASE Leg based units, see instructions on Page 4 . Step . From rear of stove, using a 9/16” wrench or socket, loosen both left and right pedestal mounting bolts but do not fully remove the bolts from threaded ho...

Page 3 - Step 5. With the snap switch bracket in place, using a 9/16” wrench or; Step 6. Locate the 3/8” diameter x 1/2” long bolt on the bottom of the; Figure 8; Step 7. Locate front slot on the Control Box as shown in; Figure 7

3 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE. Step 5. With the snap switch bracket in place, using a 9/16” wrench or socket wrench you can now tighten down both left and right side pedestal bolts. See Figure 7 . Step 6. Locate the 3/8” diameter x 1/2” long bolt on the bottom of the firebox ...

Page 4 - Figures; Step 2. Plug the power cord into a grounded 120 VAC receptacle. Do

4 WOODSTOVES WITh LEG BASE Step . Using a 9/16” wrench or socket loosen the left heat shield bolt. This bolt is located on the bottom side of the leg heatshield as shown. See Figure 14 . Figure 14 Step 2. Insert snap switch bracket between the heatshield and the bottom of firebox making sure entire ...

Lennox Manuals