La Crosse Technology WS-9049 - Manuals

Page 2 - WHEN ONE TRANSMITTER IS USED

5  Displays Weekday with Date  Alarm with snooze function  Displays 12 Moon phases throughout the year  Weather forecasting with weather tendency indicator  Indoor comfort indicator  Temperature display in °F/°C  Indoor & outdoor temp w\ MIN/MAX and time of measurement  Humidity data dis...

Page 3 - Positioning” and “915 MHz; the

9 after 60 seconds, remove the batteries from both units and wait for at least 60 seconds before reinserting them. 4. The outdoor temperature and humidity data from the first transmitter (channel 1) and the signal reception icon should be displayed on the Weather Station. If this does not happen aft...

Page 4 - RESET; “Setting Up”; ABOUT WWVB RADIO CONTROLLED TIME; IN key; SET key

13 2. Insert batteries observing the correct polarity (see marking). 3. Replace compartment cover. BATTERY CHANGE: It is recommended to replace the batteries in all units on an annual basis to ensure optimum accuracy of these units. Please participate in the preservation of the environment. Return u...

Page 5 - LCD SCREEN

17  Stop the alarm during alarm ringing  Stop snooze mode ALM/DATE key  Press and hold key for 3 seconds to enter the alarm set mode  Activate/de-activate the alarm time  Silence the alarm  Cancel snooze mode  Display date IN key  Press to toggle between MAX/MIN and current indoor temperatur...

Page 6 - LCD CONTRAST SETTING:; Time Zone setting; MANUAL TIME SETTING:

21 Note: SET mode is entered by pressing and holding the SET key for 3 seconds. If you do not press any keys for 15 seconds while in SET mode, the Weather Station switches out of SET mode. LCD CONTRAST SETTING: The LCD contrast has 8 levels, from 0 to 7 (Default setting is 4): 1. Press and hold the ...

Page 7 - Year; Note; Relative air pressure; RELATIVE AIR PRESSURE VALUE SETTING; Flashing

25 1. The hour digit will start flashing. 2. Use the OUT/+ key to set the hour. 3. Press again the SET key to set the minutes. The minute digits start flashing. 4. Use the OUT/+ key to set the minutes. 5. Confirm with the SET key and enter the Calendar setting. Note: If the WWVB reception function i...

Page 8 - WEATHER FORECASTING ICON SENSITIVITY SETTING:; The current sensitivity value will start flashing.; Manual settings; TO EXIT THE MANUAL SETTING MODE; Use the IN key to set the alarm hour.; Alarm setting; Alarm icon; If the calendar is displayed in the Weather station, the alarm is; SNOOZE SETTING AND STOPPING THE ALARM:; New Moon Small

29 3. Confirm with the SET key and enter the Weather forecast icon sensitivity setting. WEATHER FORECASTING ICON SENSITIVITY SETTING: For locations with rapid changes of weather conditions, the weather icons sensitivity can be set to a different level for faster display of weather conditions. 1. The...

Page 9 - INDOOR RELATIVE HUMIDITY AND INDOOR TEMPERATURE:; Comfortable; Indoor; WEATHER FORECAST AND WEATHER TENDENCY:; Sunny Cloudy with sunny intervals Rainy

33 INDOOR RELATIVE HUMIDITY AND INDOOR TEMPERATURE: The indoor temperature and humidity data and the indoor comfort indicator are automatically updated and displayed on the second section of the LCD. THE COMFORT LEVEL INDICATOR: Comfortable : A happy face icon “  ” indicates a temperature between 6...

Page 10 - WEATHER TENDENCY INDICATOR; Air pressure over the last 24 hours; For accurate barometric pressure trends, the Weather Station; OUTDOOR TEMPERATURE AND HUMIDITY DATA; Outdoor; TOGGLING AND RESETTING THE OUTDOOR DATA; The MIN or MAX data needs to be reset individually.

37 location as being a possible change in air-pressure when really it is due to the slight change of altitude. WEATHER TENDENCY INDICATOR Working together with the weather icons are the weather tendency indicators (located on the left and right sides of the weather icons). When the indicator points ...

Page 11 - LOW BATTERY INDICATOR; When the 915MHz signal is received correctly, do not re-open the; transmission problems may occur.; “Setting up”; POSITIONING THE THERMO/HYGRO TRANSMITTER:; FOLDOUT TABLE STANDS:

41 - Once to show transmitter 2 - Twice to show transmitter 3 - Three times to return to transmitter 1 2. Use OUT/+ key to view the MIN/MAX temperature and humidity data for the selected transmitter. 3. To reset the minimum and maximum temperature and humidity data, and the times at which they were ...

Page 12 - CARE AND MAINTENANCE:; Interior data checking intervals; WARRANTY

45 TO WALL MOUNT: 1. Secure the bracket onto a desired wall using the screws and plastic anchors. 2. Clip the remote temperature transmitter onto the bracket. Note: The mounting surface can affect the transmission range. If, for instance, the unit is attached to a piece of metal, it may then either ...