La Crosse Technology WS-8300U - Manuals

Page 2 - TABLE OF CONTENTS; Introduction..................................................................................................3

2 TABLE OF CONTENTS Introduction……………………………………………………………………………………..3 Inventory of Contents…………………………………………………………………………4 Quick Set Up……………………………………………………………………………………4 Detailed Set Up………………………………………………………………………………4-5 Battery Installation …………..………………………………………………………..4-5 12 or 24 Hour Time Display ……….....

Page 3 - FIGURE 1; This product offers:

3 FIGURE 1 INSTANT TRANSMISSION is the state-of-the-art new wireless transmission technology, exclusively designed and developed by LA CROSSE TECHNOLOGY. INSTANT TRANSMISSION offers you an immediate update (every 4 seconds!) of all your outdoor data measured from the sensors: follow your climatic va...

Page 4 - first; and; FIGURE 2

4 INVENTORY OF CONTENTS 1. Wireless Weather Station (Figure 1) 2. Wireless Thermo-Hygro Sensor (TX21U) and mounting bracket. (Figure 2) 3. 3 each, 1/2” Philips screws. 4. One strip of double sided adhesive tape. 5. Instruction Manual and Warranty Card. ADDITIONAL EQUIPMENT (not included) 1. 1 Philip...

Page 5 - Example; DETAILED SET UP GUIDE; sensor; Temperature Station (see “; B. Wireless Weather station

5 temperatures after the 15 minutes, please retry the set up as stated above. After both indoor and outdoor temperatures are displayed for 15 minutes you can place your thermo-hygro sensor outdoors, and set your time. The remote temperature sensor should be placed in a dry, shaded area. The remote t...

Page 8 - D. VIEWING AND OPERATING WITH MULTIPLE REMOTE SENSOR UNITS

8 displayed. If they are not shown in LCD after 60 seconds, remove the batteries and wait for at least 60 seconds before reinserting them. 4. The outdoor temperature and humidity from the first sensor (channel 1) should then be displayed on the Weather station. If this does not happen and the signal...

Page 9 - B. WIRELESS WEATHER STATION; The Wireless Weather Station comes with the table stand

9 permanently mounting. A. THERMO-HYGRO SENSOR 1. Remove the mounting bracket from the thermo-hygro sensor. 2. Mount using either screws or adhesive tape. 3. Reattach the thermo-hygro sensor to the mounting bracket. B. WIRELESS WEATHER STATION 1. The Wireless Weather Station comes with the table sta...

Page 10 - SPECIFICATIONS; TEMPERATURE MEASURING RANGES

10 • Clean displays and units with a soft, damp cloth. Do not use solvents or scouring agents; they may mark the displays and casings. • Do not submerge in water. • Do not subject the units to unnecessary heat or cold by placing them in the oven or freezer. • Opening the casings invalidates the warr...

Page 11 - WARRANTY INFORMATION

11 WARRANTY INFORMATION La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to th...