Page 2 - Detailed Set-Up Guide; Program Mode; Features & Operations
2 TABLE OF CONTENTS Topic Page Inventory of Contents/ Additional Equipment 3 About WWVB 3 Quick Set-Up Guide 4 Detailed Set-Up Guide Battery Installation 5 Program Mode Function Buttons 6 Time Zone Setting 6 DST (Daylight Saving Time) Setting 7 Language Selection 7 Time Setting 7 Calendar Setting 8 ...
Page 4 - remote temperature sensor; first then into the
4 QUICK SET-UP GUIDE Hint: Use good quality Alkaline Batteries and avoid rechargeable batteries. 1. Have the temperature clock and remote temperature sensor 3 to 5 apart. 2. Batteries should be out of both units for 10 minutes. 3. Place the batteries into the remote temperature sensor first then int...
Page 5 - Replace the battery cover.; TEMPERATURE ALARM; After the batteries have been
5 DETAILED SET-UP GUIDE I) BATTERY INSTALLATION Note: To avoid start-up problems make sure that the batteries do not spring free. A) REMOTE TEMPERATURE SENSOR 1) Remove the battery cover. Place your thumb over the two air-vent slots on the face of the remote temperature sensor, push down gently, and...
Page 6 - PROGRAM MODE; TIME ZONE SETTING; SET”
6 II) PROGRAM MODE To enter the program mode hold down the “ SET” button for 2 seconds, until “-5EST” flashes in the date LCD. The program mode is laid out in a manner that allows you to program each function separately, or you can follow the instructions entirely to program the temperature alarm. C...
Page 7 - LANGUAGE SELECTION FOR THE WEEKDAY; Note: when setting the
7 US English F French E Spanish C) DST (DAYLIGHT SAVING TIME) SETTING Note: The DST default is “On”, meaning that the WWVB will automatically change the time according to Daylight Saving Time in the spring and fall. For areas that do not recognize DST changes (Arizona and parts of Indiana) turn the ...
Page 9 - FEATURES & OPERATIONS; temperature/remote temperature
9 III) FEATURES & OPERATIONS A) CHANGING DISPLAY MODE (DAY, SECONDS, AND TEMPERATURE) There are three possible display modes to view the day, seconds, and temperature. The month&date/weekday /indoor temperature/remote temperature is the default. To change the display: 1) Press and release th...
Page 12 - Do not submerge in water.
12 V) MAINTENANCE & CARE • Extreme temperatures, vibrations, and shock should be avoided to prevent damage to the units. • Clean displays and units with a soft, damp cloth. Do not use solvents or scouring agents—they may mark and damage the displays and casings. • Do not submerge in water. • Imm...
Page 15 - WARRANTY INFORMATION; La Crosse Technology, Ltd
15 WARRANTY INFORMATION La Crosse Technology provides a 1-year warranty on this temperature alarm. Contact La Crosse Technology immediately upon discovery of any defects covered by this warranty. Before sending the temperature alarm in for repairs, contact La Crosse Technology. The temperature alarm...