La Crosse Technology WS-7394U - Manuals

Page 2 - Program Mode

2 TABLE OF CONTENTS Topic Page Inventory of Contents/ Additional Equipment 3 About WWVB 3 Quick Set Up Guide 4 Detailed Set Up Guide Battery Installation 5 Start Up Sequence 6 Explanation of LCD Information 7 Function Key Layout 8 Program Mode Overview of Programming Sequence 8 LCD Contrast Setting ...

Page 3 - INVENTORY OF CONTENTS; WS-7394U—indoor weather station; ADDITIONAL EQUIPMENT (not

3 INVENTORY OF CONTENTS 1. WS-7394U—indoor weather station 2. TX6U—remote temperature (temperature/humidity) sensor 3. Instruction manual and warranty card ADDITIONAL EQUIPMENT (not included) 1. Five fresh AA 1.5V alkaline batteries. 2. One wall-mounting screw (optional) ABOUT WWVB (radio-controlled...

Page 4 - remote temperature sensor; first then

4 QUICK SET-UP GUIDE Hint: Use good quality Alkaline Batteries and avoid rechargeable batteries. 1. Have the indoor weather station and remote temperature sensor 3 to 5 apart. 2. Batteries should be out of both units for 15 minutes. 3. Place the batteries into the remote temperature sensor first the...

Page 6 - Start Up Sequence; Initial Start; WWVB Reception

6 II. Start Up Sequence A. Initial Start 1. Immediately after the batteries have been installed the LCD will completely light up for a brief moment. 2. All information will then appear in normal mode, with “12:00” as the default time and “WE.1” as the default date (2004 as the year). 3. The indoor t...

Page 8 - “SET”

8 IV. Function Key Layout A. The below picture shows the four function keys used in programming and operation of your indoor weather station V. Program Mode The program mode is laid out in a manner that allows you to program each function separately, or you can follow the instructions entirely to pr...

Page 9 - Time Zone Setting

9 C. Time Zone Setting 1. Press and hold the “SET” button for five seconds. 2. “lcd” will appear at the top of the display and a number will flash next to it. 3. Press and release the “SET” button once more to advance to the Time Zone setting. 4. A number will flash to the left of the letter “h” at ...

Page 13 - Forecast Sensitivity Setting; THE MANUAL SETTING IS NOW COMPLETED

13 O. Forecast Sensitivity Setting 1. Press and hold the “SET” button for five seconds. 2. “lcd” will appear at the top of the display and a number will flash next to it. 3. Press and release the “SET” button thirteen more times to advance to the Forecast sensitivity setting. 4. The two air pressure...

Page 14 - “IN”; Outdoor Minimum and Maximum Temperature

14 FEATURES AND OPERATIONS A. Minimum and Maximum Temperature and Humidity 1. Indoor Minimum and Maximum Temperature and Humidity The indoor weather station automatically stores the minimum and maximum indoor temperature and humidity. The minimum and maximum values are updated automatically when a n...

Page 15 - Multiple Remote Temperature Sensors; “CH”

15 Next press and hold the “SET” key for at least three seconds. You will see then that the values will reset to the current temperature and corresponding time. B. Multiple Remote Temperature Sensors The WS-7394U is able to receive signals from 3 different remote sensors. These extra remote sensors ...

Page 16 - Sunny—

16 Each remote sensor will have its own minimum and maximum values stored. C. Comfort Indicator for Indoor Temperature and Humidity 1. The comfort level indicator appears inbetween the indoor tempearture and humidity. 2. The indicator will display a “happy-face” when the temperature is between 68 ° ...

Page 20 - USING THE TABLE STAND; Do not submerge in water.

20 B. Mounting the WS-7394U Indoor Weather Station The indoor weather station can be mounted in two ways: • with the table stand • on the wall with the use of a wall hanging screw (not included) 1. USING THE TABLE STAND The indoor weather station comes with the table stand already mounted. If you wi...

Page 21 - TROUBLESHOOTING

21 TROUBLESHOOTING Problem: The LCD is faint. Solution: 1) Set the LCD contrast to a higher level. 2) Replace batteries. Problem: No outdoor temperature/humidity is displayed. Solution: 1) Remove all batteries, reinsert into the remote temperature sensor first, then into the indoor weather station. ...

Page 22 - Indoor weather station

22 SPECIFICATIONS Indoor weather station recommended operating temperature 32 ° F to 122 ° F (0 ° C to 50 ° C) LCD contrast 8 levels (0-7) Temperature measuring range Indoor 14.2 ° F to 139.8 ° F with 0.2 ° F resolution (-9.9 ° C to 59.9 ° C with 0.1 ° C resolution) (“OFL” displayed if outside this ...