La Crosse Technology WS-7211U - Manuals

Page 2 - TABLE OF CONTENTS; Topic Page

2 TABLE OF CONTENTS Topic Page Quick Setup 3-5 Inventory of Contents 6-7 Detailed Setup Guide Battery Installation 7 Setting the Time 8 Features Minimum and Maximum Temperatures 9 Resetting Minimum and Maximum Temperatures 10 Adding additional remote temperature sensors (optional) 10-11 Weather Fore...

Page 3 - QUICK SETUP; Place the batteries into the; remote temperature sensor; first

3 QUICK SETUP Hint: Use good quality Alkaline Batteries and avoid rechargeable batteries. 1. Have the indoor temperature station and remote temperature sensor 3 to 5 feet apart. 2. Batteries should be out of both units for 10 minutes. 3. Place the batteries into the remote temperature sensor first t...

Page 5 - Fog and mist will not harm

5 feet of resistance and an interior wall can have up to 20 feet of resistance. Your distance plus resistance should not exceed 80 ft. in a straight line. NOTE: Fog and mist will not harm your remote temperature sensor but direct rain must be avoided. To complete the set up of your indoor temperatur...

Page 6 - INVENTORY OF CONTENTS; Figure 2; Figure 1

6 INVENTORY OF CONTENTS 1. The indoor weather station (Figure 1) 2. The remote temperature sensor (TX6U) and mounting bracket. (Figure 2) 3. 3 each, 1/2” Philips screws. 4. One strip of double sided adhesive tape. 5. Instruction Manual and Warranty Card. Figure 2 Holder Figure 1

Page 7 - ADDITIONAL EQUIPMENT; Philips screwdriver.; Do not

7 ADDITIONAL EQUIPMENT (not included) 1. 1 Philips screwdriver. 2. 2 Fresh AA Alkaline batteries. 3. 2 Fresh AA Alkaline batteries DETAILED SETUP GUIDE Battery Installation 1. Install 2 AA batteries in the remote temperature sensor. Make sure they do not spring free, or start-up problems may occur. ...

Page 9 - “CH”

9 FEATURES Minimum and Maximum Temperatures 1. Press and release the “MIN/MAX” button, “MAX” appears between the indoor and remote temperatures. 2. The recorded maximum indoor and remote temperature is displayed. 3. Press and release the “MIN/MAX” button. 4. “MIN” appears between the indoor and remo...

Page 10 - button for 5

10 Resetting Min and Max Temperatures To reset both the minimum and maximum temperatures—press and hold the “MIN/MAX” button for 5 seconds. Adding Additional Remote Temperature Sensors (optional) The WS-7211U is able to receive signals from 3 different remote temperature sensors. Following are some ...

Page 13 - Weather Icons; Sunny

13 Weather Icons There are 3 possible weather icons that will be displayed in the FORECAST LCD: Sunny —indicates that the weather is expected to improve (not that the weather will be sunny). Sun with Clouds — indicates that the weather is expected to be fair (not that the weather will be sunny with ...

Page 14 - Weather Tendency Arrows

14 weather will be rainy). The weather icons change when the unit detects a change in air pressure. The icons change in order, from “sunny” to “partly sunny” to “cloudy” or the reverse. It will not change from “sunny” directly to “rainy”, although it is possible for the change to occur quickly. If t...

Page 15 - To achieve a true temperature; Remote Temperature Sensor

15 arrow pointing down indicates that the air pressure is decreasing and the weather is expected to become worse or remain poor. No arrow means the pressure is stable. MOUNTING Note: To achieve a true temperature reading, avoid mounting in direct sunlight. We recommend that you mount the remote temp...

Page 16 - Indoor Weather Station; The LCD is faint

16 Indoor Weather Station The indoor weather station comes with the table stand already mounted. If you wish to use the table-stand all that is required is to place the indoor weather station in an appropriate location. To wall mount the indoor weather station first remove the table stand. Next inse...

Page 19 - Do not submerge in water.

19 MAINTENANCE AND CARE INSTRUCTIONS • Extreme temperatures, vibration, and shock should be avoided to prevent damage to the units. • Clean displays and units with a soft, damp cloth. Do not use solvents or scouring agents; they may mark the displays and casings. • Do not submerge in water. • Do not...

Page 20 - resolution; Temperature check

20 SPECIFICATIONS Transmitting Frequency 433MHz Measuring Temperatures Indoor Weather Station 32 ° F to 156.2 ° F with 0.2 ° F resolution Remote Temperature Sensor -21.8 ° F to 156.2 ° F with 0.2 ° F resolution Temp accuracy +/- 1 ° F Transmitting range Maximum 80 feet (25m) open space Temperature c...

Page 21 - WARRANTY INFORMATION

21 Station Dimensions: (L x W x H) Indoor Weather Station 5.5” x 3.2” x 1.25” (140 x 81 x 32 mm) Remote Temperature Sensor 1.57 x 0.85 x 5.00 in. (128 x 40 x 23 mm) Battery life Approximately 1 year WARRANTY INFORMATION La Crosse Technology, Ltd provides a 1-year limited warranty on this product aga...