La Crosse Technology WS-7138U - Manuals

Page 2 - TABLE OF CONTENTS; Topic Page; Program Mode; Features

2 TABLE OF CONTENTS Topic Page Inventory of Contents/Additional Equipment 3 Quick Set-Up Guide 4 Detailed Set-Up Guide Battery installation 5 Program Mode Program Sequence and Default Settings 6 Function Keys 7 Setting the Temperature Format 8 Setting 12/ 24-hr Time Mode 8-9 Setting the Time 9 Setti...

Page 3 - INVENTORY OF CONTENTS

3 INVENTORY OF CONTENTS 1. The indoor weather station (Figure 1). 2. One remote temperature/humidity sensor with mounting bracket (Figure 2). 3. Three each, ½” Philips screws. 4. One strip double-sided adhesive tape. 5. Instruction manual and warranty card. ADDITIONAL EQUIPMENT (not included) 1. Two...

Page 5 - Remove the remote temperature/humidity

5 DETAILED SET-UP GUIDE I. BATTERY INSTALLATION A. REMOTE TEMPERATURE/HUMIDITY SENSOR 1. Remove the remote temperature/humidity sensor from the mounting bracket. 2. Remove the screw from the back of the remote temperature/humidity sensor that secures the battery cover door. 3. Remove the battery cov...

Page 6 - PROGRAMMING SEQUENCE AND DEFAULT SETTINGS; Temperature Format

6 seconds, and reinstall making sure to install batteries into the remote temperature/humidity sensor first. PROGRAM MODE Programming Note: If 30 seconds is allowed to pass, or the IN/OUT, SET/CH button is pressed during the programming mode, the unit will confirm/set the last information entered—th...

Page 7 - FUNCTION KEYS

7 II. FUNCTION KEYS The function buttons are located directly below the LCD display. The function of each button is as described below: • IN/OUT, SET/CH o Press for approximately three seconds to enter the setting mode. o Use to enter the setting mode for the following settings: Temperature Unit ...

Page 9 - TIME SETTING

9 5. Press and release the MIN/MAX, + button to select 12 or 24-hour time format. Note: When in the 12-hour format “P.M.” will appear to the left of the hour in the time LCD between the hours of noon and midnight. 6. Press and release the IN/OUT, SET/CH button to confirm and advance to the time sett...

Page 10 - SETTING THE YEAR, DATE AND MONTH

10 VI. SETTING THE YEAR, DATE AND MONTH 1. Press and hold the IN/OUT, SET/CH button for 3 seconds. 2. Either ” ° F” or “ ° C” will flash in the time/date LCD. 3. Press and release the IN/OUT, SET/CH button four times. 4. The year will flash in the time/date LCD. 5. Press and release the MIN/MAX/ + b...

Page 12 - OUTDOOR TEMPERATURE AND HUMIDITY; IV; MINIMUM AND MAXIMUM TEMPERATURE RECORDS; When recalling the indoor temperature/humidity records the

12 II. OUTDOOR TEMPERATURE AND HUMIDITY • The temperature received from the remote temperature/humidity sensor is displayed in the TEMPERATURE/HUMIDITY portion of the LCD. o The current outdoor humidity is also displayed in the bar graph at the top of the LCD. • When there is more than one remote se...

Page 17 - MOUNTING

17 5. Install batteries into the indoor weather station. 6. Follow the Detailed Set-Up Guide for programming and operating instructions. B. VIEWING AND OPERATING WITH MULTIPLE REMOTE TEMPERATURE SENSOR UNITS 1. To view the temperature of a different remote temperature/humidity sensor unit, press and...

Page 18 - I. THE REMOTE TEMPERATURE/HUMIDITY SENSOR; Mounting with screws; A. MOUNTING WITH SCREWS

18 humidity reading in the temperature/ humidity portion of the LCD within 4 minutes of setting up. I. THE REMOTE TEMPERATURE/HUMIDITY SENSOR The remote temperature/humidity sensor can be mounted in three ways: • Mounting with screws • Mounting with adhesive tape • Using the bracket as a stand A. MO...

Page 19 - The indoor weather station can be mounted in two ways:; A. USING THE TABLE STAND

19 5. Position the remote temperature/humidity sensor in the desired location, ensuring that the indoor weather station can receive the signal. C. MOUNTING USING THE STAND The mounting bracket can be used as a stand by simply attaching the bracket to the bottom of the temperature/ humidity sensor. O...

Page 20 - TROUBLESHOOTING; NOTE: For problems not solved, please contact La Crosse Technology.; The LCD is faint; MAINTENANCE AND CARE INSTRUCTIONS

20 4. Gently pull the indoor weather station down to lock the screw into place. TROUBLESHOOTING NOTE: For problems not solved, please contact La Crosse Technology. Problem: The LCD is faint Solution: Replace the batteries Problem: No outdoor temperature/ humidity is displayed. Solution: 1) Remove al...

Page 21 - Do not submerge in water.; Temperature measuring range:

21 • Do not submerge in water. • Immediately remove all low powered batteries to avoid leakage and damage. • Opening the casings invalidates the warranty. Do not try to repair the unit. Contact La Crosse Technology for repairs. SPECIFICATIONS Temperature measuring range: Indoor: 14.2 ° F to 122.0 ° ...

Page 22 - WARRANTY INFORMATION

22 WARRANTY INFORMATION La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to th...