La Crosse Technology WS-7038U - Manuals

Page 2 - Program Mode; Features & Operations

2 TABLE OF CONTENTS Topic Page Inventory of Contents/ Additional Equipment 3 Quick Set-Up Guide 3 Detailed Set-Up Guide Battery Installation 4 Program Mode Function Buttons 5 Time Setting 5 Date Setting 5 Weekday Setting 6 Rain Alarm Setting 6 Resetting Total Rain Amount 6 Features & Operations ...

Page 3 - INVENTORY OF CONTENTS; ) Instruction manual and warranty card.; Rainfall Transmitter.

INVENTORY OF CONTENTS 1) WS-7038U—Wireless Rain Monitor with table stand. (Figure 1). 2) TX5U—Wireless Rainfall Transmitter: includes a base, rainfall collector, and two mounting screws. (Figure 2). 3) Instruction manual and warranty card. 3 ADDITIONAL EQUIPMENT (not included) 1) Two fresh 1.5V AAA ...

Page 4 - batteries do not spring free.; MONITOR; Remove the battery cover on the backside of the unit.

DETAILED SET-UP GUIDE I) BATTERY INSTALLATION Note: Batteries will fit tightly. To avoid start-up problems make sure that the batteries do not spring free. A) RAINFALL TRANSMITTER 1. Remove the flat-head screw and battery cover, located on the underside of the base. 2. Observe the correct polarity, ...

Page 5 - BUTTONS

5 PROGRAM MODE After the batteries have been installed the minute digits of the time display will flash, signaling that the program mode has been automatically entered. If no buttons are pressed, the digits will stop flashing after 50 seconds. To enter the programming mode (when not automatically en...

Page 6 - The total rain amount will constantly accumulate unless the Rain

6 IV) WEEKDAY SETTING Note: The weekday is not represented alphabetically, it is represented numerically, with “1” equal to Monday, and “2” equal to Tuesday, etc. 1) Hold down the RAIN/SET button for 2 seconds, press the RAIN/SET button 4 more times—until the weekday digit flashes (default is “1”). ...

Page 7 - GRAPH; the

7 FEATURES & OPERATIONS I) BAR GRAPH The bar graph displays the rainfall history. As indicated by the appearance of the word “HISTORY” at the left-central area of the LCD screen. The horizontal axis measures the past time periods, with “0” representing the current day, week, or month and “6” rep...

Page 9 - IV) COMPLETE RESETTING OF PRECIPITATION DATA; Manual Reset of the Rain Multiplicator; V) RECEPTION REQUIRMENTS; ) Remove batteries from the Rain Monitor and Rain Gauge.; A) FLASHING RAIN CLOUD

9 IV) COMPLETE RESETTING OF PRECIPITATION DATA Note: The rain data held by the bar chart and other rain totals (excluding the 1-hour total) will be stored and displayed again, even after the batteries have been removed. Therefore it is necessary to apply the following instructions to reset the bar c...

Page 10 - MOUNTING; The Rainfall Transmitter can be mounted in two ways:

MOUNTING Note: Before permanently mounting, ensure that the Rain Monitor is able to receive signals from the Rainfall Transmitter at their desired location. Obstacles such as walls, concrete, and large metal objects can reduce the range. Place units in their desired location, and wait approximately ...

Page 11 - II) THE WIRELESS RAIN MONITOR; The Rain Monitor can also be mounted in two ways:; Do not submerge in water.

II) THE WIRELESS RAIN MONITOR The Rain Monitor can also be mounted in two ways: • with the table stand or, • on the wall with the use of a wall hanging screw (not included). A) USING THE TABLE-STAND 1. The Rain Monitor comes with the table stand already mounted. If you wish to use the table-stand al...

Page 13 - Data Check Intervals:

13 SPECIFICATIONS Recommended operating temperature: Rain Monitor: 32 ° F to 122 ° F (0 ° C to 50 ° C) Rainfall Transmitter: 32 ° F to 122 ° F (0 ° C to 50 ° C) Rainfall Totals: For the previous 6 days, 6 weeks, 6 months, plus current day, week, or month Data Check Intervals: Receiver checking inter...