La Crosse Technology WS-7026U - Manuals

Page 2 - TABLE OF CONTENTS

2 Topic Page Inventory of Contents/Additional Equipment 3 About WWVB 4-5 Quick Set-Up Guide 5 Detailed Set-Up Guide Battery Installation 5-6 Program Mode Function Keys 7 12/24 Hour Time Setting 7 Time Zone Setting 7-8 Daylight Saving Time Setting 8 Time Setting (WWVB & Manual) 9-10 Setting Day, ...

Page 3 - Figure 1; Figure 2

3 INVENTORY OF CONTENTS 1. The Weather Station (Figure 1). 2. One TX4U Thermo Hygro Sensor with mounting bracket (Figure 2). 3. Three each ½” Philips screws. 4. One strip double-sided adhesive tape. 5. Instruction Manual and Warranty Card. ADDITIONAL EQUIPMENT (not included) 1. Four fresh AA 1.5V ba...

Page 4 - Insert two AA batteries into the WEATHER STATION.; THERMO HYGRO SENSOR; Pull the cylindrical rain cover off the sensor.; WEATHER STATION

4 a second per day. These physicists have created an international standard measuring a second as 9,192,631,770 vibrations of a Cesium-133 atom in a vacuum. QUICK SET-UP GUIDE 1. Insert two AA batteries into the Thermo Hygro Sensor. 2. Insert two AA batteries into the WEATHER STATION. 3. Wait 5 minu...

Page 11 - II. WEATHER FORECAST

11 FEATURES OF THE WS-7026U I. BACKLIGHT The WS-7026U has a backlight that can be activated by pressing any of the eight function buttons. After a button has been pressed, the backlight will come on for five seconds before automatically shutting off. II. WEATHER FORECAST The weather forecasting feat...

Page 12 - ICONS; Sunny; B. WEATHER TENDENCY ARROWS

12 A. WEATHER ICONS There are 3 possible weather icons that will be displayed in the FORECAST LCD: Sunny —indicates that the weather is expected to improve (not that the weather will be sunny). Sun with Clouds —indicates that the weather is expected to be fair (not that the weather will be sunny wit...

Page 13 - Adding Outdoor Thermo Hygro Sensors; V. MINIMUM AND MAXIMUM TEMPERATURE RECORDS; IN

13 The current Indoor Temperature (viewed on the left) and Relative Humidity (viewed on the right) are displayed in the INDOOR LCD. The Comfort Level Indicator is located at the center of the INDOOR LCD. The indicator will display a happy face icon when the temperature is between 68 ° F and 79 ° F (...

Page 14 - OUT; C. RESETTING THE MIMIMUM AND MAXIMUM

14 seconds, during either the minimum or the maximum readings, and the unit will automatically return to current data readings. B. VIEWING THE OUTDOOR TEMPERATURE RECORDS 1. Press the OUT button once. “MIN” appears in the upper- center location of the flashing OUTDOOR LCD, indicating that the minimu...

Page 15 - B. SNOOZING AND STOPPING THE ALARM

15 2. Press the IN button to set the alarm hours and the OUT button to set the alarm minutes. 3. Press the AL1 button or wait 15 seconds for the unit to automatically confirm the alarm time and return to display the date in the DATE LCD as normal. 4. The ((1)) icon, appearing in the DATE LCD, indica...

Page 17 - Remove the mounting bracket/receptor from the packaging.

17 and hold the OUT button for 5 seconds, the records for the selected Thermo Hygro Sensor unit will be reset. MOUNTING Note: Before permanently mounting, ensure that the Indoor Temperature Station is able to receive WWVB signals from the desired location. Also, extreme and sudden changes in tempera...

Page 18 - MOUNTING WITH ADHESIVE TAPE; Fit the mounting post into the receptor of the mounting bracket.; II. THE INDOOR TEMPERATURE STATION; with the table stand or; A. USING THE TABLE STAND

18 5. Screw mounting bracket onto the mounting surface. The screws should be flush with the bracket. 6. Fit the mounting post (on the back of the sensor) into the receptor of the mounting bracket. B. MOUNTING WITH ADHESIVE TAPE 1. With a nonabrasive solution, clean and dry the back of the mounting b...

Page 21 - MAINTENANCE AND CARE INSTRUCTIONS; Do not submerge in water.

21 MAINTENANCE AND CARE INSTRUCTIONS • Extreme temperatures, vibration and shock should be avoided to prevent damage to the units. • Clean displays and units with a soft, damp cloth. Do not use solvents or scouring agents. They may mark the displays and casings. • Do not submerge in water. • Immedia...

Page 23 - WARRANTY INFORMATION

23 WARRANTY INFORMATION La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to th...

Page 24 - La Crosse Technology

24 ASSOCIATED WITH THE OPERATION OR MALFUNCTION OF THIS PRODUCT. THIS PRODUCT IS NOT TO BE USED FOR MEDICAL PURPOSES OR FOR PUBLIC INFORMATION. THIS PRODUCT IS NOT A TOY. KEEP OUT OF CHILDREN’S REACH. This warranty gives you specific legal rights. You may also have other rights specific to your Stat...