KTI Networks KS-2240 - Manuals

KTI Networks KS-2240 – Manual in PDF format online.

Manuals:

Manual

Manual KTI Networks KS-2240

Summary

Page 5 - Table of Contents

-5- Table of Contents 1. Introduction ......................................................... 6 1.1 Features ............................................................................... 71.2 Specifications ....................................................................... 9 2. Installing t...

Page 8 - - IP Multicast packet filtering

-8- Management Features: Telnet for remote control Provides one RS232 local console port 802.1D Bridging - 802.1d spanning tree - 802.1P/Q GARP/GVRP Routing - RIP, RIP-2, DHCP-relay, ICMP router discovery message IP Multicast - IGMP Snooping - IP Multicast packet filtering TFTP - software up...

Page 10 - Installing the Switch; country of operation.

-10- 2. Installing the Switch The switch is designed to operate in workgroup environments without a complicated configuration procedure. It also features an auto-select 100- 240V, 50/60Hz power supply unit, which works in most countries around the world. Before connecting the supplied power cord int...

Page 12 - Mounting the Switches; Desktop Mounting

-12- 2.3 Mounting the Switches Desktop Mounting The switches can be placed on a desktop as a stand-alone unit. Allow enough ventilation space between the switch and the objects around it. Desktop Mounting Rack Mounting For mounting the switch into a 19-inch rack, a pair of mounting brackets is inclu...

Page 13 - Making Network Connections; Network Switched Ports; Standard

-13- 3. Making Network Connections 3.1 Network Switched Ports The following figure illustrates the switched ports provided on the front panel. The switch comes with 24 10/100BASE-TX Fast Ethernet switched ports and two Gigabit Ethernet slots for Gigabit Ethernet modules. The following table lists th...

Page 14 - 10/100BASE-TX Fast Ethernet Switched Ports; Gigabit Ethernet Slots

-14- 10/100BASE-TX Fast Ethernet Switched Ports Each switched port supports one connection to a LAN segments. Each segment is an independent shared network in one collision-domain. The connection can be to either a 10BASE-T or a 100BASE-TX device. MDI-X and MDI RJ-45 Connectors MDI-X jack is lab...

Page 17 - Gigabit Ethernet Slots; Module; Module Outline

-17- 3.3 Gigabit Ethernet Slots Each Gigabit Ethernet slot can accommodate one optional Gigabit Ether- net module for your Gigabit connection. The following modules are avail- able for selection: Module Wavelength Connector type Fiber cable 2240-SX 8 5 0 n m SC Multimode fiber 2240-SXJM 8 5 0 n m MT...

Page 18 - Module Installation

-18- The Gigabit Ethernet module supports auto-negotiation although it only operates on 1000M full-duplex mode. This function makes sure the system operates with maximum performance when it is connected to an auto-negotiation capable Gigabit Ethernet device. Duplex Mode Full duplex Fiber cable MM 50...

Page 19 - Making Trunk Connections

-19- 3.4 Making Trunk Connections Two switch units can be cascaded together through any regular switched data port on each unit when a port expansion is required. However, the transfer bandwidth between the two cascaded ports is limited to 200Mbps full duplex. To increase the bandwidth for the conne...

Page 24 - Performing Network Management; Management Support; by using the following methods:

-24- 5. Performing Network Management 5.1 Management Support The switch is featured with management functions and can be managed by using the following methods: _ Direct console connection over an RS232 cable _ Web browser software from Internet or Intranet over TCP/IP network _ Telnet software over...

Page 25 - Management objects; Advanced Management Activities

-25- 5.2 Management objects The following table lists the management objects supported by the system: LoginBasic Management Activities _ General Management Configuration - system parameters _ LAN Port Configuration - speed, link type, duplex, flow control _ Console Port Configuration - console baud ...

Page 26 - Setting IP Address; management before performing any in-band management operation.

-26- _ Other Protocols - GVRP, IGMP _ Port Trunking _ Port Mirroring _ File transfer - software upgrade LogoutSave settingsRestore default settingsReboot 5.3 Setting IP Address Before performing any management operation over network, the most important thing is to learn the detailed information abou...

Page 27 - Console Management; Any PC running Windows 95/98/ or NT can be used as a console. Use; Factory default settings of the Console port; activates the highlighted option.; Navigating Through the Console Interface To

-27- 5.4 Console Management Any PC running Windows 95/98/ or NT can be used as a console. Use the supplied RS232 cable and connect the console port to the COM port of your console PC. Use Windows Hyper Terminal program to perform this out-of-band management operations. Factory default settings of th...

Page 28 - from a PC COM port. The pin assignments of the connection are:; Switch DTE console port; nect to the managed unit using the IP address as URL address.; Telnet Management; Use Telnet software to perform the management operation. The most

-28- Use the supplied RS232 cable to make the console connection directly from a PC COM port. The pin assignments of the connection are: Switch DTE console port 9-pin PC COM port Pin 1 DCD -------------------------------- Pin 1 2 RXD -------------------------------- 3 3 TXD -------------------------...

Page 29 - SNMP and RMON Management; File transfer

-29- 5.7 SNMP and RMON Management SNMP management and RMON activities are performed at a network management station running SNMP network management application manager software with graphical user interface. The switch serves as an SNMP agent and provides RMON capabilities that allows network admini...