KTI Networks KGS-2401 - Manuals

Page 4 - Table of Contents

- 4 - Table of Contents 1. Unpacking Information ............................................................................................. 6 2. Introduction to 24-port Gigabit Web Smart Switch ................................................ 7 2.1 General Description ...............................

Page 6 - Unpacking Information

- 6 - 1. Unpacking Information Thank you for purchasing the 24-port Gigabit Web Smart Switch. Before you start, please check all thecontents of this package. The product package should include the following: 1. One 24-port Gigabit Web Smart Switch 2. One power cord 3. Rubber foot and screws 4. Rack-...

Page 7 - Introduction to 24-port Gigabit Web Smart Switch; General Description

- 7 - 2. Introduction to 24-port Gigabit Web Smart Switch 2.1 General Description The device is a 24-port 10/100/1000Mbps Ethernet Web Smart Switch. Compare to the traditional 10/100Mbps Ethernet, the switch delivers a dedicated Gigabit connection toevery attached client with no congestion issue. Th...

Page 10 - Installing 24-Port Gigabit Web Smart Switch; Desktop Installation

-10- 3. Installing 24-Port Gigabit Web Smart Switch This switch can be placed directly on your desktop, or mounted in a rack. Users can immediately usemost of the features simply by attaching the cables and turning the power on. 2.1 Desktop Installation For desktop installation, the switch needs to ...

Page 12 - Functional Description; Quality of Service

-12- 4. Functional Description 4.1 PHY Monitoring and Port Mode Set-up It is a major task of the software to continuously monitor the PHYs in order to set up the switch portsaccording to whether the link is down or up and in the latter case what the current speed, duplex modeand pause capabilities a...

Page 13 - Web Management guide; Factory Default value:; Access the Switch

-13- 5. Web Management guide This section instructs you how to enter and set up the configurations, which can be accessed by RS-232 serial port (out-of-band) on the rear panel or by Internet Browser over the network (in-band). Factory Default value: IP : 192.168.1.1 Subnet Mask: 255.255.255.0 Defaul...

Page 16 - Functions

-16- 5.2.1 System To set up the system configurations such as login value, time-out value and enabling the VLAN Man-agement. Status & Setting Functions Mac Address The Mac Address of the switch S/W Version To check up the Software Version, see this. H/W Version The Hardware version Inactivity Ti...

Page 26 - Product Specifications

-26- 6. Product Specifications Standard IEEE802.3 10BASE-T IEEE802.3u 100BASE-TX IEEE802.3x full-duplex operation and flow control IEEE802.3ab 1000BASE-T IEEE802.1Q VLAN interoperability Interface 24 * 10/100/1000Mbps auto MDI/MDI-X RJ-45 switching ports 1 * RS-232 Console port Cable Connections RJ-...

Page 27 - Command Line Interface; Command Hierarchy

-27- 7. Command Line Interface 7.1 Start-up and Terminal configuration To start-up the command line interface, connect a PC COM port to the RS-232 connector and activatea terminal emulation software (e.g. HyperTerminal of Windows.). The terminal emulation softwareshould be set up as follows: 1. Data...

Page 29 - Entering Commands; enter system configuration at top level or at prompt System>)

-29- 7.5 Entering Commands Commands are given by entering the command string. The command string is not case-sensitive. There are three possible situations for entering the command: 1. At any level or group: you should enter the full syntax of the command with a / in front of the syntax (ex, enter /...

Page 30 - Command Description

-30- 7.6 Terminology The following table shows general parameter types used in command syntaxes and descriptions. <port> The port number <portlist> Comma and/or dash separated port list. This type can be used for specifyingindividual ports or a range of ports. The keyword none can be use...

Page 41 - Factory Default Configuration

-41- 8. Factory Default Configuration The factory default configuration is a VLAN aware L2 switch with automatic learning/ageing and autonegotiation enabled on all ports: System: The system name string is empty. Console: The password string is empty and inactivity timeout is disabled. The prompt is ...