Kompernass ULG300A1 - Manuals

- 5 - 8. Preparing for hot lamination ➩ Insert the foil guide rails q in the designated holes on the rear of the laminator. ➩ Fold out the document supports s , so that the documents can be pulled in straight into the slotfor manual foil feed t . ➩ Insert the plug of the laminator into a mains power...

- 6 - 9. Preparing for cold lamination If you have previously performed hot lami-nation: After hot laminating, allow the laminatorto cool down completely before beginningwith cold lamination. Remember, the rollersinside the laminator will still be hot. Thesecan damage the laminating pouch and thedoc...

- 7 - ➩ If you do not want to start another laminationprocess, turn the foil thickness switch o to ABS (OFF) and withdraw the plug from the mains power socket. 11. Anti-Blocking Switch (ABS) At the start of the lamination process, the pouchmay be pulled in at an angle or jam itself inside theapplian...

- 8 - ➩ Then run a sheet of DIN A3 paper, folded inthe middle (maximum thickness 1.0 mm) … • without a laminating pouch and• with the fold first … slowly into the slot for manual pouch input t . ➩ Release the sheet as soon as you notice itbeing pulled in automatically. • The contaminants on the roll...