Kompernass PWS 1200 - Manuals

Page 3 - Table of Content

5 GB/IE/CY 5 GB/IE/CY Introduction Proper use .....................................................................................................................Page 6Features and equipment ...............................................................................................Page 7Include...

Page 4 - Please make sure you familiarise your-; Proper use; Slots cut in load-bearing walls must comply; Introduction

6 GB/IE/CY Angle grinder PWS 1200 Grinding, roughing, cutting and polishing Introduction Please make sure you familiarise your- self fully with the way the device works before you use it for the first time and that you understand how to handle electrical pow-er tools correctly. To help you do this p...

Page 5 - Noise and vibration data:; Safety advice; Introduction / Safety advice

7 GB/IE/CY Features and equipment 1 Locking knob 2 Handle with softzone grip 3 ON/OFF switch 4 Carbon brushes access cover 5 Auxiliary handle 6 Adjustable disc guard cover 7 Clamping nut 8 Mounting spindle 9 Mounting flange 10 Spindle lock button 11 Rotation speed preselector wheel (Fig. A) 12 Spann...

Page 8 - Warning! Danger of electric shock; Advice on use; Roughing discs

10 GB/IE/CY and tools are installed. J Do not use separate reducing bushes or adapt- ers in order to make grinding discs with a larg-er bore fit. J When using abrasive consumables and tools with a threaded insert make sure that the tread is long enough for the spindle length. J Do not work in areas ...

Page 9 - Cutting discs; Use

11 GB/IE/CY Cutting discs Never use roughing or grinding discs for cutting! J Only use certified fibre-reinforced cutting or grinding discs approved for use at circumferen-tial speeds of not less than 80 m/s. m Caution! The disc continues to rotate after the device has been switched off. Do not atte...

Page 11 - These may only be used in combination; Use of accessories

13 GB/IE/CY Use of accessories Cutting / roughing discs You can use the following cutting or roughing/grinding discs with this device:Dimensions: ø 125 x 22,2 mm to max. 6 mm thick (depressed centre) Speed: 12,000 rpm Circumferential speed: 80 m / sec ø 125 x 22,2 mm max. 6 mm Dicke (gekröpft)12000 ...

Page 12 - Use of accessories / Maintenance and cleaning / Disposal

14 GB/IE/CY Cup brush, twisted wire Dimensions: ø 75 mm Cup brush, knotted wireDimensions: ø 115 mm Adjusting the disc guard cover J Pull the mains plug out of the mains socket before you carry out any task on the device. J Danger of injury! Always use the angle grinder with the disc guard cover 6 i...

Page 13 - Have your device repaired only by qualified; Declaration of Conformity /; Disposal / Information

15 GB/IE/CY compatible recycling.Contact your local refuse disposal authority for more details of how to dispose of your worn out electrical devices. Information Service centre The service centre for your country is shown in the warranty documentation. J Have your device repaired only by qualified s...