Kompernass PKGS1450 - Manuals

Introduction / Safety L Replaceable parts You can replace the following parts yourself. When you do this always observe the relevant ope-rating instructions and safety advice. - Sawdust collection bag (a) - Laminate cutting attachment { - Stop plate q - Saw blade Have any other maintenance and repai...

Safety J Do not operate the device if it is damp and do not use it in a damp environment. Protecting yourself from laser radiation: Note: This product is a Class 1 Laser / Protection Class III device. The radiation output under circum-stances of proper use does not present any danger. J The chop and...

Safety / Operation 9 GB/IE J Always ensure that all the clamps and stops are firmly held in place. J Never saw through more than one workpiece at a time. J Ensure that the saw blade has reached full speed before starting your cut and avoid using too much force. In that way you will prevent the saw b...

Operation 3. Saw blade depth Wear protective gloves! j Check the depth of the saw blade by first lowering the saw motor unit Q as far down as possible. Then try turning the saw blade manually. It must be able to turn freely. If the saw blade does not turn freely, carry out the necessary adjustment b...

For use with standard cuts, the mitre angle scale P has easily engaged fixed stop points for the most common positions, 0°, 15°, 22.5°, 30° and 45°. L Inclined cuts – inclining the saw motor unit With the PKGS 1450 LASER you can make inclined cuts between 90° and 45°. j Loosen the setting knob w and...