Page 2 - Measuring Tape with Marking; Operating instructions
Measuring Tape with Marking Laser KH 3229 Operating instructions KH3229_UK 04.12.2006 13:35 Uhr Seite 2
Page 6 - Safety instructions; • Do not allow the measuring tape
Measuring Tape withMarking Laser KH3229 Safety instructions Injury Hazard! • Do not allow the measuring tape to rewind itself without control. • NEVER leave children unsupervised with the measuring tape. The appliance contains a Class 2laser. NEVER direct the laserbeam at people or animals. NEVER lo...
Page 7 - • Do NOT direct the laser beam; Intended Usage
• Do NOT direct the laser beam at strongly reflective material.Reflected laser beams are alsodangerous. Intended Usage The Measuring Tape with MarkingLaser serves for the measuring oflengths. Additionally, a horizontal ora vertical line can be projected. TheMeasuring Tape with Marking Laseris intend...
Page 9 - Technical data; Vertically; Inserting the batteries; • Open the battery compartment
Technical data Measurement accuracy :Horizontally 0,5 mm / m Vertically 2 mm / 3 m Laser class: II Wave length: 650 nm Batteries : 3x LR44Button batteries Measuring tape: 7,5 m Inserting the batteries • Open the battery compartment . • Ensure that the tape used to remove the batteries lies under-nea...
Page 10 - Using the measuring tape; • Pull out the measuring tape
• Insert the batteries into the bat- tery compartment as shown onthe battery compartment lid . • Close the battery compartment lid. Using the measuring tape With the measuring tape you canread off measurements of length inthe metric system or in the Anglo/American system. The upper scaleshows length...
Page 12 - Using the laser; • NEVER direct the laser beam at; Using the laser with a tripod
Using the laser Injury Hazard! • NEVER direct the laser beam at people or animals. NEVER lookdirectly into the laser. The lasercan cause serious eye damage. • Do NOT direct the laser beam at strongly reflective material.Reflected laser beams are alsodangerous. Using the laser with a tripod The tripo...
Page 14 - • Direct the laser line onto the
• Direct the laser line onto the desired wall. If you direct the laser beam in hori-zontal adjustment into a corner, the laser beams on both walls andin the corner are at exactly the samedistance from the floor (see Fig.2: 3 Point measurement). Fig. 1: Horizontal measurement - 12 - KH3229_UK 04.12.2...
Page 15 - Using the laser without a tripod; • Place the Measuring Tape with
Fig. 2: 3 Point measurement Fig. 3: Vertical measurement Using the laser without a tripod • Place the Measuring Tape with Marking Laser on the levellestpossible surface. 1m 1m 1m - 13 - KH3229_UK 04.12.2006 13:36 Uhr Seite 13
Page 17 - Cleaning and Care; • Clean the appliance with a lightly; Disposal
Cleaning and Care • Clean the appliance with a lightly moist cloth. Never use aggressivecleansers. They can damage thesurfaces. • Do not permit fluids to permeate into the interior of the appliance. Disposal Do not dispose of the appliancein your normal domesticwaste. - 15 - KH3229_UK 04.12.2006 13:...
Page 18 - Disposing of batteries!
Dispose of the appliance through anapproved disposal centre or at yourcommunity waste facility. Observe the currently applicable re-gulations. In case of doubt, consultyour local disposal facility. Disposing of batteries! Batteries must not be disposed of inthe household waste. Every consumeris lega...
Page 19 - Service; DES Ltd
Service DES Ltd Units 14-15Bilston Industrial EstateOxford StreetBilstonWV14 7EGTel.:0870/787-6177Fax: 0870/787-6168e-mail: [email protected] Kompernass Service Ireland c/o Irish Connection41 Harbour viewHowth Co. DublinTel: 087-99 62 077Fax: 18398056e-mail: [email protected] - 17 - ...
Page 20 - Importer
Importer KOMPERNASS GMBHBURGSTRASSE 21D-44867 BOCHUMwww.kompernass.com - 18 - KH3229_UK 04.12.2006 13:36 Uhr Seite 18