KOBE ISX2430SQB-2 - Manuals

KOBE ISX2430SQB-2 Range Hood – User Manual in PDF format online.

Manuals:

User Manual

User Manual KOBE ISX2430SQB-2

Summary

Page 2 - READ BEFORE INSTALLATION; Carefully check all contents of packages.; IF THERE IS ANY PROBLEM:; Contact your merchant for product replacement due to shipping; PRODUCT HAS BEEN INSTALLED

IMPORTANT READ THIS FIRST READ BEFORE INSTALLATION 1. Carefully check all contents of packages. 2. Thoroughly inspect the unit for any shipping damages, cosmetic damages or defects. 3. Have a certified contractor/electrician test the unit before installation. IF THERE IS ANY PROBLEM: 1. DO NOT INSTA...

Page 3 - - READ ALL INSTRUCTIONS CAREFULLY BEFORE STARTING -; A L L W I R I N G M U S T B E D O N E B Y A P R O F E S S I O N A L A N D I N

[ENGLISH] - READ AND SAVE THESE INSTRUCTIONS - CONTENTS IMPORTANT SAFETY INSTRUCTIONS .................................................................................... 1 COMPONENTS OF PACKAGE .................................................................................................. 3 INST...

Page 4 - IMPORTANT SAFETY INSTRUCTIONS; - PLEASE READ THIS SECTION CAREFULLY BEFORE INSTALLATION -; ) Ducted fans must be vented to the outside.; WARNING; : TO REDUCE THE RISK OF PERSONAL INJURY IN THE EVENT OF A RANGE; power from switching on accidentally.

1 IMPORTANT SAFETY INSTRUCTIONS - PLEASE READ THIS SECTION CAREFULLY BEFORE INSTALLATION - WARNING : TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PERSONAL INJURY, OBSERVE THE FOLLOWING: 1) Installation and electrical wiring must be done by qualified professionals and in accordance with all applicab...

Page 5 - What to Do In The Event Of a Range Top Grease Fire; NEVER PICK UP A BURNING PAN – You May Get Burned.; What to Do If You Smell Gas; Extinguish any open flame.; CAUTION

2 What to Do In The Event Of a Range Top Grease Fire • SMOTHER FLAMES with a tight fitting lid, cookie sheet, or metal tray, and then turn off the burner. KEEP FLAMMABLE OR COMBUSTIBLE MATERIAL AWAY FROM FLAMES. If the flames do not go out immediately, EVACUATE THE AREA AND CALL THE FIRE DEPARTMENT ...

Page 6 - COMPONENTS OF PACKAGE; (Must keep all material for returns or refunds); G l a s s C a n o p y B o x ( B o x 1 o f 3 )

3 COMPONENTS OF PACKAGE (Must keep all material for returns or refunds) G l a s s C a n o p y B o x ( B o x 1 o f 3 ) R a n g e H o o d B o x ( B ox 2 of 3) { A} G l a s s C a n o p y { B } K O B E R a n g e H o o d { C } W a r r a nt y R e g i s t r a t i on C a r d { D } Q u i c k R e f e r e n c ...

Page 7 - INSTALLATION; PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING; TABLE 1; SAFETY WARNING

4 INSTALLATION PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING Calculation before Installation To calculate installation, please refer to TABLE 1. (All calculation in inches.) TABLE 1 A = Height of Floor to Ceiling B = Height of Floor to Counter Top (Standard: 36”) C = Preferred Height of Counter ...

Page 8 - Preparation before Installation; NOTE: TO AVOID DAMAGE TO YOUR HOOD,; Hood Installation; : If moving the cooking range is; Cut and remove ceiling drywall. Install 2” x 4” cross

5 Preparation before Installation NOTE: TO AVOID DAMAGE TO YOUR HOOD, PREVENT DEBRIS FROM ENTERING THE VENT OPENING. • Decide the location of the venting pipe from the hood to the outside (Figure 1). • A straight, short vent run will allow the hood to perform more efficiently. • Try to avoid as many...

Page 9 - : MAKE SURE THE TELESCOPIC; : MAKE SURE THE HOOD IS

6 6. Adjust the telescopic stack with sixteen screws and washer (pre-installed). Refer to Figure 5. 7. Align the telescopic stack to the mounting screws on the ceiling and lock the telescopic stack in place. Fasten the mounting screws as shown in Figure 6. 8. Slide the duct covers up the telescopic ...

Page 10 - Connect the electrical wires according to color; Ductwork Installation; Use 6” round aluminum or steel pipe (not provided); Final Assembly; Make sure to leave this manual for the homeowner.; Duct Cover Installation

7 Wiring to Power Supply THIS RANGE HOOD MUST BE PROPERLY GROUNDED. MAKE SURE THIS IS DONE BY QUALIFIED ELECTRICIAN IN ACCORDANCE WITH ALL APPLICABLE NATIONAL AND LOCAL ELECTRICAL CODES. BEFORE CONNECTING WIRES, SWITCH POWER OFF AT SERVICE PANEL AND LOCK SERVICE PANEL TO PREVENT POWER FROM BEING SWI...

Page 11 - OPERATING INSTRUCTIONS

8 OPERATING INSTRUCTIONS Note: For best results, turn fan on prior to any preparation or cooking and keep fans running while cooking. Adjust speed as needed. Power Control Press Power Control to turn On/Off the range hood. Speed Control To adjust the speed level, press button to decrease the speed a...

Page 12 - Baffle Filter Indicator; The “C” will disappear and a new cycle starts.

9 Light Control Press button to turn LED lights ON and OFF. The LED lights have 4 brightness levels, ranging from 1 to 4 (1 being the lowest and 4 being the brightest). Press and hold down button to increase the brightness by 1 level every 3 seconds. The level you use will be the same the next time ...

Page 13 - MAINTENANCE; Once the baffle filter is cleaned, press and hold

10 MAINTENANCE For optimal performance, clean the range hood surface and baffles regularly. To Clean Hood Surface CAUTION: NEVER USE ABRASIVE CLEANERS, PADS, OR CLOTHS. *** Regular care will help preserve its fine appearance. 1. Use only mild soap or detergent solutions. Dry surfaces using soft clot...

Page 14 - SPECIFICATIONS; Round

11 SPECIFICATIONS MODEL / SIZE ISX2430SQB-2 (30”) ISX2436SQB-2 (36”) ISX2442SQB-2 (42”) COLOR 20-Gauge Commercial Grade Stainless Steel CONSUMPTION / AMPERE 180W / 1.5A NUMBER OF BLOWER 1 DESIGN Seamless / Satin Finish BLOWER TYPE Single Horizontal Squirrel Cage EXHAUST Top – 6 " Round CONTROLS ...

Page 15 - MEASUREMENTS & DIAGRAMS

12 MEASUREMENTS & DIAGRAMS ***All inch measurements are converted from millimeters. Inch measurements are estimated. ***All measurements in ( ) are millimeters.

Page 16 - PARTS LIST

13 PARTS LIST MODEL NO.: ISX2430SQB-2 (30”) ISX2436SQB-2 (36”) ISX2442SQB-2 (42”) NO. DESCRIPTION MODEL PART NO. 1 Inner Duct Cover ISX24-0001 2 Outer Duct Cover ISX24-0002 3 Capacitor ISX24-0003 4 Exhaust Plate ISX24-0004 5 Processor Board ISX24-0005 6 Glass Canopy ISX2430SQB-2 ISX24-3006 ISX2436SQ...

Page 18 - CIRCUIT DIAGRAM

15 CIRCUIT DIAGRAM MODEL NO.: ISX2430SQB-2 (30”) ISX2436SQB-2 (36”) ISX2442SQB-2 (42”)

Page 19 - TROUBLE SHOOTING; Issue

16 TROUBLE SHOOTING Issue Possible Cause Solution After Installation, both motors and lights are not working. The power is not on. Make sure the circuit breaker and the unit’s power is ON. Use a voltage meter to check the power supply. The wire connection is not secure. Check and tighten wire connec...

Page 20 - WARRANTY; WARRANTY CERTIFICATE; WHAT IS NOT COVERED:; intended purpose which is residential indoor usage only.

17 WARRANTY WARRANTY CERTIFICATE In order to obtain warranty service, you must provide proof of original purchase from a KOBE authorized Dealer. Please keep a copy of your original invoice as proof of purchase. ONE-YEAR LIMITED LABOR WARRANTY ON KOBE BRILLIA SERIES: For one year from the date of you...

Page 22 - WARRANTY INFORMATION FORM

19 WARRANTY INFORMATION FORM Fill in the blanks and keep this paper with the original invoice in a safe place for future service purpose. 1. Date of purchase : 2. Model No. : 3. Serial No. : For warranty service or spare parts purchase contact: KOBE Service Center (USA ONLY) Toll Free: 1-877-BUY-KOB...

Page 23 - KOBE Range Hoods

KOBE Range Hoods 11775 Clark Street Arcadia, CA 91006 USA www.koberangehoods.com This KOBE hood is made for use in the USA and CANADA only. We do not recommend using this hood overseas as the power supply may not be compatible and may violate the electrical code of that country. Using a KOBE hood ov...