Kidde 1235 - Manuals

• For mobile home installation, select locations carefully to avoid thermal barriers that may form at the ceiling. For more details, see MOBILE HOME INSTALLATION below. • When mounting an alarm on the ceiling, locate it at a minimum of 4” (10 cm) from the side wall (see Diagram A). • When mounting t...

NOTE: Use standard UL listed household wire (18 gauge or larger as required by local codes) avail-able at all electrical supply stores and most hardware stores. MOUNTING INSTRUCTIONS CAUTION: THIS UNIT IS SEALED. THE COVER IS NOT REMOVABLE! 1. Remove the trim ring from the back of the alarm by holdi...

WHEN UNITS ARE INTERCONNECTED, only the red LED of the alarm which senses the smoke or isbeing tested (the originating unit) will flash rapidly. All other units in the interconnect system will soundan alarm but their red LED’s will NOT flash rapidly. The green LED has two modes of operation. Standby...