Kicker CVR12 - Manuals - manualsarea.com

Page 2 - ALWAYS KEEP YOUR RECEIPT!

2 Introduction CompVR Subwoofer Owner’s Manual Models: CVR15 / CVR12 / CVR10 / CVR8 CompVR Subwoofers Attention: Please record your purchase information in the area below. We recommend attaching the original sales receipt to this manual for future reference. If you require service on this speaker du...

Page 3 - tures; Features

3 CompVR Subwoofers F e a tures Features Injection Molded Polymineral Cone with ISD ™ (Inverted Structural Dome) is a high performance composite, which remains rigid, minimizes cone flex and lowers harmonic distortion. The CompVR’s cone consists of a unique one-piece, aluminum vapor-deposit material...

Page 4 - Specifica; Performance; CVR8 CVR10 CVR12 CVR15

4 CompVR Subwoofers Specifica tions Performance Model: CVR8 CVR10 CVR12 CVR15 Nominal Impedance [Zn], ohm [per coil] Resonance Frequency [fs], Hz Sensitivity [SPLo], dB @ 1W, 1m Effective Piston Area [Sd], in 2 (m 2 ) Power Handling Watts, Peak (RMS) Effective Frequency Range, Hz Effective Excursion...

Page 5 - Installa; Wiring Options; Black; Black; Parallel Wiring

CompVR Subwoofers Installa tion Wiring Options 5 CompVR subwoofers are available with dual 2 Ω (ohm) or dual 4 Ω voice coils. Both coils must be connected to a source of amplification. The dual 2 Ω woofer will generate a 1 Ω load if the coils are wired in parallel or a 4 Ω load in series. The dual 4...

Page 6 - Box Building Notes; A Note on Power Handling Capacity

6 CompVR Subwoofers Installa tion Box Building Notes A Note on Power Handling Capacity CompVR subwoofers will handle large amounts of power in any of the recommended enclosures, sealed or vented. The smaller enclosures are best for use in limited-space applications. The larger recommended enclosures...

Page 7 - Recommended Enclosures; CompVR Sealed Enclosure Applications; Model

7 CompVR Subwoofers Installa tion Recommended Enclosures CompVR Sealed Enclosure Applications The Kicker CompVR is designed to give more output than competing subwoofers on the market and excels when used in the recommended sealed boxes. These sealed enclosure designs will give the smoothest respons...

Page 8 - CompVR Ported (Vented) Enclosure Applications

8 CompVR Subwoofers Installa tion Panel Dimensions for Minimum Recommended Sealed Enclosures using 3/4” (1.9 cm) thick MDF: 1 in = 2.54 cm1 in = 25.4 mm1 ft 3 = 28.32 L Model CVR8 CVR10 CVR12 CVR15 Volume, ft 3 (L) .4 (11.3) .8 (22.7) 1.0 (28.3) 1.8 (51.0) Panel A, in 11 x 11 13.5 x 13.5 14.5 x 14.5...

Page 9 - Recommended Rectangular Port Enclosures – High Efficiency

9 CompVR Subwoofers Installa tion Recommended Rectangular Port Enclosures – High Efficiency Model Compact SPL / Deep Bass .8 ft 3 (22.7 L) + port displacement 1.5” x 8" port, 20.75" long (3.8cm x 20.3cm port, 52.7cm long) Power Handling = 75W RMS 1.25 ft 3 (35.4 L) + port displacement 2” x 1...

Page 11 - Notes