Kicker RMB8 - Manual
Kicker RMB8 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Installation Instructions; Mounting
- Page 3 – Wiring; electronic crossover and a dedicated amplifier.
- Page 4 – HOW LONG WILL IT TAKE?; SPEAKER SYSTEMS LIMITED WARRANTY; one (1) year from date of original purchase from an Authorized
Congratulations! You have just purchased one of the latest in a
long line of exceptional car audio products from Stillwater Designs.
Your KICKER Midbass drivers were designed and engineered by the
same team which created many other international award winning
KICKER products like the Solo-Baric
fi
, Comp VR and Resolution driv-
ers. It contains a number of cutting-edge features to give you out-
standing per formance and dependability. Thanks for buying KICKER.
Enjoy.
Features
NEW FOR 2002!
•Ultra Slim Midbass Drivers
Gives you
real low frequency output from factory loca-
tions.
•CIMP (Curvilinear Injection-Molded Polygraphite) Woofer Cones
For smooth
extended frequency response.
•Santoprene Surround
Tough, flexible surround with long throw, to control extreme
cone excursions.
•
Blackened Motor Structure and Kapton™ Voice Coil Formers
For exceptional
thermal power handling capability.
•SSD (Spun Spoke Design)
Enhances the cosmetics and provides a solid anti-resonant
foundation for the motor assembly.
•Spring Loaded Nickel Plated Terminals
For solid connections with large gauge
speaker wire.
RMB6 / RMB8
Specifications
MODEL
Frequency Power Cut Out
Mounting Depth Sensitivity
Response Peak / RMS (in. / cm) (in. / cm) (1 W / 1 M)
RMB 6
30-500
250 / 125 5 5/8 / 14.29
2 / 5.08 88
RMB 8
30-500 350 / 175 7 1/4 / 18.42
2 1/4 / 5.8 89
Available in 4 ohm models only.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Installation Instructions Your KICKER drivers are specifically designed for mounting in free-air applica- tions. While the speakers do not require a sealed enclosure for optimum per- formance, it is important to isolate the sound coming off the front of the driver from the sound radiating from the b...
Wiring Your Midbass driver has two spring loaded terminals. The red terminal is con- nected to the positive wire and the black terminal is connected to the negative wire from the source unit or amplifier. Since your midbass drivers have a limited frequency range it is recommended to use a bandpass c...
• Install slips (screwdriver holes) • Damage caused by exposure to water and/or excessive heat. • Damage through negligence, misuse, or accident. • Items physically damaged due to abuse. • Freight damage. • The cost of shipping product to Stillwater Designs Service. HOW LONG WILL IT TAKE? Stillwater...
