Keys Fitness KPS-LP2 - Manuals

Page 2 - Table of Contents

Table of Contents 2 Important Safety Information 3 Before You Start 4 Assembly 5-11 Weight Ratios 12 Exploded View 13 Parts List 14 Warranty Information 15

Page 3 - Important Safety Information; THANK YOU; for making this Power System unit a part of your exercise pro-; REGISTRATION CARD; • Product Series

Important Safety Information 3 THANK YOU for making this Power System unit a part of your exercise pro- gram. Keys Fitness and our Power System Series assures the very best in value,appearance, durability and biomechanics. This manual will guide you through the assembly process. If at any time you a...

Page 5 - Assembly

Page 7 - Figure 1

Step 1 Slide one Pillow Block Bearing (17) onto each side of the Back Rocker (5). Use two Bolts (33), four Washers (44), and two Nylon Locknuts (41) to attach each Pillow Block Bearings (17) onto the Main Frame (1). Slide Short Spacer Tube (12) into the Front Rocker (4). Attach the Front Rocker (4) ...

Page 8 - Figure 2

Assembly 8 Step 2 Attach Foot Plate (7) to the Connect Frame (6) using three Bolts (32), three Washers (44), and three Nylon Lock-nuts (41). Attach Right Handle (2) and Left Handle (3) to the Main Frame (1) using two Bolts (39), four Washers (43), and two Nylon Lock-nuts (42). Figure 2

Page 9 - Figure 3

Assembly 9 Step 3 Attach Cross Base (8) to Main Frame (1) using Plate (14), two Bolts (39), four Washers (43), and two Nylon Lock-nuts (42). Slide Pulley Block (10) onto the Cross Base (8) and secure in place using two Bolts (40), four Washers (43), and two Nylon Lock-nuts (42). Figure 3

Page 10 - Figure 4

Assembly 10 Figure 4 Step 4 Attach Seat Pad (24) to Main Frame (1) using two Bolts (38) and two Washers (43).Assemble Back Pad (23) to Back Pad Support (9) using two Bolts (35) and two Washers (43). Slide Back Pad Support assembly to Main Frame (1) and secure using Pop Pin (16).

Page 11 - Figure 5

Assembly 11 Step 5 Start by attaching Cable (15) to Main Frame (1). See detail A below. Insert cable into Pulley A location and then attach Pulley A to Main Frame (1) using one Bolt (36), two Washers (43), and one Nylon Locknut (42). Note: Make sure cable is running through the groove of each pulley...

Page 12 - Weight Ratios

Weight Ratios 12 KPS-LP2 Ratio % Weight(lbs) 205% 10 20.5 15 30.75 20 41 25 51.25 30 61.5 35 71.75 45 92.25 55 112.75 65 133.25 75 153.75 85 174.25 95 194.75 105 215.25 115 235.75 125 256.25 140 287 155 317.75 170 348.5 185 379.25 200 410

Page 13 - Exploded View

Page 14 - Parts List

REF# KEYS PART# DESCRIPTION QTY. 1 223-00249 Main Frame 1 2 219-00280 Right Handle 1 3 219-00285 Left Handle 1 4 223-00250 Front Rocker 1 5 223-00251 Back Rocker 1 6 219-00282 Connect Frame 1 7 223-00252 Footplate 1 8 223-00253 Cross Base 1 9 219-00283 Back Pad Support 1 10 219-00284 Pulley Block 1 ...

Page 15 - Warranty Information; POWER SYSTEM SERIES

Warranty Information 15 KEYS FITNESS PRODUCTS, L.P. POWER SYSTEM SERIES LIFETIME WARRANTY This Warranty applies in the United States and Canada to products manufactured or distributed by KeysFitness Products, LP (“Keys”) under the KEYS brand name. The warranty is non-transferable and validonly to th...