Keys Fitness KPS-CG - Manuals

Page 2 - CALL; • Product Series

THANK YOU for making this Power System unit a part of your exercise program. Keys Fitness and our Power SystemSeries assures the very best in value, appearance, durabilityand biomechanics. This manual will guide you through the assembly process. If at any timeyou are having trouble with the assembly...

Page 3 - Do not use this unit with bare feet, sandals, socks or stockings!

BEFORE YOU START Prior to assembly, remove components from the box and verify that all the listed partswere supplied. Before using this unit or starting any exercise program, consult your physician. This isespecially important for persons over the age of 35 and/or persons with pre-existinghealth pro...

Page 4 - ASSEMBLY; Slide weight guide rods into main base and secure with:

ASSEMBLY v Slide weight guide rods into main base and secure with: 2 x (90) Allen Bolt 2 x (101) Spring Washer 2 x (98) Washer Tighten allen bolts in guide rods before proceding. Attach left and right side base (6,7) to main base (1) using: 2 x (84) Bolt 4 x (98) Washer 2 x (96) Nylon Locknut STEP 1

Page 5 - Slide the following down onto the guide rods:

ASSEMBLY NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. w Slide the following down onto the guide rods: 2 x (64) Weight Bumper 5 x (29) 15 lb plate 9 x (30) 10 lb plate 5 x (31) 5 lb plate 1 x (28) Top Plate STEP 2

Page 6 - Attach the upright to the main base using:

x ASSEMBLY NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 3 Attach the upright to the main base using: 2 x (83) Bolt 4 x (98) Washer 2 x (96) Nylon Locknut Slide top frame onto upright and weight guide rods and secure using: 2 x (81) Bolt 2 x (101)Spring Washer 2 x (9...

Page 10 - Slide into seat frame and adjust to desired level.

“ ASSEMBLY STEP 7 Attach seat pad (53) to seat support (17) using: 2 x (106) Allen Bolt 2 x (98) Washer Slide into seat frame and adjust to desired level. Attach back pad (52) to back pad rotative support (9) using: 2 x (79) Bolt 2 x (98) Washer Connect back pad rotative support (9) to back pad slid...

Page 17 - Connect necessary attachments as shown for needed exercises.; TIGHTEN ALL BOLTS AND NUTS BEFORE PROCEEDING.

ASSEMBLY 15 Connect necessary attachments as shown for needed exercises. STEP 14 TIGHTEN ALL BOLTS AND NUTS BEFORE PROCEEDING.

Page 19 - You have now completed the assembly of your new Cable Gym.

ASSEMBLY 17 You have now completed the assembly of your new Cable Gym. Included with your unit is a workout placard which shows all of the basic exercises that can be performed on the Cable Gym. This workout placard can be placed securely on either side of the weight stack shrouds for easy viewing d...

Page 20 - PARTS LIST

PARTS LIST # Description Qty 1 main base 1 2 upright 1 3 top frame 1 4 right guide rod 1 5 left guide rod 1 6 right side base 1 7 left side base 1 8 back pad slide support 1 9 back pad rotative support 1 10 right slide frame 1 11 left slide frame 1 12 weight guide rod 2 13 swivel pulley block 2 14 r...

Page 21 - EXPLODED VIEW