Keys Fitness KPS-2050 - Manuals

Step 1 Attach Right Base Frame (4) to Rear Frame (1) using two Nuts (144), four Washers (143), and two Bolts (137). Attach Left Base Frame (8) to Rear Frame (1) using two Nuts (144), four Washers (143), and two Bolts (137). Insert Guide Rods (47) into Rear Frame (1). Next, slide Weight Stack Bumpers...

Assembly 16 Step 2 Slide the weight plates down the Guide Rods (47) in this order - five 15lb Plates (52), nine 10lb Plates (53), five 5lb Plates (54), and the Top Plate (55). Note: Number of weight plates may vary depending on your spe- cific configuration. Attach Up Frame (2) to all four Guide Rod...

Assembly 17 Step 3 Attach Front Upright (19) to Seat Pad Support Receptacle (6) using two Nuts (144), four Washers (143), and two Bolts (136). Attach Seat Pad Support Receptacle (6) to Base Frame assembly using two Nuts (144), four Washers (143), and two Bolts (136). Figure 3

Step 4 Attach Main Upright (7) to Seat Pad Support Receptacle (6) using two Nuts (126), four Washers (125), and two Bolts (131). Attach Right Top Frame (5) to Up Frame assembly using two Nuts (144), four Washers (143), and two Bolts (137). Next, use two Washers (143), two Spring Washers (119), and t...

Step 5 Slide Press Station Base Frame (11) over Press Arm Support (10). Next, attach both pieces to Base Frame using two Nuts (144), four Washers (143), and two Bolts (134). Install Left Top Frame (9) over Press Arm Support (10) and Top Frame assembly. Secure top section using two Nuts (144), four W...

Assembly 20 Step 6 Attach Pec Dec Mount (21) onto Seat Pad Support Receptacle (6) using two Nuts (144), four Washers (143), and two Bolts (136). Secure in place with one Washer (129), one Spring Washer (119), and one Bolt (137). Figure 6

Assembly 21 Step 7 Attach Right and Left Leg Hold Leg Frames (29 & 30) using two Nuts (144), four Washers (143), and two Bolts (135). Figure 7

Assembly 22 Step 8 Slide the Right Pec Dec Arm (22) on to the shaft of the Pec Dec Mount (21). Secure the arm in place using one Big Washer (102), one Washer (143), one Spring Washer (119), and one Allen Bolt (128). Slide Pec Dec Handle Bar (24) onto the top of the Right Pec Dec Arm (22) and secure ...

Assembly 23 Step 9 Attach Leg Extension Lever (20) to Seat Pad Support Receptacle (6) and secure using Shaft (86), one Washer (117), one Spring Washer (118), and one Allen Bolt (98). Slide Foam Frame w/ Shaft (26) through the Leg Extension Lever (20) and attach Foam Frame w/o Shaft (25) to the other...

Assembly 33 Step 19 Note: This step is only used if you do not have the Leg Press 2 attachment. Use the Cable Adapter (124) in place of the pulley. Note: Stretch all cables out completely and make sure all twisting is removed before installing. Install Leg Press Cable Substitute (113) as detailed in...

Weight Stack Sticker Placement 42 10 10 15 20 20 25 30 40 50 60 70 80 90 100 30 35 45 55 65 75 85 95 105 115 115 125 140 155 170 130 145 160 175 190 205 220 235 250 185 200 200 LB Stack 250 LB Stack Your new POWER SYSTEM unit can be purchased with either a 200 LB or 250 LB weightstack. Depending on ...

REF# KEYS PART# DESCRIPTION QTY. REF# KEYS PART# DESCRIPTION QTY. 1 223-00258 Rear Frame 1 77 202-00024 Bearing ID25 4 2 223-00259 Up Frame 1 78 206-00150 Caster Black 2 3 223-00260 Rear Upright 1 79 206-00151 Plastic End Cap w/Groove 4 4 223-00261 Right Base Frame 1 80 206-00061 Base Pad 8 5 223-00...

Warranty Information KEYS FITNESS PRODUCTS, L.P. POWER SYSTEM SERIES LIFETIME WARRANTY This Warranty applies in the United States and Canada to products manufactured or distributed byKeys Fitness Products, LP (“Keys”) under the KEYS brand name. The warranty period to the originalpurchaser is lifetim...