Keys Fitness IT-2 - Manuals

Page 2 - Table of Contents

Table of Contents 2 Important Safety Information 3 Before You Start 4 Assembly 5-10 Operation 11-12 Exploded View 13 Parts List 14 Warranty 15

Page 3 - Important Safety Information

Important Safety Information 3 WARNING: Before beginning this or any exercise program consult your physician. This is especially important for personsover the age of 35 or persons with pre-existing health problems. Read all instructions in this manual beforeusing this product. Keys Fitness assumes n...

Page 4 - Before You Start; Before use, read instruction manual completely.

Before You Start 4 Before use, read instruction manual completely. It is extremely important to set the balance for your proper height and weight before use to avoid injury. Remove footwear before use. (You could slip out of your shoes and cause injury.) Both feet must be placed in the footrest. Fir...

Page 5 - Assembly

Page 7 - Figure 2

STEP 1 Spread the Front Support (1) and RearSupport (2) of the base apart as shownin Figure 1. Carefully push down on the two folding arms until they are fullylock in place. STEP 2 Slide the Nylon Covers (28) onto the topof the base assembly. The covers shouldextend slightly below the Side Adjustabl...

Page 8 - Figure 3

Assembly 8 STEP 3 Slide the Adjustable Frame (3) into the tube ofthe Main Frame (4). Set your desired heightusing the Black Ball Pen (12) and secure in placewith the Knob Bolt 3/4” (14). (Figure 3) Step 4 Insert the Foam Rod (9) through the holes at thebottom of the Adjustable Frame (3). Use one Hex...

Page 9 - Figure 5a

Assembly 9 Step 5 Insert Front Adjustable Frame (5) into the top of the Adjustable Frame (3). Pull the rope down and hook theend of the spring onto the Hex Bolt M6*48mm (33) as shown in Figure 5b . Figure 5a Figure 5b

Page 10 - You have completed the assembly of the IT-2 Inversion Table.; Figure 6a

Step 6 Slide a Pivot Arm (7) into each bracelocated on the left and right side of theMain Frame (4). Carefully set Unit A intothe notches at the top of Unit B. Connectthe Long Strap (30) to the Short Strap (29)as shown in Figure 6b . Last, attach the hook end of the Long Strap (30) to theweld ring o...

Page 11 - Operation

NYLON STRAPS: The straps have been included to restrict theangle of the inversion. PIVOT ARMS: The pivot arms also allow for a greater orlesser inversion degree. To adjust the positionsimply pull out on the pivot arm until thepost is out of the hole. Once the post is clearyou can slide the pivot arm...

Page 12 - MOUNTING THE INVERSION TABLE:; Figure 8

GENERAL PRECAUTIONS: 1. Make sure there is enough room for the inversion table to rotate completely. 2. Keys Fitness recommends you have someone with you while you use the machine for the first few times. 3. Make sure the Adjustable Frame is properly set to your height and secured by the Black Ball ...

Page 13 - Exploded View

Page 14 - Parts List

REF# KEYS PART# DESCRIPTION QTY. 1 223-00570 FRONT SUPPORT 1 2 223-00571 REAR SUPPORT 1 3 223-00572 ADJUSTABLE FRAME 1 4 223-00573 MAIN FRAME 1 5 219-00260 FRONT ADJUSTABLE FRAME 1 6 219-00261 FOOT FRAME 1 7 219-00262 CONNECT BUSHING 2 8 219-00263 SIDE ADJUSTABLE FRAME 2 9 219-00264 FOAM ROD 1 10 21...

Page 15 - Warranty Information; LIMITED WARRANTY

Warranty Information KEYS FITNESS PRODUCTS, LP - LIMITED WARRANTY PRODUCT: IT-2 HOME USE WARRANTY: 5 Years Parts This Limited Warranty applies in the United States and Canada to products manufactured or distributed by Keys Fitness Products, LP (“Keys”) under the KEYS brand name. The warranty period ...